JLG Model 644E-42 Telehandler Spec Sheet - We Rent It
Model
644E-42 telehANDLER
Performance
Axles Full-time planetary 4-wheel drive. Rated Capacity Limited slip front differential. 6,000 lb (2,722 kg) Stabil-Trak rear axle stability system. Maximum Lift Height Service Brakes 42 ft (12.8 m) Inboard mounted internal wet disc brakes. Frame Leveling Parking Brakes 12 degrees Spring applied, hydraulically released parking brake with transmission declutch feature. Lift Speed (boom retracted) Tires Up: 12.5 sec Standard: 370/75-28. Down: 11.5 sec Fenders Boom Speed (no load) Cab Extend: 12.5 sec Certified ROPS/FOPS structure. Retracted: 13.5 sec Steering wheel mounted horn and Travel Speed Forward back-up alarm. 20 mph (32 kmph) max. Rear view mirrors. Drawbar Pull (loaded) Steering 18,600 lb (8,437 kg) 4-wheel circle, 4-wheel crab, 2-wheel front. Operating Weight Instruments With 50 in. Carriage and Forks Hydraulic oil temperature, fuel level, tachometer, 24,467 lb (11,098 kg) and hourmeter gauges. Forward Reach Warning indicators for transmission oil 35 ft 6 in. (10.8 m) temperature, hydraulic oil temperature, engine Horizontal Load Placement oil pressure, alternator charging, air filter 80 in. (2.0 m) restriction, hydraulic oil filter restriction, and low brake pressure. Indicators for parking brake, and Standard Specifications Stabil-Trak System. Controls Engine Multi-function, fully proportional pilot operated Make and Model Cummins B4.5T Turbo joystick controls for boom functions, carriage tilt, Fuel Diesel auxiliary control, frame leveling, and horizontal Cycles 4 load placement system. No. of Cylinders 4 Hydraulic System Displacement 276 cu in (4.5 L) Load sensing dual gear pump. Torque Rating 305 lb ft (414 Nm) 50.2 gal (190 L) system capacity. Auxiliary Hydraulics @ 1,500 rpm Used for all attachments equipped with Rated Speed 2,500 rpm cylinders or other hydraulic components. Max. Gross BHP 99 hp (74 kW) Consists of valves, controls and hydraulic lines. Fuel Tank 46 gal (174 L) Engine Filters Accessories & Options Two-stage centrifugal air cleaner. Serviceable fuel filter/water separator. Enclosed Cab Full-flow replaceable-element engine oil filter. Air Conditioning Electrical System Work Lights Voltage: 12V Road Lights Alternator: 65 amp Rotating Beacon Battery: 850 cold cranking amps at 0°F Tire Options Transmission Foam-filled Modulated powershift with integral full Solid gear-drive dropbox. 4-speed forward and 3-speed reverse.
Attachments Standard Carriage 50 in. (1.3 m) or 60 in. (1.5m) or 72 in. (1.8 m) Side Tilt Carriage 50 in. (1.3 m) or 60 in. (1.5 m) or 72 in. (1.8 m) Swing Carriage 72 in. (1.8 m); 90 degrees Side-Shift Carriage 50 in. (1.3 m) Dual Fork Positioning Carriage Tower 8 ft (2.4 m), 50 in. (1.3 m) Standard Carriage Pallet Forks 2.36 x 4 x 48 in. (60 mm x 102 mm x 1.2 m) 2.36 x 5 x 48 in. (60 mm x 127 mm x 1.2 m) 2.00 x 6 x 72 in. (51 mm x 152 mm x 1.8 m) Lumber Forks 1.75 x 7 x 60 in. (44 mm x 178 mm x 1.2 m) 2.36 x 6 x 60 in. (60 mm x 152 mm x 1.5 m) Cubing Forks 2 x 2 x 48 in. (51 mm x 51 mm x 1.2 m) Fork Extensions 90 in. (2.3 m) Material Bucket 72 in. (1.8 m), 1.0 cu yd ((0.76 m3) 96 in. (2.4 m), 1.5 cu yd (1.15 m3) 102 in. (2.6 m, )2.0 cu yd (1.53 m3) Grapple Bucket 96 in. (2.4 m), 1.75 cu yd (1.34 m3) Truss Boom 12 ft (3.7 m), 2,000 lb (907 kg) capacity 15 ft (4.6 m), 2,000 lb (907 kg) capacity 12 ft (3.7 m) with winch, 2,000 lb (907 kg) capacity Fork Mounted Work Platform 8 ft (2.4 m), 1,000 lb (455 kg) capacity Lifting Hook
