LayIn NEMA Type 12 Wireway - Hoffman
Lay-In Wireway Lay-In NEMA Type 12 Wireway Cable and Wire Management Lay-In Wireway Lay-In NEMA Type 12 Wireway Spec-00321 H 763.422.2211 763.422.2600
Lay-In Wireway, NEMA Type 12
INDUSTRY STANDARDS
FEATURES • • • • • • •
UL 870 Listed; File No. E27524 NEMA/EEMAC Type 12 JIC standards EGP-1-1967 and EMP-1-1967 CSA, File No. 42184, Type 1 IEC 60529, IP54
APPLICATION
Used primarily in industrial applications to protect wiring against exposure to oil and other contaminants, this gasketed wireway features quick-release latches for easy access and an opening on one side so wires and cables can be laid in along the entire run without pulling. Available in multiple sizes, this wireway’s finish color and texture can be customized to meet application requirements.
eams continuously welded and ground smooth S No holes or knockouts Smooth, rounded edges on all sections and fittings Butt hinges and strong latches Quick-release cover latches Oil-resistant gasket and adhesive Gasketed quick-release sealing plate
SPECIFICATIONS • •
4 gauge steel covers and bodies 1 10 gauge steel end flanges
FINISH • • •
NSI 61 gray polyester powder finish inside and out over A pretreated surfaces Box connector is gray ANSI 61 L SGQR sealing plate and quick-release latches are plated
ACCESSORIES
Touch-Up Paint (ATPPY61)
1
Cable and Wire Management
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION SOLUTIONS Spec-00321 H
Lay-In Wireway Lay-In NEMA Type 12 Wireway
EQUIPMENT PROTECTION SOLUTIONS Spec-00321 H
PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM
Cable and Wire Management
2
Lay-In Wireway Lay-In NEMA Type 12 Wireway
Standard Product Selection Matrix Description 6.00-in. (152-mm) Straight Section 12.00-in. (305-mm) Straight Section 24.00-in. (610-mm) Straight Section 36.00-in. (914-mm) Straight Section 48.00-in. (1219-mm) Straight Section 60.00-in. (1524-mm) Straight Section 120.00-in. (3048-mm) Straight Section Cutoff Fitting, Lay-In Cutoff Fitting, Not Lay-In Telescope Fitting, Lay-In Cross Fitting 90° Elbow, top opening 90° Elbow, inside opening 90° Elbow, outside opening 90° Elbow, outside top opening 45° Elbow, top opening 45° Elbow, inside opening 45° Elbow, outside opening Tee Fitting, top opening Tee Fitting, outside top opening Junction Box Closure Plate Box Connector Reducer 4.00 x 4.00 to 2.50 x 2.50 (102 x 102) to (64 x 64) Reducer 6.00 x 6.00 to 4.00 x 4.00 (152 x 152) to (102 x 102 Reducer 8.00 x 8.00 to 6.00 x 6.00 (203 x 203) to (152 x 152) Reducer 12.00 x 6.00 to 6.00 x 6.00 (305 x 152) to (152 x 152) Reducer 12.00 x 6.00 to 4.00 x 4.00 (305 x 152) to (102 x 102) 1.00-in. (25-mm) Nipple 2.00-in. (51-mm) Nipple 3.00-in. (76-mm) Nipple Drop Hanger Bracket Hanger Clockwise Transposition Section Counterclockwise Transposition Section 90° Elbow, Clockwise Transposition 90° Elbow, Counterclockwise Transposition Barrier Kit, bolt-on Each barrier 60.00 in. (1524 mm) Barrier, bracket-mountedb Each barrier 60.00 in. (1524 mm)b Barrier Brackets, 2 compartmentb Barrier Brackets, 3 compartmentb Flat Sealing Platea 90° Angle Sealing Platea a
Sealing Platesa Type Flat Flat Flat Flat Flat Flat Flat Flat 90° Angle Special Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat 90° 90° None
Sealing Platesa Qty. 1 1 1 1 1 1 1 1 1 1 3 1 1 1 2 1 1 1 2 2 1 1 1 0
2.50 x 2.50 in. (64 x 64 mm) F22L06c,d F22L12c,d F22L24c,d F22L36c,d F22L48c,d F22L60c,d F22L120c,d F22LXL F22LX F22LA F22LCc,d F22LE9Ac,d F22LE9Bc,d F22LE9Cc,d — F22LE45Ac,d F22LE45Bc,d F22LE45Cc,d F22LTAc,d F22LTCc,d F22LJc,d F22LP F22LB —
4.00 x 4.00 in. (102 x 102 mm) F44L06c,d F44L12c,d F44L24c,d F44L36c,d F44L48c,d F44L60c,d F44L120c,d F44LXL F44LX F44LA F44LCc,d F44LE9Ac,d F44LE9Bc,d F44LE9Cc,d F44LE9ACc,d F44LE45Ac,d F44LE45Bc,d F44LE45Cc,d F44LTAc,d F44LTCc,d F44LJc,d F44LP F44LB F44LRE2
6.00 x 6.00 in. (152 x 152 mm) F66L06c,d F66L12c,d F66L24c,d F66L36c,d F66L48c,d F66L60c,d F66L120c,d F66LXL F66LX F66LA F66LCc,d F66LE9Ac,d F66LE9c,d F66LE9Cc,d F66LE9ACc,d F66LE45Ac,d F66LE45Bc,d F66LE45Cc,d F66LTAc,d F66LTCc,d F66LJc,d F66LP F66LB —
8.00 x 8.00 in. (203 x 203 mm) F88L06c,d F88L12c,d F88L24c,d F88L36c,d F88L48c,d F88L60c,d F88L120c,d F88LXL F88LX F88LA F88LCc,d F88LE9Ac,d F88LE9Bc,d F88LE9Cc,d F88LE9ACc,d F88LE45Ac,d F88LE45Bc,d F88LE45Cc,d F88LTAc,d F88LTCc,d F88LJc,d F88LP F88LB —
12.00 x 6.00 in. (305 x 152 mm) F126L06c,d F126L12c,d F126L24c,d F126L36c,d F126L48c,d F126L60c,d F126L120c,d F126LXL F126LX F126LA F126LCc,d F126LE9Ac,d F126LE9Bc,d F126LE9Cc,d — F126LE45Ac,d — — F126LTAc,d — — — — —
None
0
—
—
F66LRE44c,d
—
—
None
0
—
—
—
F88LRE66d
—
None
0
—
—
—
—
F126LRE66c,d
None
0
—
—
—
—
F126LRE44c,d
Special Special Special None None Flat Flat Flat Flat None
1 1 1 0 0 1 1 1 1 0
F22LN1c,d F22LN2c,d F22LN3c,d F22HD F22HB F22LKTc,d F22LKOKTc,d F22LE9KTc,d F22LE9KOKTc,d —
F44LN1c,d F44LN2c,d F44LN3c,d F44HD F44HB F44LKTc,d F44LKOKTc,d F44LE9KTc,d F44LE9KOKTc,d F44BK60
F66LN1c,d F66LN2c,d F66LN3c,d F66HD F66HB F66LKTc,d F66LKOKTc,d F66LE9KTc,d F66LE9KOKTc,d F66BK60
— — — F88HD F88HB — — F88LE9KTc,d F88LE9KOKTc,d F88BK60
— — — — — — — — — F66BK60
— — — — —
1 pkg. (5 pcs.) 1 pkg. (5 pcs.) 1 pkg. (5 pcs.) — —
— — — F22LSGQR F22LSAG
F44B360 F44BB2C F44BB3C F44LSGQR F44LSAG
F66B560 F66BB2C F66BB3C F66LSGQR F66LSAG
— — — F88LSGQR F88LSAG
— — — F126LSGQR F126LSAG
Each sealing plate also includes one gasket and one set of screws to join sections.
