ISM 120/240 INVERTER SWITCHGEAR MODULE - Apollo Solar
INVERTER SWITCHGEAR MODULE All Switchgear in a Single Enclosure
ISM 120/240
The entire electronics for a battery based PV system in a single enclosure for quick, easy installation. The Apollo Solar ISM 120/240 comes factory assembled with the Inverter Breakers for DC input and AC input / output / bypass breakers, ready to add breaker Pacs from Apollo Solar for Charge Controller, GFP and Generator / Grid Selector. Thus, the AC and DC disconnects, bus bars, shunt and connectors are in a single enclosure. The installer need only connect the PV Input, Battery Cables, AC Load, and optional AC Line/Generator Input from the outside, providing a complete plug-and-play solar power switchgear package.
•
Fits all Apollo Solar Inverters: TrueSineWaveTM TSW3224 and TSW4048
•
Fits all Apollo Solar T80 or T80HV TurboChargerTM Charge Controllers
Lower Costs Using a Factory-Built Appliance The ISM can provide 240/120VAC split phase, 120VAC single phase or 230V AC power for the global market with the selection of our available AC Circuit Breaker Pacs. The ISM is easily installed into tight spaces while enabling the Apollo Solar TSW Inverters and TurboChargersTM, thus providing a complete power center with PV input.
Simply Connect PV Input, Battery Cables & AC Save time on every installation Small Footprint: 11” wide, 15” tall, 7”deep (shown installed with a TSW3224) Modular Design – One ISM per Inverter UL1741 certified, NEC compliant Inverter / Battery breaker included Slots for 18 DIN rail ½” wide breakers: • DC Breakers for Charge Controller • GFP on PV input • AC Breakers and bypass for Inverter • AC Generator / Grid input selector
The wiring box has clearly labeled connectors for the PV array input, the battery cables, and a second bypass toggle space is provided for optional generator input.
The ISM 120/240 Ships Fully Assembled with: Powder coated Aluminum cabinet and mounting hardware • Three 40Amp, 120/240 VAC, two-pole, DIN-rail breakers for AC input, inverter bypass, and AC output to load. • One F frame 250A 3/8” stud inverter DC input breaker • One Ground bus bar • One AC Neutral bus bar • One System negative terminal bus bar • One Battery positive terminal bus plate • One 500Amp/50mV shunt • AC Input and Output wires (THHN) for the TSW Inverter • Room to expand – total knock-out positions for 18 single pole ½” (13mm) wide DIN rail AC or DC breakers.
NOTE: AC NEUTRAL AND DC NEGATIVE WIRES ARE WHITE, BUT ARE SHOWN AS LIGHT GRAY.
APOLLO SOLAR TSW 3224 or TSW 3648 TRUE SINE WAVE INVERTER/CHARGER
AC OUT AC IN
APOLLO SOLAR TSW 3224
CAT-5 ETHERNET CABLE INTERNET APOLLO COMMUNICATION GATEWAY
TRUE SINE WAVE INVERTER / CHARGER
OPTIONAL REMOTE DISPLAY
ACG-1 40A MAX AWG #8
Solar Power Center
ASNET
ASNET
AC
APOLLO SHUNT BOARD
AWG #3
+BUS
AWG #3 125V DC BREAKERS
50A
50A
Parallel Stacking with T80HV
50A
RES
.5A
50A
250
50A
GFP
500A SHUNT
250A DC BREAKER
- BUS
GROUND BUS
AC NEUTRAL BUS
40A
40A
40A
40A
40A
40A
BYPASS
AC
AWG #6
DC IN
50A
APOLLO SOLAR SWITCHGEAR MODULE ENCLOSURE
TurboCharger
PV IN
BATTERY
WIRED FOR 120/240VAC SPLIT PHASE * GND NOTE: IF THIS POWER CENTER IS THE SOURCE OF THE BUILDING POWER, THE AC NEUTRAL MUST BE CONNECTED TO EARTH GROUND AT THIS POINT ONLY. IF THE SYSTEM HAS AN AC INPUT AT A CIRCUIT BREAKER BOX, THE AC NEUTRAL MUST BE TIED TO GROUND AT THAT SOURCE OF POWER ONLY.