-8 ft (-2.4 m)
-8 ft (-2.4 m)
Model
644E-42 telehANDLER
LULL 644E
LULL 644E
T E L E H A N D L E R
T E L E H A N D L E R
44 ft (13.4 m)
4 ft
0 ft
36 ft 32 ft 48 ft (14.6 m)
40 ft (12.2 m)
E D
32 ft (9.8 m)
4,000 lb (1,814 kg)
30°
4 ft (1.2 m)
0°
0 ft (0 m)
A
20 ft (6.1 m)
12 ft (3.7 m)
RETRACTED
8 ft (2.4 m)
LULL 644E T E L E H A N D L E R
28 ft
24 ft
16 ft
20 ft
44 ft (13.4 m)
60°
40 ft (12.2 m)
12 ft
40 ft 36 ft 32 ft 28 ft 24 ft 20 ft 16 ft 12 ft 48 ftRated (14.6 m) lift capacities shown are with machine equipped
Machine specifications and stability are based 60°on rated capacities at specific boom angles and boom lengths. 40 ftlift (12.2 m) (If specifications are critical, the proposed application 50° 36 ftshould (11.0 m)be discussed with your dealer.) DO NOT exceed rated lift capacity loads, as unstable and machine conditions will result. 32 ft (9.8dangerous m) 40°forward to determine the DO NOT tip the machine allowable 28 ft (8.5 m) load. Use only JLG approved attachments with proper material 24 ft (7.3 m)model/attachment handler 30° load capacity charts displayed in the operator’s cab. OSHA requires all rough terrain forklift 20 ft (6.1 m)operators be trained according to OSHA 29 CFR 1910.178 (1).
C 4,000 lb (1,814 kg)
B A
16 ft (4.9 m)
3,000 lb (1,361 kg)
2,000 lb (907 kg)
1,000 lb (454 kg)
300 lb (136 kg)
4 ft (1.2 m)
EXTENDED
80 in. (2.0 m)
1 in. (2.5 cm)
20°
12 ft (3.7 m) 8 ft (2.4 m)
10°
4 ft (1.2 m)
0°
0 ft (0 m)
-5°
-4 ft (-1.2 m)
-8 ft (-2.4 m)
F E D C B A
EXTENDE
0° -5°
-8 ft (-2.4 m)
Due to continuous product improvements, JLG Industries reserves the right to make specification and/or equipment changes without prior notification. This machine meets or exceeds ASME B56.6-1998 as originally manufactured for intended applications.
LULL 644E
Form No.: SS-L644E-42-0104-15M Part No.: 3132500 R011305 Printed in USA
T E L E H A N D L E R
36 ft 32 ft 48 ft (14.6 m)
0 ft
66°
40°
20°
4 ft
with carriage and pallet forks. The machine must be level
E
30°
8 ft
44 fton (13.4 m) surface with undamaged, properly inflated tires. a firm
F
20 ft (6.1 m)
-4 ft (-1.2 m)
IMPORTANT
0 ft
66°
28 ft (8.5 m)
0 ft (0 m)
4 ft
D
32 ft (9.8 m)
8 ft (2.4 m)
8 ft
50°
36 ft (11.0 m)
10°
RETRACTED
-8 ft (-2.4 m)
36 ft 32 ft
12 ft (3.7 m)
0 ft
-5°
-4 ft (-1.2 m)
T E L E H A N D L E R
16 ft (4.9 m)
0°
0 ft (0 m)
LULL 644E
24 ft (7.3 m)
10°
4 ft (1.2 m)
-8 ft (-2.4 m)
40 ft 48 ft (14.6 m)
20°
16 ft (4.9 m)
-5°
-4 ft (-1.2 m)
4 ft
4,000 lb (1,814 kg)
8 ft (2.4 m)
8 ft
3,000 lb (1,361 kg)
10°
1,500 lb (680 kg)
12 ft (3.7 m)
12 ft
2,000 lb (907 kg)
16 ft (4.9 m)
2,000 lb (907 kg)
20°
3,000 lb (1,361 kg)
20 ft (6.1 m)
B
1,000 lb (454 kg)
24 ft (7.3 m)
C
6,000 lb (2,722 kg)
40°
28 ft (8.5 m)
16 ft
20 ft