b
Package consists of five barriers or five brackets. Each barrier is 60-in. long.
c
Certified by Canadian Standards Association.
d
UL 870
3
Cable and Wire Management
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION SOLUTIONS Spec-00321 H
Lay-In Wireway Lay-In NEMA Type 12 Wireway
Straight Section Available in lengths from 6.00 in. (152 mm) to 120.00 in. (3048 mm). Bulletin: F10
Straight Sections Catalog Number F22L06 F22L12 F22L24 F22L36 F22L48 F22L60 F22L120 F44L06 F44L12 F44L24 F44L36 F44L48 F44L60 F44L120 F66L06 F66L12 F66L24 F66L36 F66L48 F66L60 F66L120 F88L06 F88L12 F88L24 F88L36 F88L48 F88L60 F88L120 F126L06 F126L12 F126L24 F126L36 F126L48 F126L60 F126L120
AxBxC in. 2.50 x 2.50 x 6.00 2.50 x 2.50 x 12.00 2.50 x 2.50 x 24.00 2.50 x 2.50 x 36.00 2.50 x 2.50 x 48.00 2.50 x 2.50 x 60.00 2.50 x 2.50 x 120.00 4.00 x 4.00 x 6.00 4.00 x 4.00 x 12.00 4.00 x 4.00 x 24.00 4.00 x 4.00 x 36.00 4.00 x 4.00 x 48.00 4.00 x 4.00 x 60.00 4.00 x 4.00 x 120.00 6.00 x 6.00 x 6.00 6.00 x 6.00 x 12.00 6.00 x 6.00 x 24.00 6.00 x 6.00 x 36.00 6.00 x 6.00 x 48.00 6.00 x 6.00 x 60.00 6.00 x 6.00 x 120.00 8.00 x 8.00 x 6.00 8.00 x 8.00 x 12.00 8.00 x 8.00 x 24.00 8.00 x 8.00 x 36.00 8.00 x 8.00 x 48.00 8.00 x 8.00 x 60.00 8.00 x 8.00 x 120.00 12.00 x 6.00 x 6.00 12.00 x 6.00 x 12.00 12.00 x 6.00 x 24.00 12.00 x 6.00 x 36.00 12.00 x 6.00 x 48.00 12.00 x 6.00 x 60.00 12.00 x 6.00 x 120.00
AxBxC mm 64 x 64 x 152 64 x 64 x 305 64 x 64 x 610 64 x 64 x 914 64 x 64 x 1219 64 x 64 x 1524 64 x 64 x 3048 102 x 102 x 152 102 x 102 x 305 102 x 102 x 610 102 x 102 x 914 102 x 102 x 1219 102 x 102 x 1524 102 x 102 x 3048 152 x 152 x 152 152 x 152 x 305 152 x 152 x 610 152 x 152 x 914 152 x 152 x 1219 152 x 152 x 1524 152 x 152 x 3048 203 x 203 x 152 203 x 203 x 305 203 x 203 x 610 203 x 203 x 914 203 x 203 x 1219 203 x 203 x 1524 203 x 203 x 3048 305 x 152 x 152 305 x 152 x 305 305 x 152 x 610 305 x 152 x 914 305 x 152 x 1219 305 x 152 x 1524 305 x 152 x 3048
Sealing Plates, Typea Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat
Sealing Plates, Qty.a 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
D (in.) 3.88 3.88 3.88 3.88 3.88 3.88 3.88 5.38 5.38 5.38 5.38 5.38 5.38 5.38 7.62 7.62 7.62 7.62 7.62 7.62 7.62 9.62 9.62 9.62 9.62 9.62 9.62 9.62 13.62 13.62 13.62 13.62 13.62 13.62 13.62
D (mm) 99 99 99 99 99 99 99 137 137 137 137 137 137 137 194 194 194 194 194 194 194 244 244 244 244 244 244 244 346 346 346 346 346 346 346
E (in.) 3.88 3.88 3.88 3.88 3.88 3.88 3.88 5.38 5.38 5.38 5.38 5.38 5.38 5.38 7.62 7.62 7.62 7.62 7.62 7.62 7.62 9.62 9.62 9.62 9.62 9.62 9.62 9.62 7.62 7.62 7.62 7.62 7.62 7.62 7.62
E (mm) 99 99 99 99 99 99 99 137 137 137 137 137 137 137 194 194 194 194 194 194 194 244 244 244 244 244 244 244 194 194 194 194 194 194 194
a
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association.
EQUIPMENT PROTECTION SOLUTIONS Spec-00321 H
PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM
Cable and Wire Management
4
Lay-In Wireway Lay-In NEMA Type 12 Wireway
Cut-Off Fitting, Lay-In For lengths of 9.00 in. (229 mm) to 15.00 in. (381 mm) only. Body comes in two pieces. Shorten body and cover to the desired length and weld together. Bulletin: F10 Catalog Number F22LXL F44LXL F66LXL F88LXL F126LXL a
AxB in. 2.50 x 2.50 4.00 x 4.00 6.00 x 6.00 8.00 x 8.00 12.00 x 6.00
Sealing Plates, Typea Flat Flat Flat Flat Flat
AxB mm 64 x 64 102 x 102 152 x 152 203 x 203 305 x 152
Sealing Plates, Qty.a 1 1 1 1 1
Each sealing plate also includes one gasket and one set of screws to join sections.
Cut-Off Fitting, Non-Lay-In For lengths up to 12.00 in. (305 mm). Shorten body to desired length and weld on flange. This is not a “lay-in” fitting but often is used when entering an enclosure. Bulletin: F10 Catalog Number F22LX F44LX F66LX F88LX F126LX a
AxB in. 2.50 x 2.50 4.00 x 4.00 6.00 x 6.00 8.00 x 8.00 12.00 x 6.00
Sealing Plates, Typea 90° Angle 90° Angle 90° Angle 90° Angle 90° Angle
AxB mm 64 x 64 102 x 102 152 x 152 203 x 203 305 x 152
Sealing Plates, Qty.a 1 1 1 1 1
Each sealing plate also includes one gasket and one set of screws to join sections.
