ISO 15407-1 W66 Series Solenoid Pilot Controlled Valves
ISO 15407-1 W66 Series
Solenoid Pilot Controlled Valves
A
5-Way 3-Position Valves, Double Solenoid Pilot Controlled HOW TO ORDER
A1
(Choose your options (in red) to configure your valve model number.)
W66 77 A 0 4 61
W Voltage
Options
ISO Size 00 (18mm)
0
0 (26mm)
1
Non-Locking Internal Pilot Closed Overrides External Pilot Center Internal Pilot Locking Overrides External Pilot Power Center
4
5
2
1
#12
#14
Locking Overrides
4
5
3
61 81 71 91
W
120 VAC
Z
Internal Pilot - 73
2
1
#12
-
93 67 87 77 97 #14
4
3
5
Power Center
Closed Center
24 VDC
Non-Locking Internal Pilot - 63 Overrides External Pilot - 83
External Pilot Non-Locking Internal Pilot Overrides External Pilot Open Center Internal Pilot Locking Overrides External Pilot #14
-
2
1
#12
3
Open Center
Valve Dimensions – inches (mm)
Technical Information ISO Size
Avg. CV
Weight lb (kg)
00 (18mm)
0.55
0.4 (0.16)
0 (26mm)
1.1
0.6 (0.25)
0.72 (18)
ISO Size 00 (18mm)
4.43 (113) 2.40 (61)
2.22 (56)
1.68 (43)
Mounting Screws
ISO Size 0 (26mm)
1.02 (26)
5.10 (130) 2.40 (61)
2.55 (65)
1.66 (42)
Mounting Screws
* Sub-bases and sub-base manifolds ordered separately, refer to page A1.5-A1.6. Accessories ordered separately, refer to page A1.6.
STANDARD SPECIFICATIONS (for valves on this page): Construction: Spool and sleeve. Solenoids: Bi-polar, surge suppression (standard), indicator lights. Standard Voltages: 1.0, 24 volts DC; 2.0 VA, 120 volts AC. Flow Media: Filtered air; 5 micron recommended. Operating Pressure: Vacuum to 145 psig (9.9 bar). Minimum Operating Pressure: 2-position: 20 psig (1.37 bar). 3-position: 30 psig (2.07 bar).
Manifolds: Terminal Block Wiring (HA Only). Collective Wiring: 25-Pin' D-Sub; 19-Pin Round; 16 Point Terminal Strip; M23, 12-Pin; Isysnet Field Bus. Materials of Construction: Valve Body: Die Cast Aluminum. End Caps: Polybutylene Terephthalate (PBT). Fasteners: Zinc Plated Steel. Coils: Thermoset Plastic.
IMPORTANT NOTE: Please read carefully and thoroughly all of the CAUTIONS, WARNINGS on the inside back cover.
A1.4
© 2016, ROSS CONTROLS®. All Rights Reserved.
Online Version Rev. 11/14/16
Single Sub-Bases Sub-Base Manifolds & End Plate Kits
for ISO 15407-1 W66 Series
Individual Sub-Base Kit with Side Ports ISO Size
Port Size
00 (18mm) 0 (26mm)
#2 Port #4 Port
Model Number* NPT Threads
BSPP Threads
1/8
RPL02-01-80
RPL02-01-70
1/4
RPL01-02-80
RPL01-02-70
A1
#14 Port
* Can be used for external, single, or double remote pilot.
#5 Port
Port Size
00 (18mm)
1/8
Model Number* NPT Threads
BSPP Threads
RPJLP02-201-80
RPJLP02-201-70
*Can be used for external pilot supply, cannot be used with pressure controlled valves. Note: Gaskets and assembly hardware included.
#1 Port
#3 Port
EXH (#12) Galley #2 Port
Two Station Manifold Base with Side Ports ISO Size
A
#12 Port
RPJLP02
#14 Port
#4 Port
#5 Galley DIN Rail Mount #3 #1 Galley Galley
#5 Galley
#3 Galley
#2 Port
Two Station Manifold Base with Side Ports ISO Size
Port Size
0 (26mm)
1/4
#4 Port
Model Number* NPT Threads
BSPP Threads
RPJLP01-202-80
RPJLP01-202-70
RPJLP01
* Can be used for external pilot supply, or can be used with pressure controlled valves. Note: Gaskets and assembly hardware included.
#14 Port DIN Rail Mount
#1 Galley
#12 Port
Common Exhaust Port
#12 Port
End Plate Kit for Side Ported Two Station Manifold Base End Stations Kit Number
#14 Port
ISO Size
Port Size
00 (18mm)
1/4
RPEJ02-02-80*
RPEJ02-02-80*
0 (26mm)
3/8
RPEJ01-03-80
RPEJ01-03-80
NPT Threads
#3 Port
BSPP Threads
†
#1 Port #5 Port DIN Rail Mount
RPEJ02
#3 Port #1 Port #5 Port
†
* Use with RPJLP02...... † Use with RPJLP01 or RPJL01......