(less forks) 253 in. (6.4366° m) 60° Width 98 in. (2.48 m) F 40 ft (12.2 m) Height 95.5 in. (2.43 m) E 50° 36 ft (11.0 m) Wheelbase 131 in. (3.32 m) D 16 in. (406 mm) 32 ft Ground (9.8 m) Clearance C Outside Turning Radius 40° 148 in. (3.75 m) 28 ft (8.5 m) Max. Reach from Front Tires B 24 ft to (7.324 m) in. (609 mm) 30° A Load Center 35.5 ft/29 ft (10.82 m/8.83 m)
F
50°
36 ft (11.0 m)
24 ft
44 ft (13.4 m) Length
66° 60°
28 ft
Dimensions
6,000 lb (2,722 kg)
8 ft
4,000 lb (1,814 kg)
12 ft
3,000 lb (1,361 kg)
16 ft
20 ft
2,000 lb (907 kg)
24 ft
1,500 lb (680 kg)
28 ft
300 lb (136 kg)
36 ft 32 ft 48 ft (14.6 m)
JLG Industries, Inc. 1 JLG Drive McConnellsburg, PA 17233-9533 Telephone 717-485-5161 Toll-free in US 877-JLG-LIFT Fax 717-485-6417 www.jlg.com An Oshkosh Corporation Company LULL 644E T E L E H A N D L E R
28 ft
24 ft
20 ft
16 ft
12 ft
8 ft
4 ft
0 ft
36 ft 32 ft 48 ft (14.6 m)
28 ft
24 ft
20 ft
16 ft
12 ft
8 ft
4 ft
0 ft
644E-42 telehANDLER
Performance
Axles Full-time planetary 4-wheel drive. Rated Capacity Limited slip front differential. 6,000 lb (2,722 kg) Stabil-Trak rear axle stability system. Maximum Lift Height Service Brakes 42 ft (12.8 m) Inboard mounted internal wet disc brakes. Frame Leveling Parking Brakes 12 degrees Spring applied, hydraulically released parking brake with transmission declutch feature. Lift Speed (boom retracted) Tires Up: 12.5 sec Standard: 370/75-28. Down: 11.5 sec Fenders Boom Speed (no load) Cab Extend: 12.5 sec Certified ROPS/FOPS structure. Retracted: 13.5 sec Steering wheel mounted horn and Travel Speed Forward back-up alarm. 20 mph (32 kmph) max. Rear view mirrors. Drawbar Pull (loaded) Steering 18,600 lb (8,437 kg) 4-wheel circle, 4-wheel crab, 2-wheel front. Operating Weight Instruments With 50 in. Carriage and Forks Hydraulic oil temperature, fuel level, tachometer, 24,467 lb (11,098 kg) and hourmeter gauges. Forward Reach Warning indicators for transmission oil 35 ft 6 in. (10.8 m) temperature, hydraulic oil temperature, engine Horizontal Load Placement oil pressure, alternator charging, air filter 80 in. (2.0 m) restriction, hydraulic oil filter restriction, and low brake pressure. Indicators for parking brake, and Standard Specifications Stabil-Trak System. Controls Engine Multi-function, fully proportional pilot operated Make and Model Cummins B4.5T Turbo joystick controls for boom functions, carriage tilt, Fuel Diesel auxiliary control, frame leveling, and horizontal Cycles 4 load placement system. No. of Cylinders 4 Hydraulic System Displacement 276 cu in (4.5 L) Load sensing dual gear pump. Torque Rating 305 lb ft (414 Nm) 50.2 gal (190 L) system capacity. Auxiliary Hydraulics @ 1,500 rpm Used for all attachments equipped with Rated Speed 2,500 rpm cylinders or other hydraulic components. Max. Gross BHP 99 hp (74 kW) Consists of valves, controls and hydraulic lines. Fuel Tank 46 gal (174 L) Engine Filters Accessories & Options Two-stage centrifugal air cleaner. Serviceable fuel filter/water separator. Enclosed Cab Full-flow replaceable-element engine oil filter. Air Conditioning Electrical System Work Lights Voltage: 12V Road Lights Alternator: 65 amp Rotating Beacon Battery: 850 cold cranking amps at 0°F Tire Options Transmission Foam-filled Modulated powershift with integral full Solid gear-drive dropbox. 4-speed forward and 3-speed reverse.