PV ARRAY
BATTERY VOLTAGE SENSE WIRES
6V BATT
PV IN 6V BATT
APOLLO SOLAR BATTERY TEMPERATURE SENSOR
6V BATT 6V BATT
PV IN
APOLLO SOLAR T80HV PV CHARGE CONTROLLER
GND
PV INPUT (UP TO 75A) WIRES MAY BE AS LARGE AS AWG #2
BATTERY BOX AND BATTERIES (MADE BY OTHERS) IN LINE FUSE
240VAC OUT TO LOAD PANEL
4/0 GAUGE WIRE
240VAC IN FROM LINE OR GENERATOR
CHASSIS EARTH GND
L2 L1
L2 L1
NEUTRAL
NEUTRAL
AC OUT
AC IN
OPTIONAL DELTA 302R LIGHTNING ARRESTORS
BAT OUT
GND
*GND NOTE
AC BREAKERS
BATTERY MAY BE 24 OR 48V DEPENDING ON THE INVERTER. (24 VOLT VERSION SHOWN) STRINGS MAY BE TIED IN PARALLEL FOR MORE AMP-HRS.
INVERTER SWITCHGEAR MODULE WIRING DIAGRAM
Wiring Diagram of the ISM 120/240 with T80HV Charge Controller ISM 120/240 with cover removed and 4 DC Breakers installed
INVERTER SWITCHGEAR MODULE -- SPECIFICATIONS See the individual spec sheet for details of the T80 TurboChargerTM, TrueSineWaveTM Inverters and Remote Displays. Battery voltages …………. 24 or 48 VDC nominal PV Input range with T80: ….. Up to 70 Amps, 16 to 112VDC operating. 140VDC Max Open Circuit Voltage PV Input range with T80HV: .. Up to 70 Amps, 24 to 160VDC operating, 200VDC Max Open Circuit Voltage Data Comm Options …… ASNET Apollo Network available for optional Remote Displays and Internet Gateway Connectors ……………… PV input: Distribution Block accepts #14 to #2. AC: Terminals accept #14 to #6. Battery Terminals: 3/8” hex bolts accept up to a pair of #4/0 AWG cables lugs. Unit dimensions ……….…. 15“ tall X 11“ wide X 7.25“ deep. (381x280x184mm) Shipping: 19” x 12” x 11” Weight ……………………. Unit: 11 lbs. (4.8kg) Shipping weight: 16 lbs. (7.1 kg) Environmental rating …..… Indoor Type 1. Optional Accessories …....... AC Breakers for 120VAC and for 230VAC, DC Breakers and GFP pacs for the T80 and for the T80HV Charge Controllers, Remote Monitor, Generator Selector
For product or purchase inquiries contact:
23 Francis J. Clarke Circle Bethel, CT 06801 (203) 790-6400 www.ecodirect.com
www.ApolloSolar.com Specifications are subject to change without notice. August 2009
ISM 120/240
The entire electronics for a battery based PV system in a single enclosure for quick, easy installation. The Apollo Solar ISM 120/240 comes factory assembled with the Inverter Breakers for DC input and AC input / output / bypass breakers, ready to add breaker Pacs from Apollo Solar for Charge Controller, GFP and Generator / Grid Selector. Thus, the AC and DC disconnects, bus bars, shunt and connectors are in a single enclosure. The installer need only connect the PV Input, Battery Cables, AC Load, and optional AC Line/Generator Input from the outside, providing a complete plug-and-play solar power switchgear package.
•
Fits all Apollo Solar Inverters: TrueSineWaveTM TSW3224 and TSW4048
•
Fits all Apollo Solar T80 or T80HV TurboChargerTM Charge Controllers
Lower Costs Using a Factory-Built Appliance The ISM can provide 240/120VAC split phase, 120VAC single phase or 230V AC power for the global market with the selection of our available AC Circuit Breaker Pacs. The ISM is easily installed into tight spaces while enabling the Apollo Solar TSW Inverters and TurboChargersTM, thus providing a complete power center with PV input.
Simply Connect PV Input, Battery Cables & AC Save time on every installation Small Footprint: 11” wide, 15” tall, 7”deep (shown installed with a TSW3224) Modular Design – One ISM per Inverter UL1741 certified, NEC compliant Inverter / Battery breaker included Slots for 18 DIN rail ½” wide breakers: • DC Breakers for Charge Controller • GFP on PV input • AC Breakers and bypass for Inverter • AC Generator / Grid input selector
The wiring box has clearly labeled connectors for the PV array input, the battery cables, and a second bypass toggle space is provided for optional generator input.
The ISM 120/240 Ships Fully Assembled with: Powder coated Aluminum cabinet and mounting hardware • Three 40Amp, 120/240 VAC, two-pole, DIN-rail breakers for AC input, inverter bypass, and AC output to load. • One F frame 250A 3/8” stud inverter DC input breaker • One Ground bus bar • One AC Neutral bus bar • One System negative terminal bus bar • One Battery positive terminal bus plate • One 500Amp/50mV shunt • AC Input and Output wires (THHN) for the TSW Inverter • Room to expand – total knock-out positions for 18 single pole ½” (13mm) wide DIN rail AC or DC breakers.
