Kyocera QCP-2035 Battery Replacement

Kyocera QCP-2035 Battery Replacement

Kyocera QCP-2035 Battery Replacement Replace the battery that is no longer holding a charge.

Written By: Scott Whitney

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Kyocera QCP-2035 Battery Replacement

INTRODUCTION This is a quick and simple replacement. There are no special tools needed.

PARTS: Kyocera QCP-2035 Battery 3.7v (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Kyocera QCP-2035 Battery Replacement

Step 1 — Removing Back Cover



When looking at the back of the phone, you will see a horizontal line and three raised segments of plastic in the form of a triangle.



Place thumb on top of the triangle and press into the phone while sliding your thumb towards the bottom of the phone.



In 5 mm it will stop sliding.

Step 2



Grab the bottom of the back cover with your other hand and pull the cover the rest of the way off.



Turn the phone over slowly. The battery will fall out on its own.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Kyocera QCP-2035 Battery Replacement

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-17 10:36:00 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4