Attachments Standard Carriage 50 in. (1.3 m) or 60 in. (1.5m) or 72 in. (1.8 m) Side Tilt Carriage 50 in. (1.3 m) or 60 in. (1.5 m) or 72 in. (1.8 m) Swing Carriage 72 in. (1.8 m); 90 degrees Side-Shift Carriage 50 in. (1.3 m) Dual Fork Positioning Carriage Tower 8 ft (2.4 m), 50 in. (1.3 m) Standard Carriage Pallet Forks 2.36 x 4 x 48 in. (60 mm x 102 mm x 1.2 m) 2.36 x 5 x 48 in. (60 mm x 127 mm x 1.2 m) 2.00 x 6 x 72 in. (51 mm x 152 mm x 1.8 m) Lumber Forks 1.75 x 7 x 60 in. (44 mm x 178 mm x 1.2 m) 2.36 x 6 x 60 in. (60 mm x 152 mm x 1.5 m) Cubing Forks 2 x 2 x 48 in. (51 mm x 51 mm x 1.2 m) Fork Extensions 90 in. (2.3 m) Material Bucket 72 in. (1.8 m), 1.0 cu yd ((0.76 m3) 96 in. (2.4 m), 1.5 cu yd (1.15 m3) 102 in. (2.6 m, )2.0 cu yd (1.53 m3) Grapple Bucket 96 in. (2.4 m), 1.75 cu yd (1.34 m3) Truss Boom 12 ft (3.7 m), 2,000 lb (907 kg) capacity 15 ft (4.6 m), 2,000 lb (907 kg) capacity 12 ft (3.7 m) with winch, 2,000 lb (907 kg) capacity Fork Mounted Work Platform 8 ft (2.4 m), 1,000 lb (455 kg) capacity Lifting Hook
-8 ft (-2.4 m)
-8 ft (-2.4 m)
Model
644E-42 telehANDLER
LULL 644E
LULL 644E
T E L E H A N D L E R
T E L E H A N D L E R
44 ft (13.4 m)
4 ft
0 ft
36 ft 32 ft 48 ft (14.6 m)
40 ft (12.2 m)
E D
32 ft (9.8 m)
4,000 lb (1,814 kg)
30°
4 ft (1.2 m)
0°
0 ft (0 m)
A
20 ft (6.1 m)
12 ft (3.7 m)
RETRACTED
8 ft (2.4 m)
LULL 644E T E L E H A N D L E R
28 ft
24 ft
16 ft
20 ft
44 ft (13.4 m)
60°
40 ft (12.2 m)
12 ft
40 ft 36 ft 32 ft 28 ft 24 ft 20 ft 16 ft 12 ft 48 ftRated (14.6 m) lift capacities shown are with machine equipped
Machine specifications and stability are based 60°on rated capacities at specific boom angles and boom lengths. 40 ftlift (12.2 m) (If specifications are critical, the proposed application 50° 36 ftshould (11.0 m)be discussed with your dealer.) DO NOT exceed rated lift capacity loads, as unstable and machine conditions will result. 32 ft (9.8dangerous m) 40°forward to determine the DO NOT tip the machine allowable 28 ft (8.5 m) load. Use only JLG approved attachments with proper material 24 ft (7.3 m)model/attachment handler 30° load capacity charts displayed in the operator’s cab. OSHA requires all rough terrain forklift 20 ft (6.1 m)operators be trained according to OSHA 29 CFR 1910.178 (1).
