laurel heights - South Cypress
laurel heights
™
WITH REVEAL IMAGING™
laurel heights
™
A realistic interpretation of refined travertine, Laurel Heights ™ features floor, wall and mosaic combinations, all produced with Reveal Imaging ™ for exceptional compatibility. A softstructured surface detail provides both visual and tactile appeal, complemented by high variation for a more natural appearance. The color palette offers a fresh take on traditional neutrals: Elevated Beige, Gray Summit, Brown Pinnacle, and Charcoal Crest.
Photo features Gray Summit 12 x 24 in a brick pattern on the floor and 12 x 18 on the wall, with 2 x 4 brick-joint mosaics on the wall.
FLOOR TILE (PORCELAIN)
Elevated Beige LH96
Brown Pinnacle LH97
Gray Summit LH98
Charcoal Crest LH99
Brown Pinnacle LH97
Gray Summit LH98
Charcoal Crest LH99
Brown Pinnacle LH97
Gray Summit LH98
Charcoal Crest LH99
WALL TILE (CERAMIC)
Elevated Beige LH96
MOSAIC TILE (CERAMIC)
Elevated Beige LH96
S I Z E S , S H A D E VA R I AT I O N & P R I C I N G
24 x 24 Floor Tile (23-5/8" x 23-5/8") (60.0 cm x 60.0 cm)
12 x 24 Floor Tile (11-11/16" x 23-5/8") (29.7 cm x 60.0 cm)
18 x 18 Floor Tile (17-3/4" x 17-3/4") (45.2 cm x 45.2 cm)
12 x 12 Floor Tile (11-13/16" x 11-13/16") (30.0 cm x 30.0 cm)
12 x 18 Wall Tile (12" x 18") (30.5 cm x 45.8 cm)
2 x 4 Mosaic (Dot-mounted) (11-7/8" x 11-7/8" sheet) (30.2 cm x 30.2 cm sheet)
High (V3)
Tile Thickness: 5/16” Floor and Wall, 1/4” Mosaics Recommended Grout Joint: 3/16” Floor, 1/16” Wall, 1/8” Mosaics Relative Pricing: Medium
TRIM
Floor Bullnose P-43C9F 3 x 12
Wall Surface Bullnose S-43C9W 3 x 12
Wall Surface Bullnose Corner SN-4310 3x3
Floor bullnose trim is intended to coordinate with floor field tile in the normal 90-degree installation position.
Photo features Gray Summit 12 x 18 wall tile with 2 x 4 brick-joint mosaics on the wall.
C E R A M I C W A L L & M O S A I C A P P L I C AT I O N
PERFORMANCE CHARACTERISTICS Dynamic Moisture C.O.F. Wet Absorption
Breaking Strength
MOH’s
Chemical Resistance
Abrasion Resistance
INTERIOR Residential
Floor
≥ 0.42
< 0.5%
> 275 lbs.
8.0
Resistant
4
Floors/Patios: ▲ Covered & Uncovered
Wall
--
< 20.0%
100-230 lbs.
4.0-6.5
Resistant
--
Walls/ Backsplashes
Mosaic
≥ 0.42
< 3.0%
> 250 lbs.
8.0
Resistant
4
Countertops
A DCOF value of ≥ 0.42 is the new standard for tiles specified for commercial application in standard A137.1–2012, Section 9.6. It replaces the SCOF value of ≥0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest™, visit www. americanolean.com/dcof.
Light Commercial
EXTERIOR Commercial
Residential
Commercial
Pool Linings Pool Deckings ▲ Mosaic tile only; does not apply to wall field tile. Wall and mosaic tile suitable for exterior wall applications in non-freezing climates only when proper installation methods are followed.
NOTES Special Installation Requirement: For proper bonding, medium bed mortar should be utilized in installing tiles with a dimensional length size greater than 20 x 20, large rectangles or tiles with greater dimensional thickness than normal. Back buttering tiles of this nature in the installation process will also assure proper coverage for bonding.
PORCELAIN FLOOR
Since there is shade variation in all fired ceramic products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. For additional information, refer to “Factors to Consider” at http://americanolean.com/factors-toconsider.cfm.
INTERIOR Residential
Light Commercial
EXTERIOR Commercial
Residential
Commercial
Floors/Patios: Covered & Uncovered Walls/ Backsplashes Countertops
Cleaning Procedures • Remove loose dust and dirt with a damp cloth or sponge • Use a neutral, non-abrasive cleaner suitable for ceramic tile • Remove cleaning solution with a clean, damp sponge or mop Installation Methods Backing Materials • Concrete • Exterior grade plywood • Cementitious backer board
Setting • Standard thin-set • Epoxy Grouting • Unsanded grout (Wall) • Sanded grout (Floor) • Sanded cement grout (Floor) • Epoxy grout
Pool Linings Pool Deckings Floor tile suitable for exterior applications in freezing and non-freezing climates when proper installation methods are followed.
americanolean.com Naturally, many of our products can help you earn LEED™ credits. Visit aogreenworks.com for detailed information.
