ISA-WELD® - Precision Resistors AWS
BAS
Size : 8420 (metric)
ISA-WELD® - Precision Resistors TECHNICAL DATA Resistance values
0.1, 0.2, 0.5, 11 mOhm
Tolerance
5%
Temperature coefficient
< 50 ppm/K (20 °C - 60 °C)
Applicable temperature range
- 40 °C to + 170 °C
Load capacity
15 W (0.1 mOhm), 8 W (0.2 mOhm) 7 W (0.5 mOhm), 6 W (1 mOhm)
Internal heat resistance (Rthi)
From 2 K/W
Thermal EMV (0 - 60 °C )
0.3 µV/K
Inductance
< 1 nH
Stability (Nominal load) deviation TK= Terminal temperature
< 0.5 % after 2000 h (TK = 105 °C) < 1.0 % after 2000 h (TK = 140 °C)
1
Material: Aluchrom
FEATURES •
Up to 15 W permanent power
•
Continuous current load up to 350 A (0.1 mOhm)
•
High pulse power rating
•
Max. fastening torque 10 Nm
•
Shunt available with tinned or untinned terminals
•
Further versions with various dimensions upon request
BAS tinned Size 8420 metric
APPLICATION •
Current sensor for EBM (Electronic Battery Management) in motorcars, trucks, forklifts, hybrid and electric vehicles
•
Current sensing in bus bars
•
Current sensing in welding equipments
Current data sheets are available in PDF formats at our web site
e-mail: [email protected] - Internet: www.isotekcorp.com
Issue BAS-2012-10-12
1/4
BAS
Size : 8420 (metric)
TCR, power derating and long-term stability dR/R20 [%]
Temperature dependence of the electrical resistance of MANGANIN®-resistors Limiting curve Typical temperature dependence of a BAS resistor
Temperature [°C]
P / P Nom Power derating curve R = 0.1 mOhm
Improved stability < 0.5 % Stability < 1.0 %
Terminal temperature TK [°C]
Resistance change [%]
Typical long-term stability of MANGANIN®-resistors at 140 °C
Time [h]
Current data sheets are available in PDF formats at our web site
e-mail: [email protected] - Internet: www.isotekcorp.com
Issue BAS-2012-10-12
2/4
BAS
Size : 8420 (metric)
Standard version E with 0.1 mOhm
Version R with 0.1 mOhm
All dimensions in [mm]
Connection diagram
ORDERING CODE
BAS-M-R0001-E-5.0 (Standard version tinned) BAS-M-R0001-EU-5.0 (Standard version untinned) Type
Material
BAS
MANGANIN
®
Resistance value
Version
Terminals untinned
Tolerance
0.1 mOhm
E
U
5%
PACKAGING INFORMATION 100 pcs. sealed in plastic bags evacuated and refilled with dry nitrogen RoHS 2002/95/EC compliance since product launch.
For more information please visit our website: www.isabellenhuette.de
Warranty All information regarding the suitability, workability and applicability of our products, all technical advice and other information are provided to the best of our knowledge and belief, but shall not discharge the buyer from his own examinations and tests.
Current data sheets are available in PDF formats at our web site
e-mail: [email protected] - Internet: www.isotekcorp.com
Issue BAS-2012-10-12
3/4
BAS
Size : 8420 (metric)
Maximum pulse energy respectively pulse power for continuous operation
10000
1000
- - - - Single pulse ____ Pulse power for continuous operation This curve is only valid for the resistance value R0001. The shape of the curve in the range below 0.1 sec will be different for other resistance values. Therefore a separate qualification should be made for pulse power close to the above curve.