Telescope Fitting, Lay-In Length is easily adjustable from 1.00 in. (25 mm) to 7.00 in. (178 mm). No cutting or welding required. Bulletin: F10 Catalog Number F22LA F44LA F66LA F88LA F126LA a
AxB in. 2.50 x 2.50 4.00 x 4.00 6.00 x 6.00 8.00 x 8.00 12.00 x 6.00
Sealing Plates Typea Special Special Special Special Special
AxB mm 64 x 64 102 x 102 152 x 152 203 x 203 305 x 152
Sealing Plates Qty.a 1 1 1 1 1
Each sealing plate also includes one gasket and one set of screws to join sections
Cross Fitting Used when there are four branches, all open along the same side. Bulletin: F10 Catalog Number F22LC F44LC F66LC F88LC F126LC a
AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 12.00 x 6.00 305 x 152
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 3
Flat
3
Flat
3
Flat
3
Flat
3
G in./mm 8.50 216 10.00 254 12.00 305 14.00 356 18.00 457
K in./mm 4.25 108 5.00 127 6.00 152 7.00 178 9.00 229
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association
5
Cable and Wire Management
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION SOLUTIONS Spec-00321 H
Lay-In Wireway Lay-In NEMA Type 12 Wireway
90-Degree Elbow—Outside Top Opening This elbow fitting allows a vertical drop to equipment below at a 90-degree corner while maintaining the top opening lay-in feature. Bulletin: F10
AxB in./mm 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203
Catalog Number F44LE9AC F66LE9AC F88LE9AC
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 2
Flat
2
Flat
2
H in./mm 5.00 127 6.00 152 7.00 178
a
Each sealing plate also includes one gasket and one set of screws to join sections.
90-Degree Elbows
Inside Opening
Because sections of lay-in wireway can be mounted with covers oriented in any direction, three different 90-degree elbows are available. Proper selection allows the user to maintain the same access and thereby preserve the lay-in feature for right-angle installations. Bulletin: F10
F44LE9A F66LE9A F88LE9A F126LE9A
F44LE9B F66LE9B
Top Opening Catalog Number F22LE9A
Catalog Number F22LE9B
AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 12.00 x 6.00 305 x 152
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 1
Flat
1
Flat
1
Flat
1
Flat
1
F88LE9B K in./mm 4.25 108 5.00 127 6.00 152 7.00 178 9.00 229
F126LE9B
AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 12.00 x 6.00 305 x 152
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 1
Flat
1
Flat
1
Flat
1
Flat
1
H in./mm 4.25 108 5.00 127 6.00 152 7.00 178 6.00 152
a
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association.
a
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association.
Outside Opening Catalog Number F22LE9C F44LE9C F66LE9C F88LE9C F126LE9C
AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 12.00 x 6.00 305 x 152
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 1
Flat
1
Flat
1
Flat
1
Flat
1
H in./mm 4.25 108 5.00 127 6.00 152 7.00 178 6.00 152
a
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association.
EQUIPMENT PROTECTION SOLUTIONS Spec-00321 H
PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM
Cable and Wire Management
6
Lay-In Wireway Lay-In NEMA Type 12 Wireway
45-Degree Elbows
Inside Opening
Because sections of lay-in wireway can be mounted with covers oriented in any direction, three different 45-degree elbows are available. Proper selection allows the user to maintain the same access and thereby preserve the lay-in feature for right-angle installations. Bulletin: F10
F44LE45A F66LE45A F88LE45A F126LE45A a
F44LE45B F66LE45B
Top Opening Catalog Number F22LE45A
Catalog Number F22LE45B
AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 12.00 x 6.00 305 x 152
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 1
Flat
1
Flat
1
Flat
1
Flat
1
F88LE45B J in./mm 2.00 51 2.44 62 3.00 76 3.75 95 4.75 121
AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 1
Flat
1
Flat
1
Flat
1
J in./mm 2.00 51 2.44 62 3.00 76 3.75 95
a
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association.
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association
Outside Opening Catalog Number F22LE45C F44LE45C F66LE45C F88LE45C
AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 1
Flat
1
Flat
1
Flat
1
J in./mm 2.00 51 2.44 62 3.00 76 3.75 95
a
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association
7
Cable and Wire Management
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION SOLUTIONS Spec-00321 H
Lay-In Wireway Lay-In NEMA Type 12 Wireway
Tee Fitting—Top Opening This fitting is used when the covers of all three branches of the wireway run are open along the same side. Bulletin: F10 AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 12.00 x 6.00 305 x 152
Catalog Number F22LTA F44LTA F66LTA F88LTA F126LTA
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 2
Flat
2
Flat
2
Flat
2
Flat
2
G in./mm 8.50 216 10.00 254 12.00 305 14.00 356 18.00 457
K in./mm 4.25 108 5.00 127 6.00 152 7.00 178 9.00 229
a
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association.
Tee Fitting—Outside Top Opening This fitting is used when the covers of two branches are on the same side and the third is on a different side. Bulletin: F10 AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203
Catalog Number F22LTC F44LTC F66LTC F88LTC
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 2
Flat
2
Flat
2
Flat
2
G in./mm 8.50 216 10.00 254 12.00 305 14.00 356
K in./mm 4.25 108 5.00 127 6.00 152 7.00 178
a
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association.
Junction Box The junction box has a removable panel on which terminal blocks and other components may be mounted. Bulletin: F10 Catalog Number F22LJ F44LJ F66LJ F88LJ
AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203
Sealing Plates, Type Flat
Sealing Plates, Qty.a 1
Flat
1
Flat
1
Flat
1
M in./mm 12.00 305 14.00 356 16.00 406 18.00 457
N in./mm 10.25 260 13.88 353 17.88 454 21.88 556
Removable Panel Size in./mm 8.75 x 6.88 222 x 175 10.75 x 8.88 273 x 225 12.75 x 10.88 324 x 276 14.75 x 12.88 375 x 327
a
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association.
EQUIPMENT PROTECTION SOLUTIONS Spec-00321 H
PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM
Cable and Wire Management
8
Lay-In Wireway Lay-In NEMA Type 12 Wireway
Closure Plate Used to seal the end of a wireway section or run. Bulletin: F10 Catalog Number F22LP
Sealing Plates, Typea 90°
Sealing Plates, Qty.a 1
F44LP
90°
1
F66LP
90°
1
F88LP
90°
1
F126LP
90°
1
a
D in./mm 3.88 99 5.38 137 7.62 194 9.62 244 13.62 346
E in./mm 3.88 99 5.38 137 7.62 194 9.62 244 7.62 194
Each sealing plate also includes one gasket and one set of screws to join sections.
Reducer This fitting permits the lay-in feature to be retained when reducing to a smaller wireway size. Bulletin: F10 Catalog Number F44LRE22
Sealing Plates, Type None
Sealing Plates, Qty. 0
F66LRE44
None
0
F88LRE66
None
0
F126LRE66
None
0
F126LRE44
None
0
From A x B in./mm 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 12.00 x 6.00 305 x 152 12.00 x 6.00 305 x 152
To A x B in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 6.00 x 6.00 152 x 152 4.00 x 4.00 102 x 102
Certified by Canadian Standards Association.
