L1 = Sip L2 = Puff L3 = Sip R1 = Sip R2 = Puff R3 = Sip Start = Soft Sip ...

QuadStick Quick Start Joystick Movement Modes: Left Analog

Mix L/R Analog 1

Right Analog

2

3

D-Pad 4

Mouse 5

Next Mode = Sip Previous = Puff

Selected Mode LEDs

L1 = Sip L2 = Puff Select = Soft Sip

L3 = Sip

(Mode number)

R1 = Sip R2 = Puff Start = Soft Sip Square = Sip Circle = Puff Home (PS3) = Soft Sip

X = Lip

R3 = Sip Triangle = Puff

●

●

Connect the QuadStick to the PS3 with the supplied USB cable. Allow a few seconds for the QuadStick to boot and when the flashing stops and the leftmost LED is dimly lit, it is ready.

●

●

●

Need help? Phone: 1-406-205-4044 Email: [email protected]

Position the mouthpiece almost touching the lips, so the user can comfortably reach out and get a good seal around the sip & puff tubes, but not so close that it interferes with speaking. Position the side tube so the corner of the mouth can reach it but not directly up against the side of the mouthpiece. A soft sip on the center tube actives the Home button. Sip gently until the tone sounds and hold that pressure until it beeps.