Current data sheets are available in PDF formats at our web site
e-mail: [email protected] - Internet: www.isotekcorp.com
Isotek Corporation a subsidiary of Isabellenhütte
1199 G. A. R. Highway - Swansea, MA 02777, USA - Phone 508 673 2900 - Fax: 508 676 0885
Issue BAS-2012-10-12
4/4
Size : 8420 (metric)
ISA-WELD® - Precision Resistors TECHNICAL DATA Resistance values
0.1, 0.2, 0.5, 11 mOhm
Tolerance
5%
Temperature coefficient
< 50 ppm/K (20 °C - 60 °C)
Applicable temperature range
- 40 °C to + 170 °C
Load capacity
15 W (0.1 mOhm), 8 W (0.2 mOhm) 7 W (0.5 mOhm), 6 W (1 mOhm)
Internal heat resistance (Rthi)
From 2 K/W
Thermal EMV (0 - 60 °C )
0.3 µV/K
Inductance
< 1 nH
Stability (Nominal load) deviation TK= Terminal temperature
< 0.5 % after 2000 h (TK = 105 °C) < 1.0 % after 2000 h (TK = 140 °C)
1
Material: Aluchrom
FEATURES •
Up to 15 W permanent power
•
Continuous current load up to 350 A (0.1 mOhm)
•
High pulse power rating
•
Max. fastening torque 10 Nm
•
Shunt available with tinned or untinned terminals
•
Further versions with various dimensions upon request
BAS tinned Size 8420 metric
APPLICATION •
Current sensor for EBM (Electronic Battery Management) in motorcars, trucks, forklifts, hybrid and electric vehicles
•
Current sensing in bus bars
•
Current sensing in welding equipments
Current data sheets are available in PDF formats at our web site
e-mail: [email protected] - Internet: www.isotekcorp.com
Issue BAS-2012-10-12
1/4
BAS
Size : 8420 (metric)
TCR, power derating and long-term stability dR/R20 [%]
Temperature dependence of the electrical resistance of MANGANIN®-resistors Limiting curve Typical temperature dependence of a BAS resistor
Temperature [°C]
P / P Nom Power derating curve R = 0.1 mOhm
Improved stability < 0.5 % Stability < 1.0 %
Terminal temperature TK [°C]
Resistance change [%]
Typical long-term stability of MANGANIN®-resistors at 140 °C
Time [h]
Current data sheets are available in PDF formats at our web site
e-mail: [email protected] - Internet: www.isotekcorp.com
Issue BAS-2012-10-12
2/4
BAS
Size : 8420 (metric)
Standard version E with 0.1 mOhm
Version R with 0.1 mOhm
All dimensions in [mm]
Connection diagram
ORDERING CODE
BAS-M-R0001-E-5.0 (Standard version tinned) BAS-M-R0001-EU-5.0 (Standard version untinned) Type
Material
BAS
MANGANIN
®
Resistance value
Version
Terminals untinned
Tolerance
0.1 mOhm
E
U
5%
PACKAGING INFORMATION 100 pcs. sealed in plastic bags evacuated and refilled with dry nitrogen RoHS 2002/95/EC compliance since product launch.
For more information please visit our website: www.isabellenhuette.de
Warranty All information regarding the suitability, workability and applicability of our products, all technical advice and other information are provided to the best of our knowledge and belief, but shall not discharge the buyer from his own examinations and tests.
Current data sheets are available in PDF formats at our web site
e-mail: [email protected] - Internet: www.isotekcorp.com
Issue BAS-2012-10-12
3/4
BAS
Size : 8420 (metric)
Maximum pulse energy respectively pulse power for continuous operation
10000
1000
- - - - Single pulse ____ Pulse power for continuous operation This curve is only valid for the resistance value R0001. The shape of the curve in the range below 0.1 sec will be different for other resistance values. Therefore a separate qualification should be made for pulse power close to the above curve.
Current data sheets are available in PDF formats at our web site
e-mail: [email protected] - Internet: www.isotekcorp.com
Isotek Corporation a subsidiary of Isabellenhütte
1199 G. A. R. Highway - Swansea, MA 02777, USA - Phone 508 673 2900 - Fax: 508 676 0885
Issue BAS-2012-10-12
4/4