888.AOT.TILE ©2014 American Olean (4/14) SSAOLAURELHEIGHTS
™
WITH REVEAL IMAGING™
laurel heights
™
A realistic interpretation of refined travertine, Laurel Heights ™ features floor, wall and mosaic combinations, all produced with Reveal Imaging ™ for exceptional compatibility. A softstructured surface detail provides both visual and tactile appeal, complemented by high variation for a more natural appearance. The color palette offers a fresh take on traditional neutrals: Elevated Beige, Gray Summit, Brown Pinnacle, and Charcoal Crest.
Photo features Gray Summit 12 x 24 in a brick pattern on the floor and 12 x 18 on the wall, with 2 x 4 brick-joint mosaics on the wall.
FLOOR TILE (PORCELAIN)
Elevated Beige LH96
Brown Pinnacle LH97
Gray Summit LH98
Charcoal Crest LH99
Brown Pinnacle LH97
Gray Summit LH98
Charcoal Crest LH99
Brown Pinnacle LH97
Gray Summit LH98
Charcoal Crest LH99
WALL TILE (CERAMIC)
Elevated Beige LH96
MOSAIC TILE (CERAMIC)
Elevated Beige LH96
S I Z E S , S H A D E VA R I AT I O N & P R I C I N G
24 x 24 Floor Tile (23-5/8" x 23-5/8") (60.0 cm x 60.0 cm)
12 x 24 Floor Tile (11-11/16" x 23-5/8") (29.7 cm x 60.0 cm)
18 x 18 Floor Tile (17-3/4" x 17-3/4") (45.2 cm x 45.2 cm)
12 x 12 Floor Tile (11-13/16" x 11-13/16") (30.0 cm x 30.0 cm)
12 x 18 Wall Tile (12" x 18") (30.5 cm x 45.8 cm)
2 x 4 Mosaic (Dot-mounted) (11-7/8" x 11-7/8" sheet) (30.2 cm x 30.2 cm sheet)
High (V3)
Tile Thickness: 5/16” Floor and Wall, 1/4” Mosaics Recommended Grout Joint: 3/16” Floor, 1/16” Wall, 1/8” Mosaics Relative Pricing: Medium
TRIM
Floor Bullnose P-43C9F 3 x 12
Wall Surface Bullnose S-43C9W 3 x 12
Wall Surface Bullnose Corner SN-4310 3x3
Floor bullnose trim is intended to coordinate with floor field tile in the normal 90-degree installation position.
Photo features Gray Summit 12 x 18 wall tile with 2 x 4 brick-joint mosaics on the wall.
C E R A M I C W A L L & M O S A I C A P P L I C AT I O N
PERFORMANCE CHARACTERISTICS Dynamic Moisture C.O.F. Wet Absorption
Breaking Strength
MOH’s
Chemical Resistance
Abrasion Resistance
INTERIOR Residential
Floor
≥ 0.42
< 0.5%
> 275 lbs.
8.0
Resistant
4
Floors/Patios: ▲ Covered & Uncovered
Wall
--
< 20.0%
100-230 lbs.
4.0-6.5
Resistant
--
Walls/ Backsplashes
Mosaic
≥ 0.42
< 3.0%
> 250 lbs.
8.0
Resistant
4
Countertops
A DCOF value of ≥ 0.42 is the new standard for tiles specified for commercial application in standard A137.1–2012, Section 9.6. It replaces the SCOF value of ≥0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest™, visit www. americanolean.com/dcof.
Light Commercial
EXTERIOR Commercial
Residential
Commercial
Pool Linings Pool Deckings ▲ Mosaic tile only; does not apply to wall field tile. Wall and mosaic tile suitable for exterior wall applications in non-freezing climates only when proper installation methods are followed.
NOTES Special Installation Requirement: For proper bonding, medium bed mortar should be utilized in installing tiles with a dimensional length size greater than 20 x 20, large rectangles or tiles with greater dimensional thickness than normal. Back buttering tiles of this nature in the installation process will also assure proper coverage for bonding.
PORCELAIN FLOOR
Since there is shade variation in all fired ceramic products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. For additional information, refer to “Factors to Consider” at http://americanolean.com/factors-toconsider.cfm.
INTERIOR Residential
Light Commercial
EXTERIOR Commercial
Residential
Commercial
Floors/Patios: Covered & Uncovered Walls/ Backsplashes Countertops
Cleaning Procedures • Remove loose dust and dirt with a damp cloth or sponge • Use a neutral, non-abrasive cleaner suitable for ceramic tile • Remove cleaning solution with a clean, damp sponge or mop Installation Methods Backing Materials • Concrete • Exterior grade plywood • Cementitious backer board
Setting • Standard thin-set • Epoxy Grouting • Unsanded grout (Wall) • Sanded grout (Floor) • Sanded cement grout (Floor) • Epoxy grout
Pool Linings Pool Deckings Floor tile suitable for exterior applications in freezing and non-freezing climates when proper installation methods are followed.
americanolean.com Naturally, many of our products can help you earn LEED™ credits. Visit aogreenworks.com for detailed information.
888.AOT.TILE ©2014 American Olean (4/14) SSAOLAURELHEIGHTS