RPEJ01
DIN Rail Mount
EXH Port
IMPORTANT NOTE: Please read carefully and thoroughly all of the CAUTIONS, WARNINGS on the inside back cover. Online Version Rev. 11/14/16
www.rosscontrols.com
A1.5
for ISO 15407-1 Valves W66 Series
Accessories
A A1
Interposed Pressure Regulators
Gauge Adapter Kit
Remote Air Pilot Operated for hard-to-reach pressure control Unregulated Pilot Pressure to valve for consistent valve shifting regardless of pressure adjustment.
Included with all Size 00 Regulators. Both kits are required on all Size 0 & 00 Regulators when the Regulator is on the last Station on the Right (14) End. Description
Size 00 - 18mm (Dual Interposed Regulator Shown)
Size 0 - 26mm (Single Interposed Regulator Shown)
Gauge Kit
RPS5651160P
1/8" Female to 1/8" Female Coupling
R207P-2*
1/8" Male to 1/8" Male Long Nipple
RVS215PNL-2-15*
* Included in Gauge Kit RPS5651160P.
HOW TO ORDER
Interposed Flow Controls
(Choose your options (in red) to configure your valve model number.)
R
PS5637 1 6
6 P #2 Port Regulator / Gauge*
Basic Series ISO Size 00 (18mm) PS5637 ISO Size 0 (26mm) PS5537
Regulator Function Common Pressure Regulator 1 Independent Pressure Regulator 2
Part Number
#4 Port Regulator / Gauge*
2-60 PSIG w/o Gauge
2
2-60 PSIG w/o Gauge
2
5-125 PSIG w/o Gauge
3
5-125 PSIG w/o Gauge 2-60 PSIG w/Gauge 5-125 PSIG w/Gauge
3 5 6
2-60 PSIG w/Gauge
5
5-125 PSIG w/Gauge
6
Both adjustment screws are located on the 12 end of the unit. Interposed Flow Control mounts with its own studs, which means the valve uses standard bolts for mounting. Interposed Flow Control is not to be used as a shut off device and is not bubble tight when needles are fully turned down.
* For Common Pressure Regulator Option, Regulator Gauge callout must be the same number for both Port #4 and Port #2. (Example: 166)
Interposed Supply & Exhaust Modules
ISO Size
Part Number
00 (18mm)
RPS5642P
0 (26mm)
RPS5542P
Intermediate Air Supply Bases
Part Number
ISO Size
NPT Threads
BSPP Threads
RPS562600P
RPS562601P
Exhaust
RPS562700P
Supply
RPS552600P
Exhaust
RPS552700P
RPS552701P
00 (18mm)
Supply
00 (18mm) 0 (26mm) 0 (26mm)
Part Number
ISO Size
Port Size
NPT Threads
RPS562701P
00 (18mm)
1/8"
RD02P-01-80
RPS552601P
0 (26mm)
1/4"
RD01P-02-80
Kit includes: Gasket and Mounting Bolts.
Quantity 1. Used on Size 00 & Size 0 valves to provide a pressure or exhaust path to individual valves.
Blank Station Kits ISO Size
Kit Number
00 (18mm)
RDX02BLK
0 (26mm)
RDX01BLK
Manifold Port Isolation Kits Main Galley (1, 3, 5)
Kit includes: Blank Station Plate, Gasket, and Mounting Bolts.
ISO Size
Kit Number
00 (18mm)
RD02BD0
0 (26mm)
RD01BD0
2
4
2
Kit includes: Plugs with O-rings.
4
Size 0 Main Galley
Size 00 Main Galley
Silencers Port Size
Thread Type
Model Number NPT Threads
BSPT Threads
Avg. CV
Dimensions inches (mm) A
B
Weight lb (kg)
1/8
Male
5500A1003
D5500A1003
1.2
0.9 (21)
2.0 (51)
0.1 (0.1)
1/4
Male
5500A2003
D5500A2003
2.1
0.9 (21)
2.2 (55)
0.1 (0.1)
3/8
Male
5500A3013
D5500A3013
2.7
0.9 (21)
2.2 (55)
0.1 (0.1)
A
B
Pressure Range: 0 to 150 psig (0 to 10.3 bar) maximum. Flow Media: Filtered air.
IMPORTANT NOTE: Please read carefully and thoroughly all of the CAUTIONS, WARNINGS on the inside back cover.
A1.6
© 2016, ROSS CONTROLS®. All Rights Reserved.