Nipple Available in lengths of 1.00 in. (25 mm), 2.00 in. (51 mm) and 3.00 in. (76 mm). Bulletin: F10 Catalog Number F22LN1 F22LN2 F22LN3 F44LN1 F44LN2 F44LN3 F66LN1 F66LN2 F66LN3 a
AxBxC in./mm 2.50 x 2.50 x 1.00 64 x 64 x 25 2.50 x 2.50 x 2.00 64 x 64 x 51 2.50 x 2.50 x 3.00 64 x 64 x 76 4.00 x 4.00 x 1.00 102 x 102 x 25 4.00 x 4.00 x 2.00 102 x 102 x 51 4.00 x 4.00 x 3.00 102 x 102 x 76 6.00 x 6.00 x 1.00 152 x 152 x 25 6.00 x 6.00 x 2.00 152 x 152 x 51 6.00 x 6.00 x 3.00 152 x 152 x 76
Sealing Plates, Typea Special
Sealing Plates, Qty.a 1
Special
1
Special
1
Special
1
Special
1
Special
1
Special
1
Special
1
Special
1
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association.
9
Cable and Wire Management
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION SOLUTIONS Spec-00321 H
Lay-In Wireway Lay-In NEMA Type 12 Wireway
Drop Hanger Hangers are used to support a wireway run. The drop hanger is normally attached to an overhead beam or ceiling. Bulletin: F20 Catalog Number F22HD
Sealing Plates, Typea None
Sealing Plates, Qty.a 0
F44HD
None
0
F66HD
None
0
F88HD
None
0
S in./mm 9.25 235 11.75 298 15.25 387 20.56 522
T in./mm 4.50 114 6.00 152 8.12 206 12.12 308
a
Each sealing plate also includes one gasket and one set of screws to join sections.
Bracket Hanger Hangers are used to support a wireway run. The bracket hanger can be used for wall, floor or ceiling installations. Bulletin: F20 P in./mm 4.62 117 6.12 155 8.25 210 10.25 260
Catalog Number F22HB F44HB F66HB F88HB
R in./mm 3.62 92 3.62 92 3.62 92 3.62 92
U in./mm 4.38 111 5.88 149 7.88 200 11.25 286
Box Connector When wireway enters an enclosure, a box connector should be used on the inside of the enclosure to ensure a tight seal. Bulletin: F10 Catalog Number F22LB
Sealing Plates, Typea 90°
Sealing Plates, Qty.a 1
F44LB
90°
1
F66LB
90°
1
F88LB
90°
1
F126LB
90°
1
D in./mm 3.88 99 5.38 137 7.62 194 9.62 244 13.62 346
E in./mm 3.88 99 5.38 137 7.62 194 9.62 244 7.62 194
a
Each sealing plate also includes one gasket and one set of screws to join sections.
EQUIPMENT PROTECTION SOLUTIONS Spec-00321 H
PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM
Cable and Wire Management
10
Lay-In Wireway Lay-In NEMA Type 12 Wireway
Transposition Sections
90-Degree Elbow—Clockwise
These fittings are used when it is necessary to rotate the open side of the wireway run by 90 degrees and still retain the lay-in feature. Bulletin: F10
F44LE9KT
Clockwise AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152
Catalog Number F22LKT F44LKT F66LKT a
Catalog Number F22LE9KT
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 1
Flat
1
Flat
1
F66LE9KT F88LE9KT
AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 1
Flat
1
Flat
1
Flat
1
H in./mm 2.45 108 5.00 127 6.00 452 7.00 178
a
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association.
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association.
90-Degree Elbow—Counterclockwise Catalog Number F22LE9KOKT
Counterclockwise Catalog Number F22LKOKT F44LKOKT F66LKOKT a
AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 1
Flat
1
Flat
1
F44LE9KOKT F66LE9KOKT F88LE9KOKT
AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 1
Flat
1
Flat
1
Flat
1
H in./mm 4.25 108 5.00 127 6.00 152 7.00
a
Each sealing plate also includes one gasket and one set of screws to join sections.
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association.
Certified by Canadian Standards Association.
Barrier Kits, Bracket-Mounted Spring steel brackets hold barriers in place by friction fit inside wireway. Order barrier and bracket separately. Recommended spacing in increments of 3 ft. (.9 m). Bulletin: F10
Two or Three Compartment Catalog Number F44B360 F66B560 a
Sealing Plates (qty.)a 1 pkg.a (5 pcs.) 1 pkg.a (5 pcs.)
W (in.) 3.00 4.50
W (mm) 76 114
Package consists of five barriers or five brackets. Each barrier is 60 inches long.
Two Compartment Catalog Number F44BB2C F66BB2C
Sealing Plates (qty.)a 1 pkg. 1 pkg.
W (in.) 3.00 4.50
W (mm) 76 114
a
Package consists of five barriers or five brackets. Each barrier is 60 inches long.
Three Compartment Catalog Number F44BB3C F66BB3C
Sealing Plates (qty.)a 1 pkg. 1 pkg.
W (in.) 3.00 4.50
W (mm) 76 114
a
Package consists of five barriers or five brackets. Each barrier is 60 inches long.
11
Cable and Wire Management
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION SOLUTIONS Spec-00321 H
Lay-In Wireway Lay-In NEMA Type 12 Wireway
Barrier Kit, Bolt-On Divides wireway into two or more compartments. Barriers are fastened to wireway sections with screws. Sealing washers are included. Bulletin: F20 Catalog Number F33BK60 F44BK60 F66BK60 F88BK60
W in./mm 2.00 51 3.00 76 4.50 114 6.00 152
AxB in./mm 3.00 x 3.00 76 x 76 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203
90-Degree Angle Sealing Plate When joining a lay-in section or fitting to a closure plate, a box connector, a non-lay-in cut-off fitting or any similar non-lay-in section or fitting, a F____LSAG 90-degree angle sealing plate is required at each junction. Hoffman furnishes this plate with fittings. Additional 90-degree angle sealing plates may be required in some cases. Plate includes a flange gasket and flange screws, not shown in drawing. Bulletin: F10 Catalog Number F22LSAG F44LSAG F66LSAG F88LSAG F126LSAG
AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 12.00 x 6.00 305 x 152
Each sealing plate also includes one gasket and one set of screws to join sections.
Quick-Release Flat Sealing Plate This exclusive Hoffman-designed hinged sealing plate permits quick and easy access to the wireway interior without using a tool. Bulletin: F10
Catalog Number F22LSGQR F44LSGQR F66LSGQR F88LSGQR F126LSGQR
AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 12.00 x 6.00 305 x 152
Each sealing plate also includes one gasket and one set of screws to join sections.
