Keurig K10 Mini Plus Cup Holder Replacement

Report 2 Downloads 79 Views
Keurig K10 Mini Plus Cup Holder Replacement

Keurig K10 Mini Plus Cup Holder Replacement Can be identified by Serial Number: 31.2000.2338851 Manufactured by Keurig

Written By: Mark Henein

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 3

Keurig K10 Mini Plus Cup Holder Replacement

INTRODUCTION In this guide we will show you how to successfully remove the K-cup holder.

TOOLS: iFixit Opening Tools (1) using the smallest opening tool available will work. Just needed to press down on tabs.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 3

Keurig K10 Mini Plus Cup Holder Replacement

Step 1 — Cup Holder



Press on tab while pulling up on K-cup until you hear a click. Repeat for the remaining tabs. We found using the smallest of the "plastic opening tools" worked wonders.

Step 2



Once all of the tabs have been pressed the K-Cup should just pop out. After you just pull the remaining of the K-Cup. You have successfully removed the K-Cup.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-08 07:29:03 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 3