Online Version Rev. 11/14/16
Solenoid Pilot Controlled Valves
A
5-Way 3-Position Valves, Double Solenoid Pilot Controlled HOW TO ORDER
A1
(Choose your options (in red) to configure your valve model number.)
W66 77 A 0 4 61
W Voltage
Options
ISO Size 00 (18mm)
0
0 (26mm)
1
Non-Locking Internal Pilot Closed Overrides External Pilot Center Internal Pilot Locking Overrides External Pilot Power Center
4
5
2
1
#12
#14
Locking Overrides
4
5
3
61 81 71 91
W
120 VAC
Z
Internal Pilot - 73
2
1
#12
-
93 67 87 77 97 #14
4
3
5
Power Center
Closed Center
24 VDC
Non-Locking Internal Pilot - 63 Overrides External Pilot - 83
External Pilot Non-Locking Internal Pilot Overrides External Pilot Open Center Internal Pilot Locking Overrides External Pilot #14
-
2
1
#12
3
Open Center
Valve Dimensions – inches (mm)
Technical Information ISO Size
Avg. CV
Weight lb (kg)
00 (18mm)
0.55
0.4 (0.16)
0 (26mm)
1.1
0.6 (0.25)
0.72 (18)
ISO Size 00 (18mm)
4.43 (113) 2.40 (61)
2.22 (56)
1.68 (43)
Mounting Screws
ISO Size 0 (26mm)
1.02 (26)
5.10 (130) 2.40 (61)
2.55 (65)
1.66 (42)
Mounting Screws
* Sub-bases and sub-base manifolds ordered separately, refer to page A1.5-A1.6. Accessories ordered separately, refer to page A1.6.
STANDARD SPECIFICATIONS (for valves on this page): Construction: Spool and sleeve. Solenoids: Bi-polar, surge suppression (standard), indicator lights. Standard Voltages: 1.0, 24 volts DC; 2.0 VA, 120 volts AC. Flow Media: Filtered air; 5 micron recommended. Operating Pressure: Vacuum to 145 psig (9.9 bar). Minimum Operating Pressure: 2-position: 20 psig (1.37 bar). 3-position: 30 psig (2.07 bar).
Manifolds: Terminal Block Wiring (HA Only). Collective Wiring: 25-Pin' D-Sub; 19-Pin Round; 16 Point Terminal Strip; M23, 12-Pin; Isysnet Field Bus. Materials of Construction: Valve Body: Die Cast Aluminum. End Caps: Polybutylene Terephthalate (PBT). Fasteners: Zinc Plated Steel. Coils: Thermoset Plastic.
IMPORTANT NOTE: Please read carefully and thoroughly all of the CAUTIONS, WARNINGS on the inside back cover.
A1.4
© 2016, ROSS CONTROLS®. All Rights Reserved.
Online Version Rev. 11/14/16
Single Sub-Bases Sub-Base Manifolds & End Plate Kits
for ISO 15407-1 W66 Series
Individual Sub-Base Kit with Side Ports ISO Size
Port Size
00 (18mm) 0 (26mm)
#2 Port #4 Port
Model Number* NPT Threads
BSPP Threads
1/8
RPL02-01-80
RPL02-01-70
1/4
RPL01-02-80
RPL01-02-70
A1
#14 Port
* Can be used for external, single, or double remote pilot.
#5 Port
Port Size
00 (18mm)
1/8
Model Number* NPT Threads
BSPP Threads
RPJLP02-201-80
RPJLP02-201-70
*Can be used for external pilot supply, cannot be used with pressure controlled valves. Note: Gaskets and assembly hardware included.
#1 Port
#3 Port
EXH (#12) Galley #2 Port
Two Station Manifold Base with Side Ports ISO Size
A
#12 Port
RPJLP02
#14 Port
#4 Port
#5 Galley DIN Rail Mount #3 #1 Galley Galley
#5 Galley
#3 Galley
#2 Port
Two Station Manifold Base with Side Ports ISO Size
Port Size
0 (26mm)
1/4
#4 Port
Model Number* NPT Threads
BSPP Threads
RPJLP01-202-80
RPJLP01-202-70
RPJLP01
* Can be used for external pilot supply, or can be used with pressure controlled valves. Note: Gaskets and assembly hardware included.
#14 Port DIN Rail Mount
#1 Galley
#12 Port
Common Exhaust Port
#12 Port
End Plate Kit for Side Ported Two Station Manifold Base End Stations Kit Number
#14 Port
ISO Size
Port Size
00 (18mm)
1/4
RPEJ02-02-80*
RPEJ02-02-80*
0 (26mm)
3/8
RPEJ01-03-80
RPEJ01-03-80
NPT Threads
#3 Port
BSPP Threads
†
#1 Port #5 Port DIN Rail Mount
RPEJ02
#3 Port #1 Port #5 Port
†
* Use with RPJLP02...... † Use with RPJLP01 or RPJL01......