EQUIPMENT PROTECTION SOLUTIONS Spec-00321 H
PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM
Cable and Wire Management
12
Lay-In Wireway, NEMA Type 12
INDUSTRY STANDARDS
FEATURES • • • • • • •
UL 870 Listed; File No. E27524 NEMA/EEMAC Type 12 JIC standards EGP-1-1967 and EMP-1-1967 CSA, File No. 42184, Type 1 IEC 60529, IP54
APPLICATION
Used primarily in industrial applications to protect wiring against exposure to oil and other contaminants, this gasketed wireway features quick-release latches for easy access and an opening on one side so wires and cables can be laid in along the entire run without pulling. Available in multiple sizes, this wireway’s finish color and texture can be customized to meet application requirements.
eams continuously welded and ground smooth S No holes or knockouts Smooth, rounded edges on all sections and fittings Butt hinges and strong latches Quick-release cover latches Oil-resistant gasket and adhesive Gasketed quick-release sealing plate
SPECIFICATIONS • •
4 gauge steel covers and bodies 1 10 gauge steel end flanges
FINISH • • •
NSI 61 gray polyester powder finish inside and out over A pretreated surfaces Box connector is gray ANSI 61 L SGQR sealing plate and quick-release latches are plated
ACCESSORIES
Touch-Up Paint (ATPPY61)
1
Cable and Wire Management
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION SOLUTIONS Spec-00321 H
Lay-In Wireway Lay-In NEMA Type 12 Wireway
EQUIPMENT PROTECTION SOLUTIONS Spec-00321 H
PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM
Cable and Wire Management
2
Lay-In Wireway Lay-In NEMA Type 12 Wireway
Standard Product Selection Matrix Description 6.00-in. (152-mm) Straight Section 12.00-in. (305-mm) Straight Section 24.00-in. (610-mm) Straight Section 36.00-in. (914-mm) Straight Section 48.00-in. (1219-mm) Straight Section 60.00-in. (1524-mm) Straight Section 120.00-in. (3048-mm) Straight Section Cutoff Fitting, Lay-In Cutoff Fitting, Not Lay-In Telescope Fitting, Lay-In Cross Fitting 90° Elbow, top opening 90° Elbow, inside opening 90° Elbow, outside opening 90° Elbow, outside top opening 45° Elbow, top opening 45° Elbow, inside opening 45° Elbow, outside opening Tee Fitting, top opening Tee Fitting, outside top opening Junction Box Closure Plate Box Connector Reducer 4.00 x 4.00 to 2.50 x 2.50 (102 x 102) to (64 x 64) Reducer 6.00 x 6.00 to 4.00 x 4.00 (152 x 152) to (102 x 102 Reducer 8.00 x 8.00 to 6.00 x 6.00 (203 x 203) to (152 x 152) Reducer 12.00 x 6.00 to 6.00 x 6.00 (305 x 152) to (152 x 152) Reducer 12.00 x 6.00 to 4.00 x 4.00 (305 x 152) to (102 x 102) 1.00-in. (25-mm) Nipple 2.00-in. (51-mm) Nipple 3.00-in. (76-mm) Nipple Drop Hanger Bracket Hanger Clockwise Transposition Section Counterclockwise Transposition Section 90° Elbow, Clockwise Transposition 90° Elbow, Counterclockwise Transposition Barrier Kit, bolt-on Each barrier 60.00 in. (1524 mm) Barrier, bracket-mountedb Each barrier 60.00 in. (1524 mm)b Barrier Brackets, 2 compartmentb Barrier Brackets, 3 compartmentb Flat Sealing Platea 90° Angle Sealing Platea a
Sealing Platesa Type Flat Flat Flat Flat Flat Flat Flat Flat 90° Angle Special Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat 90° 90° None
Sealing Platesa Qty. 1 1 1 1 1 1 1 1 1 1 3 1 1 1 2 1 1 1 2 2 1 1 1 0
2.50 x 2.50 in. (64 x 64 mm) F22L06c,d F22L12c,d F22L24c,d F22L36c,d F22L48c,d F22L60c,d F22L120c,d F22LXL F22LX F22LA F22LCc,d F22LE9Ac,d F22LE9Bc,d F22LE9Cc,d — F22LE45Ac,d F22LE45Bc,d F22LE45Cc,d F22LTAc,d F22LTCc,d F22LJc,d F22LP F22LB —
4.00 x 4.00 in. (102 x 102 mm) F44L06c,d F44L12c,d F44L24c,d F44L36c,d F44L48c,d F44L60c,d F44L120c,d F44LXL F44LX F44LA F44LCc,d F44LE9Ac,d F44LE9Bc,d F44LE9Cc,d F44LE9ACc,d F44LE45Ac,d F44LE45Bc,d F44LE45Cc,d F44LTAc,d F44LTCc,d F44LJc,d F44LP F44LB F44LRE2
6.00 x 6.00 in. (152 x 152 mm) F66L06c,d F66L12c,d F66L24c,d F66L36c,d F66L48c,d F66L60c,d F66L120c,d F66LXL F66LX F66LA F66LCc,d F66LE9Ac,d F66LE9c,d F66LE9Cc,d F66LE9ACc,d F66LE45Ac,d F66LE45Bc,d F66LE45Cc,d F66LTAc,d F66LTCc,d F66LJc,d F66LP F66LB —
8.00 x 8.00 in. (203 x 203 mm) F88L06c,d F88L12c,d F88L24c,d F88L36c,d F88L48c,d F88L60c,d F88L120c,d F88LXL F88LX F88LA F88LCc,d F88LE9Ac,d F88LE9Bc,d F88LE9Cc,d F88LE9ACc,d F88LE45Ac,d F88LE45Bc,d F88LE45Cc,d F88LTAc,d F88LTCc,d F88LJc,d F88LP F88LB —
12.00 x 6.00 in. (305 x 152 mm) F126L06c,d F126L12c,d F126L24c,d F126L36c,d F126L48c,d F126L60c,d F126L120c,d F126LXL F126LX F126LA F126LCc,d F126LE9Ac,d F126LE9Bc,d F126LE9Cc,d — F126LE45Ac,d — — F126LTAc,d — — — — —
None
0
—
—
F66LRE44c,d
—
—
None
0
—
—
—
F88LRE66d
—
None
0
—
—
—
—
F126LRE66c,d
None
0
—
—
—
—
F126LRE44c,d
Special Special Special None None Flat Flat Flat Flat None
1 1 1 0 0 1 1 1 1 0
F22LN1c,d F22LN2c,d F22LN3c,d F22HD F22HB F22LKTc,d F22LKOKTc,d F22LE9KTc,d F22LE9KOKTc,d —
F44LN1c,d F44LN2c,d F44LN3c,d F44HD F44HB F44LKTc,d F44LKOKTc,d F44LE9KTc,d F44LE9KOKTc,d F44BK60
F66LN1c,d F66LN2c,d F66LN3c,d F66HD F66HB F66LKTc,d F66LKOKTc,d F66LE9KTc,d F66LE9KOKTc,d F66BK60
— — — F88HD F88HB — — F88LE9KTc,d F88LE9KOKTc,d F88BK60
— — — — — — — — — F66BK60
— — — — —
1 pkg. (5 pcs.) 1 pkg. (5 pcs.) 1 pkg. (5 pcs.) — —
— — — F22LSGQR F22LSAG
F44B360 F44BB2C F44BB3C F44LSGQR F44LSAG
F66B560 F66BB2C F66BB3C F66LSGQR F66LSAG
— — — F88LSGQR F88LSAG
— — — F126LSGQR F126LSAG
Each sealing plate also includes one gasket and one set of screws to join sections.