NOTE: AC NEUTRAL AND DC NEGATIVE WIRES ARE WHITE, BUT ARE SHOWN AS LIGHT GRAY.
APOLLO SOLAR TSW 3224 or TSW 3648 TRUE SINE WAVE INVERTER/CHARGER
AC OUT AC IN
APOLLO SOLAR TSW 3224
CAT-5 ETHERNET CABLE INTERNET APOLLO COMMUNICATION GATEWAY
TRUE SINE WAVE INVERTER / CHARGER
OPTIONAL REMOTE DISPLAY
ACG-1 40A MAX AWG #8
Solar Power Center
ASNET
ASNET
AC
APOLLO SHUNT BOARD
AWG #3
+BUS
AWG #3 125V DC BREAKERS
50A
50A
Parallel Stacking with T80HV
50A
RES
.5A
50A
250
50A
GFP
500A SHUNT
250A DC BREAKER
- BUS
GROUND BUS
AC NEUTRAL BUS
40A
40A
40A
40A
40A
40A
BYPASS
AC
AWG #6
DC IN
50A
APOLLO SOLAR SWITCHGEAR MODULE ENCLOSURE
TurboCharger
PV IN
BATTERY
WIRED FOR 120/240VAC SPLIT PHASE * GND NOTE: IF THIS POWER CENTER IS THE SOURCE OF THE BUILDING POWER, THE AC NEUTRAL MUST BE CONNECTED TO EARTH GROUND AT THIS POINT ONLY. IF THE SYSTEM HAS AN AC INPUT AT A CIRCUIT BREAKER BOX, THE AC NEUTRAL MUST BE TIED TO GROUND AT THAT SOURCE OF POWER ONLY.
PV ARRAY
BATTERY VOLTAGE SENSE WIRES
6V BATT
PV IN 6V BATT
APOLLO SOLAR BATTERY TEMPERATURE SENSOR
6V BATT 6V BATT
PV IN
APOLLO SOLAR T80HV PV CHARGE CONTROLLER
GND
PV INPUT (UP TO 75A) WIRES MAY BE AS LARGE AS AWG #2
BATTERY BOX AND BATTERIES (MADE BY OTHERS) IN LINE FUSE
240VAC OUT TO LOAD PANEL
4/0 GAUGE WIRE
240VAC IN FROM LINE OR GENERATOR
CHASSIS EARTH GND
L2 L1
L2 L1
NEUTRAL
NEUTRAL
AC OUT
AC IN
OPTIONAL DELTA 302R LIGHTNING ARRESTORS
BAT OUT
GND
*GND NOTE
AC BREAKERS
BATTERY MAY BE 24 OR 48V DEPENDING ON THE INVERTER. (24 VOLT VERSION SHOWN) STRINGS MAY BE TIED IN PARALLEL FOR MORE AMP-HRS.
INVERTER SWITCHGEAR MODULE WIRING DIAGRAM
Wiring Diagram of the ISM 120/240 with T80HV Charge Controller ISM 120/240 with cover removed and 4 DC Breakers installed
INVERTER SWITCHGEAR MODULE -- SPECIFICATIONS See the individual spec sheet for details of the T80 TurboChargerTM, TrueSineWaveTM Inverters and Remote Displays. Battery voltages …………. 24 or 48 VDC nominal PV Input range with T80: ….. Up to 70 Amps, 16 to 112VDC operating. 140VDC Max Open Circuit Voltage PV Input range with T80HV: .. Up to 70 Amps, 24 to 160VDC operating, 200VDC Max Open Circuit Voltage Data Comm Options …… ASNET Apollo Network available for optional Remote Displays and Internet Gateway Connectors ……………… PV input: Distribution Block accepts #14 to #2. AC: Terminals accept #14 to #6. Battery Terminals: 3/8” hex bolts accept up to a pair of #4/0 AWG cables lugs. Unit dimensions ……….…. 15“ tall X 11“ wide X 7.25“ deep. (381x280x184mm) Shipping: 19” x 12” x 11” Weight ……………………. Unit: 11 lbs. (4.8kg) Shipping weight: 16 lbs. (7.1 kg) Environmental rating …..… Indoor Type 1. Optional Accessories …....... AC Breakers for 120VAC and for 230VAC, DC Breakers and GFP pacs for the T80 and for the T80HV Charge Controllers, Remote Monitor, Generator Selector
For product or purchase inquiries contact:
23 Francis J. Clarke Circle Bethel, CT 06801 (203) 790-6400 www.ecodirect.com
www.ApolloSolar.com Specifications are subject to change without notice. August 2009