C 4,000 lb (1,814 kg)
B A
16 ft (4.9 m)
3,000 lb (1,361 kg)
2,000 lb (907 kg)
1,000 lb (454 kg)
300 lb (136 kg)
4 ft (1.2 m)
EXTENDED
80 in. (2.0 m)
1 in. (2.5 cm)
20°
12 ft (3.7 m) 8 ft (2.4 m)
10°
4 ft (1.2 m)
0°
0 ft (0 m)
-5°
-4 ft (-1.2 m)
-8 ft (-2.4 m)
F E D C B A
EXTENDE
0° -5°
-8 ft (-2.4 m)
Due to continuous product improvements, JLG Industries reserves the right to make specification and/or equipment changes without prior notification. This machine meets or exceeds ASME B56.6-1998 as originally manufactured for intended applications.
LULL 644E
Form No.: SS-L644E-42-0104-15M Part No.: 3132500 R011305 Printed in USA
T E L E H A N D L E R
36 ft 32 ft 48 ft (14.6 m)
0 ft
66°
40°
20°
4 ft
with carriage and pallet forks. The machine must be level
E
30°
8 ft
44 fton (13.4 m) surface with undamaged, properly inflated tires. a firm
F
20 ft (6.1 m)
-4 ft (-1.2 m)
IMPORTANT
0 ft
66°
28 ft (8.5 m)
0 ft (0 m)
4 ft
D
32 ft (9.8 m)
8 ft (2.4 m)
8 ft
50°
36 ft (11.0 m)
10°
RETRACTED
-8 ft (-2.4 m)
36 ft 32 ft
12 ft (3.7 m)
0 ft
-5°
-4 ft (-1.2 m)
T E L E H A N D L E R
16 ft (4.9 m)
0°
0 ft (0 m)
LULL 644E
24 ft (7.3 m)
10°
4 ft (1.2 m)
-8 ft (-2.4 m)
40 ft 48 ft (14.6 m)
20°
16 ft (4.9 m)
-5°
-4 ft (-1.2 m)
4 ft
4,000 lb (1,814 kg)
8 ft (2.4 m)
8 ft
3,000 lb (1,361 kg)
10°
1,500 lb (680 kg)
12 ft (3.7 m)
12 ft
2,000 lb (907 kg)
16 ft (4.9 m)
2,000 lb (907 kg)
20°
3,000 lb (1,361 kg)
20 ft (6.1 m)
B
1,000 lb (454 kg)
24 ft (7.3 m)
C
6,000 lb (2,722 kg)
40°
28 ft (8.5 m)
16 ft
20 ft
(less forks) 253 in. (6.4366° m) 60° Width 98 in. (2.48 m) F 40 ft (12.2 m) Height 95.5 in. (2.43 m) E 50° 36 ft (11.0 m) Wheelbase 131 in. (3.32 m) D 16 in. (406 mm) 32 ft Ground (9.8 m) Clearance C Outside Turning Radius 40° 148 in. (3.75 m) 28 ft (8.5 m) Max. Reach from Front Tires B 24 ft to (7.324 m) in. (609 mm) 30° A Load Center 35.5 ft/29 ft (10.82 m/8.83 m)
F
50°
36 ft (11.0 m)
24 ft
44 ft (13.4 m) Length
66° 60°
28 ft
Dimensions
6,000 lb (2,722 kg)
8 ft
4,000 lb (1,814 kg)
12 ft
3,000 lb (1,361 kg)
16 ft
20 ft
2,000 lb (907 kg)
24 ft
1,500 lb (680 kg)
28 ft
300 lb (136 kg)
36 ft 32 ft 48 ft (14.6 m)
JLG Industries, Inc. 1 JLG Drive McConnellsburg, PA 17233-9533 Telephone 717-485-5161 Toll-free in US 877-JLG-LIFT Fax 717-485-6417 www.jlg.com An Oshkosh Corporation Company LULL 644E T E L E H A N D L E R
28 ft
24 ft
20 ft
16 ft
12 ft
8 ft
4 ft
0 ft
36 ft 32 ft 48 ft (14.6 m)
28 ft
24 ft
20 ft
16 ft
12 ft
8 ft
4 ft
0 ft