b
Package consists of five barriers or five brackets. Each barrier is 60-in. long.
c
Certified by Canadian Standards Association.
d
UL 870
3
Cable and Wire Management
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION SOLUTIONS Spec-00321 H
Lay-In Wireway Lay-In NEMA Type 12 Wireway
Straight Section Available in lengths from 6.00 in. (152 mm) to 120.00 in. (3048 mm). Bulletin: F10
Straight Sections Catalog Number F22L06 F22L12 F22L24 F22L36 F22L48 F22L60 F22L120 F44L06 F44L12 F44L24 F44L36 F44L48 F44L60 F44L120 F66L06 F66L12 F66L24 F66L36 F66L48 F66L60 F66L120 F88L06 F88L12 F88L24 F88L36 F88L48 F88L60 F88L120 F126L06 F126L12 F126L24 F126L36 F126L48 F126L60 F126L120
AxBxC in. 2.50 x 2.50 x 6.00 2.50 x 2.50 x 12.00 2.50 x 2.50 x 24.00 2.50 x 2.50 x 36.00 2.50 x 2.50 x 48.00 2.50 x 2.50 x 60.00 2.50 x 2.50 x 120.00 4.00 x 4.00 x 6.00 4.00 x 4.00 x 12.00 4.00 x 4.00 x 24.00 4.00 x 4.00 x 36.00 4.00 x 4.00 x 48.00 4.00 x 4.00 x 60.00 4.00 x 4.00 x 120.00 6.00 x 6.00 x 6.00 6.00 x 6.00 x 12.00 6.00 x 6.00 x 24.00 6.00 x 6.00 x 36.00 6.00 x 6.00 x 48.00 6.00 x 6.00 x 60.00 6.00 x 6.00 x 120.00 8.00 x 8.00 x 6.00 8.00 x 8.00 x 12.00 8.00 x 8.00 x 24.00 8.00 x 8.00 x 36.00 8.00 x 8.00 x 48.00 8.00 x 8.00 x 60.00 8.00 x 8.00 x 120.00 12.00 x 6.00 x 6.00 12.00 x 6.00 x 12.00 12.00 x 6.00 x 24.00 12.00 x 6.00 x 36.00 12.00 x 6.00 x 48.00 12.00 x 6.00 x 60.00 12.00 x 6.00 x 120.00
AxBxC mm 64 x 64 x 152 64 x 64 x 305 64 x 64 x 610 64 x 64 x 914 64 x 64 x 1219 64 x 64 x 1524 64 x 64 x 3048 102 x 102 x 152 102 x 102 x 305 102 x 102 x 610 102 x 102 x 914 102 x 102 x 1219 102 x 102 x 1524 102 x 102 x 3048 152 x 152 x 152 152 x 152 x 305 152 x 152 x 610 152 x 152 x 914 152 x 152 x 1219 152 x 152 x 1524 152 x 152 x 3048 203 x 203 x 152 203 x 203 x 305 203 x 203 x 610 203 x 203 x 914 203 x 203 x 1219 203 x 203 x 1524 203 x 203 x 3048 305 x 152 x 152 305 x 152 x 305 305 x 152 x 610 305 x 152 x 914 305 x 152 x 1219 305 x 152 x 1524 305 x 152 x 3048
Sealing Plates, Typea Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat Flat
Sealing Plates, Qty.a 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
D (in.) 3.88 3.88 3.88 3.88 3.88 3.88 3.88 5.38 5.38 5.38 5.38 5.38 5.38 5.38 7.62 7.62 7.62 7.62 7.62 7.62 7.62 9.62 9.62 9.62 9.62 9.62 9.62 9.62 13.62 13.62 13.62 13.62 13.62 13.62 13.62
D (mm) 99 99 99 99 99 99 99 137 137 137 137 137 137 137 194 194 194 194 194 194 194 244 244 244 244 244 244 244 346 346 346 346 346 346 346
E (in.) 3.88 3.88 3.88 3.88 3.88 3.88 3.88 5.38 5.38 5.38 5.38 5.38 5.38 5.38 7.62 7.62 7.62 7.62 7.62 7.62 7.62 9.62 9.62 9.62 9.62 9.62 9.62 9.62 7.62 7.62 7.62 7.62 7.62 7.62 7.62
E (mm) 99 99 99 99 99 99 99 137 137 137 137 137 137 137 194 194 194 194 194 194 194 244 244 244 244 244 244 244 194 194 194 194 194 194 194
a
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association.
EQUIPMENT PROTECTION SOLUTIONS Spec-00321 H
PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM
Cable and Wire Management
4
Lay-In Wireway Lay-In NEMA Type 12 Wireway
Cut-Off Fitting, Lay-In For lengths of 9.00 in. (229 mm) to 15.00 in. (381 mm) only. Body comes in two pieces. Shorten body and cover to the desired length and weld together. Bulletin: F10 Catalog Number F22LXL F44LXL F66LXL F88LXL F126LXL a
AxB in. 2.50 x 2.50 4.00 x 4.00 6.00 x 6.00 8.00 x 8.00 12.00 x 6.00
Sealing Plates, Typea Flat Flat Flat Flat Flat
AxB mm 64 x 64 102 x 102 152 x 152 203 x 203 305 x 152
Sealing Plates, Qty.a 1 1 1 1 1
Each sealing plate also includes one gasket and one set of screws to join sections.
Cut-Off Fitting, Non-Lay-In For lengths up to 12.00 in. (305 mm). Shorten body to desired length and weld on flange. This is not a “lay-in” fitting but often is used when entering an enclosure. Bulletin: F10 Catalog Number F22LX F44LX F66LX F88LX F126LX a
AxB in. 2.50 x 2.50 4.00 x 4.00 6.00 x 6.00 8.00 x 8.00 12.00 x 6.00
Sealing Plates, Typea 90° Angle 90° Angle 90° Angle 90° Angle 90° Angle
AxB mm 64 x 64 102 x 102 152 x 152 203 x 203 305 x 152
Sealing Plates, Qty.a 1 1 1 1 1
Each sealing plate also includes one gasket and one set of screws to join sections.