RPEJ01
DIN Rail Mount
EXH Port
IMPORTANT NOTE: Please read carefully and thoroughly all of the CAUTIONS, WARNINGS on the inside back cover. Online Version Rev. 11/14/16
www.rosscontrols.com
A1.5
for ISO 15407-1 Valves W66 Series
Accessories
A A1
Interposed Pressure Regulators
Gauge Adapter Kit
Remote Air Pilot Operated for hard-to-reach pressure control Unregulated Pilot Pressure to valve for consistent valve shifting regardless of pressure adjustment.
Included with all Size 00 Regulators. Both kits are required on all Size 0 & 00 Regulators when the Regulator is on the last Station on the Right (14) End. Description
Size 00 - 18mm (Dual Interposed Regulator Shown)
Size 0 - 26mm (Single Interposed Regulator Shown)
Gauge Kit
RPS5651160P
1/8" Female to 1/8" Female Coupling
R207P-2*
1/8" Male to 1/8" Male Long Nipple
RVS215PNL-2-15*
* Included in Gauge Kit RPS5651160P.
HOW TO ORDER
Interposed Flow Controls
(Choose your options (in red) to configure your valve model number.)
R
PS5637 1 6
6 P #2 Port Regulator / Gauge*
Basic Series ISO Size 00 (18mm) PS5637 ISO Size 0 (26mm) PS5537
Regulator Function Common Pressure Regulator 1 Independent Pressure Regulator 2
Part Number
#4 Port Regulator / Gauge*
2-60 PSIG w/o Gauge
2
2-60 PSIG w/o Gauge
2
5-125 PSIG w/o Gauge
3
5-125 PSIG w/o Gauge 2-60 PSIG w/Gauge 5-125 PSIG w/Gauge
3 5 6
2-60 PSIG w/Gauge
5
5-125 PSIG w/Gauge
6
Both adjustment screws are located on the 12 end of the unit. Interposed Flow Control mounts with its own studs, which means the valve uses standard bolts for mounting. Interposed Flow Control is not to be used as a shut off device and is not bubble tight when needles are fully turned down.
* For Common Pressure Regulator Option, Regulator Gauge callout must be the same number for both Port #4 and Port #2. (Example: 166)
Interposed Supply & Exhaust Modules
ISO Size
Part Number
00 (18mm)
RPS5642P
0 (26mm)
RPS5542P
Intermediate Air Supply Bases
Part Number
ISO Size
NPT Threads
BSPP Threads
RPS562600P
RPS562601P
Exhaust
RPS562700P
Supply
RPS552600P
Exhaust
RPS552700P
RPS552701P
00 (18mm)
Supply
00 (18mm) 0 (26mm) 0 (26mm)
Part Number
ISO Size
Port Size
NPT Threads
RPS562701P
00 (18mm)
1/8"
RD02P-01-80
RPS552601P
0 (26mm)
1/4"
RD01P-02-80
Kit includes: Gasket and Mounting Bolts.
Quantity 1. Used on Size 00 & Size 0 valves to provide a pressure or exhaust path to individual valves.
Blank Station Kits ISO Size
Kit Number
00 (18mm)
RDX02BLK
0 (26mm)
RDX01BLK
Manifold Port Isolation Kits Main Galley (1, 3, 5)
Kit includes: Blank Station Plate, Gasket, and Mounting Bolts.
ISO Size
Kit Number
00 (18mm)
RD02BD0
0 (26mm)
RD01BD0
2
4
2
Kit includes: Plugs with O-rings.
4
Size 0 Main Galley
Size 00 Main Galley
Silencers Port Size
Thread Type
Model Number NPT Threads
BSPT Threads
Avg. CV
Dimensions inches (mm) A
B
Weight lb (kg)
1/8
Male
5500A1003
D5500A1003
1.2
0.9 (21)
2.0 (51)
0.1 (0.1)
1/4
Male
5500A2003
D5500A2003
2.1
0.9 (21)
2.2 (55)
0.1 (0.1)
3/8
Male
5500A3013
D5500A3013
2.7
0.9 (21)
2.2 (55)
0.1 (0.1)
A
B
Pressure Range: 0 to 150 psig (0 to 10.3 bar) maximum. Flow Media: Filtered air.
IMPORTANT NOTE: Please read carefully and thoroughly all of the CAUTIONS, WARNINGS on the inside back cover.
A1.6
© 2016, ROSS CONTROLS®. All Rights Reserved.
Online Version Rev. 11/14/16
