LA-2012-0520-B-1 - SA Geolab International Pte Ltd
SA Geolab International Pte Ltd 1 Angsana Drive Jurong Island Singapore 627585
Certificate No.
: LA-2012-0520-B-1
Issue No.
: 1
Date
: 06 January 2015
Page
: 1 of 2
FIELD OF TESTING : Civil Engineering
MATERIALS / PRODUCTS TESTED SOIL
TESTS / PROPERTIES
STANDARD METHOD / TECHNIQUES / EQUIPMENT USED
1.
Moisture Content
BS 1377 : Pt 2 #3 : 1990
2.
Density
BS 1377 : Pt 2 #7 : 1990
3.
Specific Gravity
ASTM D 854 – 2010
4
Liquid Limit Cone Penetrometer Test
BS 1377 : Pt 2 #4.3 : 1990
5.
Plastic Limit
BS 1377 : Pt 2 #5 : 1990
6.
Sieve Analysis
BS 1377 : Pt 2 #9.2 & #9.3 : 1990 BS 812 : 103 : 1985
7.
Silt Content
BS 812 : 103 : 1985
8.
Hydrometer Analysis
ASTM D 422 – 63 (Re-approved 2007)
9.
Unconsolidated Undrained BS 1377 : Pt 7 #8 & #9 : 1990 Triaxial
Certificate No. :
LA-2012-0520-B-1
Issue No. :
1
Date
06 January 2015
Page
2 of 2
:
MATERIALS / PRODUCTS TESTED
:
TEST S/ PROPERTIES
STANDARD METHODS / TECHNIQUES / EQUIPMENT USED
10. Consolidated Undrained Triaxial
BS 1377 : Pt 8 #7 : 1990
11. Consolidated Drained Triaxial
BS 1377 : Pt 8 #8 : 1990
12. Oedometer
BS 1377 : Pt 5 #3 : 1990
13. Compaction
BS 1377 : Pt 4 #3 : 1990
14. Direct Shear
BS 1377 : Pt 7 #4 : 1990
15. Determination of Maximum and Minimum Dry Densities for Granular Soils
BS 1377 : Pt 4 : 1990
16. One Dimensional Consolidation test using the controlled Strain loading
ASTM D4186/4186M-12
17. Rowe Cell
BS 1377 Pt 6 #3 1990
18. In-situ density test using Rubber Balloon Method
ASTM D2167-08
19. In-situ density test using Sand Replacement Method
BS 1377 : Pt 9 #2 : 1990
Approved Signatories Mr Syed Ahmad Mr Abu Bakar Bin Ismail Note : This laboratory is accredited in accordance with the recognised International Standard ISO/IEC 17025:2005. A laboratory's fulfilment of the requirements of ISO/IEC 17025:2005 means the laboratory meets both the technical competence requirements and management system requirements that are necessary for it to consistently deliver technically valid test results. The management system requirements in ISO/IEC 17025:2005 (Section 4) are written in language relevant to laboratory operations and meet the principles of ISO 9001:2008 Quality Management Systems — Requirements and are aligned with its pertinent requirements.
Certificate No.
: LA-2012-0520-B-1
Issue No.
: 1
Date
: 06 January 2015
Page
: 1 of 2
FIELD OF TESTING : Civil Engineering
MATERIALS / PRODUCTS TESTED SOIL
TESTS / PROPERTIES
STANDARD METHOD / TECHNIQUES / EQUIPMENT USED
1.
Moisture Content
BS 1377 : Pt 2 #3 : 1990
2.
Density
BS 1377 : Pt 2 #7 : 1990
3.
Specific Gravity
ASTM D 854 – 2010
4
Liquid Limit Cone Penetrometer Test
BS 1377 : Pt 2 #4.3 : 1990
5.
Plastic Limit
BS 1377 : Pt 2 #5 : 1990
6.
Sieve Analysis
BS 1377 : Pt 2 #9.2 & #9.3 : 1990 BS 812 : 103 : 1985
7.
Silt Content
BS 812 : 103 : 1985
8.
Hydrometer Analysis
ASTM D 422 – 63 (Re-approved 2007)
9.
Unconsolidated Undrained BS 1377 : Pt 7 #8 & #9 : 1990 Triaxial
Certificate No. :
LA-2012-0520-B-1
Issue No. :
1
Date
06 January 2015
Page
2 of 2
:
MATERIALS / PRODUCTS TESTED
:
TEST S/ PROPERTIES
STANDARD METHODS / TECHNIQUES / EQUIPMENT USED
10. Consolidated Undrained Triaxial
BS 1377 : Pt 8 #7 : 1990
11. Consolidated Drained Triaxial
BS 1377 : Pt 8 #8 : 1990
12. Oedometer
BS 1377 : Pt 5 #3 : 1990
13. Compaction
BS 1377 : Pt 4 #3 : 1990
14. Direct Shear
BS 1377 : Pt 7 #4 : 1990
15. Determination of Maximum and Minimum Dry Densities for Granular Soils
BS 1377 : Pt 4 : 1990
16. One Dimensional Consolidation test using the controlled Strain loading
ASTM D4186/4186M-12
17. Rowe Cell
BS 1377 Pt 6 #3 1990
18. In-situ density test using Rubber Balloon Method
ASTM D2167-08
19. In-situ density test using Sand Replacement Method
BS 1377 : Pt 9 #2 : 1990
Approved Signatories Mr Syed Ahmad Mr Abu Bakar Bin Ismail Note : This laboratory is accredited in accordance with the recognised International Standard ISO/IEC 17025:2005. A laboratory's fulfilment of the requirements of ISO/IEC 17025:2005 means the laboratory meets both the technical competence requirements and management system requirements that are necessary for it to consistently deliver technically valid test results. The management system requirements in ISO/IEC 17025:2005 (Section 4) are written in language relevant to laboratory operations and meet the principles of ISO 9001:2008 Quality Management Systems — Requirements and are aligned with its pertinent requirements.