Telescope Fitting, Lay-In Length is easily adjustable from 1.00 in. (25 mm) to 7.00 in. (178 mm). No cutting or welding required. Bulletin: F10 Catalog Number F22LA F44LA F66LA F88LA F126LA a
AxB in. 2.50 x 2.50 4.00 x 4.00 6.00 x 6.00 8.00 x 8.00 12.00 x 6.00
Sealing Plates Typea Special Special Special Special Special
AxB mm 64 x 64 102 x 102 152 x 152 203 x 203 305 x 152
Sealing Plates Qty.a 1 1 1 1 1
Each sealing plate also includes one gasket and one set of screws to join sections
Cross Fitting Used when there are four branches, all open along the same side. Bulletin: F10 Catalog Number F22LC F44LC F66LC F88LC F126LC a
AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 12.00 x 6.00 305 x 152
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 3
Flat
3
Flat
3
Flat
3
Flat
3
G in./mm 8.50 216 10.00 254 12.00 305 14.00 356 18.00 457
K in./mm 4.25 108 5.00 127 6.00 152 7.00 178 9.00 229
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association
5
Cable and Wire Management
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION SOLUTIONS Spec-00321 H
Lay-In Wireway Lay-In NEMA Type 12 Wireway
90-Degree Elbow—Outside Top Opening This elbow fitting allows a vertical drop to equipment below at a 90-degree corner while maintaining the top opening lay-in feature. Bulletin: F10
AxB in./mm 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203
Catalog Number F44LE9AC F66LE9AC F88LE9AC
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 2
Flat
2
Flat
2
H in./mm 5.00 127 6.00 152 7.00 178
a
Each sealing plate also includes one gasket and one set of screws to join sections.
90-Degree Elbows
Inside Opening
Because sections of lay-in wireway can be mounted with covers oriented in any direction, three different 90-degree elbows are available. Proper selection allows the user to maintain the same access and thereby preserve the lay-in feature for right-angle installations. Bulletin: F10
F44LE9A F66LE9A F88LE9A F126LE9A
F44LE9B F66LE9B
Top Opening Catalog Number F22LE9A
Catalog Number F22LE9B
AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 12.00 x 6.00 305 x 152
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 1
Flat
1
Flat
1
Flat
1
Flat
1
F88LE9B K in./mm 4.25 108 5.00 127 6.00 152 7.00 178 9.00 229
F126LE9B
AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 12.00 x 6.00 305 x 152
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 1
Flat
1
Flat
1
Flat
1
Flat
1
H in./mm 4.25 108 5.00 127 6.00 152 7.00 178 6.00 152
a
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association.
a
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association.
Outside Opening Catalog Number F22LE9C F44LE9C F66LE9C F88LE9C F126LE9C
AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 12.00 x 6.00 305 x 152
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 1
Flat
1
Flat
1
Flat
1
Flat
1
H in./mm 4.25 108 5.00 127 6.00 152 7.00 178 6.00 152
a
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association.
EQUIPMENT PROTECTION SOLUTIONS Spec-00321 H
PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM
Cable and Wire Management
6
Lay-In Wireway Lay-In NEMA Type 12 Wireway
45-Degree Elbows
Inside Opening
Because sections of lay-in wireway can be mounted with covers oriented in any direction, three different 45-degree elbows are available. Proper selection allows the user to maintain the same access and thereby preserve the lay-in feature for right-angle installations. Bulletin: F10
F44LE45A F66LE45A F88LE45A F126LE45A a
F44LE45B F66LE45B
Top Opening Catalog Number F22LE45A
Catalog Number F22LE45B
AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 12.00 x 6.00 305 x 152
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 1
Flat
1
Flat
1
Flat
1
Flat
1
F88LE45B J in./mm 2.00 51 2.44 62 3.00 76 3.75 95 4.75 121
AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 1
Flat
1
Flat
1
Flat
1
J in./mm 2.00 51 2.44 62 3.00 76 3.75 95
a
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association.
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association
Outside Opening Catalog Number F22LE45C F44LE45C F66LE45C F88LE45C
AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 1
Flat
1
Flat
1
Flat
1
J in./mm 2.00 51 2.44 62 3.00 76 3.75 95
a
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association
7
Cable and Wire Management
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION SOLUTIONS Spec-00321 H
Lay-In Wireway Lay-In NEMA Type 12 Wireway
Tee Fitting—Top Opening This fitting is used when the covers of all three branches of the wireway run are open along the same side. Bulletin: F10 AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 12.00 x 6.00 305 x 152
Catalog Number F22LTA F44LTA F66LTA F88LTA F126LTA
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 2
Flat
2
Flat
2
Flat
2
Flat
2
G in./mm 8.50 216 10.00 254 12.00 305 14.00 356 18.00 457
K in./mm 4.25 108 5.00 127 6.00 152 7.00 178 9.00 229
a
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association.
Tee Fitting—Outside Top Opening This fitting is used when the covers of two branches are on the same side and the third is on a different side. Bulletin: F10 AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203
Catalog Number F22LTC F44LTC F66LTC F88LTC
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 2
Flat
2
Flat
2
Flat
2
G in./mm 8.50 216 10.00 254 12.00 305 14.00 356
K in./mm 4.25 108 5.00 127 6.00 152 7.00 178
a
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association.
Junction Box The junction box has a removable panel on which terminal blocks and other components may be mounted. Bulletin: F10 Catalog Number F22LJ F44LJ F66LJ F88LJ
AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203
Sealing Plates, Type Flat
Sealing Plates, Qty.a 1
Flat
1
Flat
1
Flat
1
M in./mm 12.00 305 14.00 356 16.00 406 18.00 457
N in./mm 10.25 260 13.88 353 17.88 454 21.88 556
Removable Panel Size in./mm 8.75 x 6.88 222 x 175 10.75 x 8.88 273 x 225 12.75 x 10.88 324 x 276 14.75 x 12.88 375 x 327
a
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association.
EQUIPMENT PROTECTION SOLUTIONS Spec-00321 H
PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM
Cable and Wire Management
8
Lay-In Wireway Lay-In NEMA Type 12 Wireway
Closure Plate Used to seal the end of a wireway section or run. Bulletin: F10 Catalog Number F22LP
Sealing Plates, Typea 90°
Sealing Plates, Qty.a 1
F44LP
90°
1
F66LP
90°
1
F88LP
90°
1
F126LP
90°
1
a
D in./mm 3.88 99 5.38 137 7.62 194 9.62 244 13.62 346
E in./mm 3.88 99 5.38 137 7.62 194 9.62 244 7.62 194
Each sealing plate also includes one gasket and one set of screws to join sections.
Reducer This fitting permits the lay-in feature to be retained when reducing to a smaller wireway size. Bulletin: F10 Catalog Number F44LRE22
Sealing Plates, Type None
Sealing Plates, Qty. 0
F66LRE44
None
0
F88LRE66
None
0
F126LRE66
None
0
F126LRE44
None
0
From A x B in./mm 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 12.00 x 6.00 305 x 152 12.00 x 6.00 305 x 152
To A x B in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 6.00 x 6.00 152 x 152 4.00 x 4.00 102 x 102
Certified by Canadian Standards Association.
Nipple Available in lengths of 1.00 in. (25 mm), 2.00 in. (51 mm) and 3.00 in. (76 mm). Bulletin: F10 Catalog Number F22LN1 F22LN2 F22LN3 F44LN1 F44LN2 F44LN3 F66LN1 F66LN2 F66LN3 a
AxBxC in./mm 2.50 x 2.50 x 1.00 64 x 64 x 25 2.50 x 2.50 x 2.00 64 x 64 x 51 2.50 x 2.50 x 3.00 64 x 64 x 76 4.00 x 4.00 x 1.00 102 x 102 x 25 4.00 x 4.00 x 2.00 102 x 102 x 51 4.00 x 4.00 x 3.00 102 x 102 x 76 6.00 x 6.00 x 1.00 152 x 152 x 25 6.00 x 6.00 x 2.00 152 x 152 x 51 6.00 x 6.00 x 3.00 152 x 152 x 76
Sealing Plates, Typea Special
Sealing Plates, Qty.a 1
Special
1
Special
1
Special
1
Special
1
Special
1
Special
1
Special
1
Special
1
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association.
9
Cable and Wire Management
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION SOLUTIONS Spec-00321 H
Lay-In Wireway Lay-In NEMA Type 12 Wireway
Drop Hanger Hangers are used to support a wireway run. The drop hanger is normally attached to an overhead beam or ceiling. Bulletin: F20 Catalog Number F22HD
Sealing Plates, Typea None
Sealing Plates, Qty.a 0
F44HD
None
0
F66HD
None
0
F88HD
None
0
S in./mm 9.25 235 11.75 298 15.25 387 20.56 522
T in./mm 4.50 114 6.00 152 8.12 206 12.12 308
a
Each sealing plate also includes one gasket and one set of screws to join sections.
Bracket Hanger Hangers are used to support a wireway run. The bracket hanger can be used for wall, floor or ceiling installations. Bulletin: F20 P in./mm 4.62 117 6.12 155 8.25 210 10.25 260
Catalog Number F22HB F44HB F66HB F88HB
R in./mm 3.62 92 3.62 92 3.62 92 3.62 92
U in./mm 4.38 111 5.88 149 7.88 200 11.25 286
Box Connector When wireway enters an enclosure, a box connector should be used on the inside of the enclosure to ensure a tight seal. Bulletin: F10 Catalog Number F22LB
Sealing Plates, Typea 90°
Sealing Plates, Qty.a 1
F44LB
90°
1
F66LB
90°
1
F88LB
90°
1
F126LB
90°
1
D in./mm 3.88 99 5.38 137 7.62 194 9.62 244 13.62 346
E in./mm 3.88 99 5.38 137 7.62 194 9.62 244 7.62 194
a
Each sealing plate also includes one gasket and one set of screws to join sections.
EQUIPMENT PROTECTION SOLUTIONS Spec-00321 H
PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM
Cable and Wire Management
10
Lay-In Wireway Lay-In NEMA Type 12 Wireway
Transposition Sections
90-Degree Elbow—Clockwise
These fittings are used when it is necessary to rotate the open side of the wireway run by 90 degrees and still retain the lay-in feature. Bulletin: F10
F44LE9KT
Clockwise AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152
Catalog Number F22LKT F44LKT F66LKT a
Catalog Number F22LE9KT
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 1
Flat
1
Flat
1
F66LE9KT F88LE9KT
AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 1
Flat
1
Flat
1
Flat
1
H in./mm 2.45 108 5.00 127 6.00 452 7.00 178
a
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association.
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association.
90-Degree Elbow—Counterclockwise Catalog Number F22LE9KOKT
Counterclockwise Catalog Number F22LKOKT F44LKOKT F66LKOKT a
AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 1
Flat
1
Flat
1
F44LE9KOKT F66LE9KOKT F88LE9KOKT
AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203
Sealing Plates, Typea Flat
Sealing Plates, Qty.a 1
Flat
1
Flat
1
Flat
1
H in./mm 4.25 108 5.00 127 6.00 152 7.00
a
Each sealing plate also includes one gasket and one set of screws to join sections.
Each sealing plate also includes one gasket and one set of screws to join sections.
Certified by Canadian Standards Association.
Certified by Canadian Standards Association.
Barrier Kits, Bracket-Mounted Spring steel brackets hold barriers in place by friction fit inside wireway. Order barrier and bracket separately. Recommended spacing in increments of 3 ft. (.9 m). Bulletin: F10
Two or Three Compartment Catalog Number F44B360 F66B560 a
Sealing Plates (qty.)a 1 pkg.a (5 pcs.) 1 pkg.a (5 pcs.)
W (in.) 3.00 4.50
W (mm) 76 114
Package consists of five barriers or five brackets. Each barrier is 60 inches long.
Two Compartment Catalog Number F44BB2C F66BB2C
Sealing Plates (qty.)a 1 pkg. 1 pkg.
W (in.) 3.00 4.50
W (mm) 76 114
a
Package consists of five barriers or five brackets. Each barrier is 60 inches long.
Three Compartment Catalog Number F44BB3C F66BB3C
Sealing Plates (qty.)a 1 pkg. 1 pkg.
W (in.) 3.00 4.50
W (mm) 76 114
a
Package consists of five barriers or five brackets. Each barrier is 60 inches long.
11
Cable and Wire Management
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION SOLUTIONS Spec-00321 H
Lay-In Wireway Lay-In NEMA Type 12 Wireway
Barrier Kit, Bolt-On Divides wireway into two or more compartments. Barriers are fastened to wireway sections with screws. Sealing washers are included. Bulletin: F20 Catalog Number F33BK60 F44BK60 F66BK60 F88BK60
W in./mm 2.00 51 3.00 76 4.50 114 6.00 152
AxB in./mm 3.00 x 3.00 76 x 76 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203
90-Degree Angle Sealing Plate When joining a lay-in section or fitting to a closure plate, a box connector, a non-lay-in cut-off fitting or any similar non-lay-in section or fitting, a F____LSAG 90-degree angle sealing plate is required at each junction. Hoffman furnishes this plate with fittings. Additional 90-degree angle sealing plates may be required in some cases. Plate includes a flange gasket and flange screws, not shown in drawing. Bulletin: F10 Catalog Number F22LSAG F44LSAG F66LSAG F88LSAG F126LSAG
AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 12.00 x 6.00 305 x 152
Each sealing plate also includes one gasket and one set of screws to join sections.
Quick-Release Flat Sealing Plate This exclusive Hoffman-designed hinged sealing plate permits quick and easy access to the wireway interior without using a tool. Bulletin: F10
Catalog Number F22LSGQR F44LSGQR F66LSGQR F88LSGQR F126LSGQR
AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 12.00 x 6.00 305 x 152
Each sealing plate also includes one gasket and one set of screws to join sections.
EQUIPMENT PROTECTION SOLUTIONS Spec-00321 H
PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM
Cable and Wire Management
12
