LBUH UH Series Brochure 11 13
uh
SERIES
detroit radiant
fa
uh SERIES gas-fired, separated combustion unit heater The UH Series line of gas-fired, tubular exchanger, induced draft hot air heaters are now available for use in commercial, industrial, agricultural and residential applications. This line of heaters features a low profile design with a durable, powder-coated black enamel exterior and stainless steel louvers for an exceptional aesthetic appeal. Additional features include operational troubleshooting lights, finger-proof fan guards, and integrated mounting brackets for ease in installation. The UH Series can be used as separated combustion or power-vented combustion out -of-the-box.
products company Compact Comfort
MODEL Number UH-30 UH-45 UH-60 UH-75
Gas Type Nat. or LP Nat. or LP Nat. or LP Nat. or LP
Typical Approx. AvERaGE VENT BTU/H Mounting Heat air Temp Ship LENGTH INPUT OUTPUT Height Throw Rise Min. Max. weight 30,000
24,000
8 to 12 Ft.
26 Ft.
45°F
3 Ft. 30 Ft.
77 Lbs.
45,000
36,000
8 to 14 Ft.
28 Ft.
45°F
3 Ft. 30 Ft.
77 Lbs.
60,000
48,000
10 to 16 Ft.
37 Ft.
45°F
3 Ft. 30 Ft.
98 Lbs.
75,000
60,000
10 to 18 Ft.
39 Ft.
45°F
3 Ft. 30 Ft.
98 Lbs.
TYPICAL APPLICATIONS
PRODUCT FEATURES Operational Indicator Lights
Fan Guard
• Greenhouses
Mounting Brackets
• Garages Stainless Steel Discharge Louvers Aluminized Steel Tubular Heat Exchangers
• Check-in/out Areas • Vestibules • Entrance Ways • Work Stations • Spot or Total Building Heat
Service Access Handle Burner Sight Glass
Powder Coated Black Enamel Exterior
• Compact, aesthetically pleasing construction. • Easy to install with minimal assembly required. • Mounting brackets are standard. • Indicator lights are standard. • Finger proof fan guards are standard. • All UH models can be rotated 180˚. • North American ETL certified for both indoor and residential use.
detroit radiant products co. 21400 Hoover Rd. Warren, MI 48089-3162 Phone: Toll Free: Fax: Email: Website:
(586) 756-0950 1-800-222-1100 (586) 756-2626 [email protected] www.detroitradiant.com
Visit Our Website For: Product Specs Parts Support Dealer Locator Applications
C.A.D. Library Design Guidelines Theory of Infrared and More!
uh SERIES
SPECIFICATIONS PRODUCT SPECIFICATIONS
MOUNTING:
VOLTAGE:
• 120/60Hz.VAC (primary). • 24 VAC (thermostatic). • Single phase.
Input Range:
30,000 to 75,000 BTU/h
Gas Type:
Natural or Propane
Burner Control Box:
Powder Coated Black Enamel
• Natural Gas - 3.5 Inches W.C. • Propane Gas - 10.0 Inches W.C.
Radiant Exchanger Tubes:
Tubular Aluminized Steel
INLET PRESSURE:
Certification:
ETL Listed North America
Limited Warranty:
MANIFOLD PRESSURE:
1-3-5 (Components-Exchangers-
• Natural Gas - 5.0 to 14.0” W.C. • Propane Gas - 11.0 to 14.0” W.C.
Burners)
GAS CONNECTION
24V Controls:
Thermostat Connection
Operational Indicator Lights:
Standard
• Four (4) suspension points. • Slotted mounting brackets accommodate joists on 16 or 24 inch centers. • 180˚ mounting
CERTIFICATIONS:
• ANSI Z83.8/CSA 2.6 • Commercial & Industrial use. • Residential use. • Indoor use only.
OTHER
•External indicator lights. • External thermostatic • 1/2” N.P.T. connection. • Field connect to valve. • Approved for elevations 0 - 2,000 ft. without VENT & INLET CONNECTION: modifications. • Category l or lll venting. • Supplied standard as • Rear, horizontal discharge/inlet. separated combustion. • 3” to 4” inlet adapter included for UH-30 and UH-45 models
Available uh SERIES models & dimensions Model
FLA AMPS
Motor Type
MoTor HP
Fan DiaMeter
Axial Fan Rotation
Gas Connection
Inlet & Vent Connection
heater width dim “a”
heater depth dim “b”
heater height dim “c”
air to vent dim “d”
UH-30
2.7
SP
1/15
10 in.
CCW
1/2” NPT
3” O.D.
28 in.
17 in.
12 in.
4.4 in
UH-45
2.7
SP
1/15
10 in.
CCW
1/2” NPT
3” O.D.
28 in.
17 in.
12 in.
4.4 in
UH-60
4.0
PSC
1/12
14 in.
CCW
1/2” NPT
4” O.D.
28 in.
17 in.
17 in.
7.4 in
UH-75
4.0
PSC
1/12
14 in.
CCW
1/2” NPT
4” O.D.
28 in.
17 in.
17 in.
7.4 in.
Top View
Rear View
7.12”
DIM. A
3.78” DIM. D
DIM. B
DIM. C
6.54”
3.96”
5.3”
2.86” DIM. A
uh SERIES clearances All Models
Front
Top and Bottom
Access Side
Non-Access Side
Rear
Vent Connection
Clearance to Combustibles
60 in.
1 in.
18 in.
1 in.
1 in.
6 in.
Clearance to Allow Service
60 in.
1 in.
18 in.
1 in.
18 in.
6 in.
FRONT VIEW
Vent Connection
Top
SIDE VIEW
Top
NonAccess Side
Access Side
Front Rear
Bottom
DISTRIBUTED BY:
Bottom
LBUH-UH 11/13 DRP
SERIES
detroit radiant
fa
uh SERIES gas-fired, separated combustion unit heater The UH Series line of gas-fired, tubular exchanger, induced draft hot air heaters are now available for use in commercial, industrial, agricultural and residential applications. This line of heaters features a low profile design with a durable, powder-coated black enamel exterior and stainless steel louvers for an exceptional aesthetic appeal. Additional features include operational troubleshooting lights, finger-proof fan guards, and integrated mounting brackets for ease in installation. The UH Series can be used as separated combustion or power-vented combustion out -of-the-box.
products company Compact Comfort
MODEL Number UH-30 UH-45 UH-60 UH-75
Gas Type Nat. or LP Nat. or LP Nat. or LP Nat. or LP
Typical Approx. AvERaGE VENT BTU/H Mounting Heat air Temp Ship LENGTH INPUT OUTPUT Height Throw Rise Min. Max. weight 30,000
24,000
8 to 12 Ft.
26 Ft.
45°F
3 Ft. 30 Ft.
77 Lbs.
45,000
36,000
8 to 14 Ft.
28 Ft.
45°F
3 Ft. 30 Ft.
77 Lbs.
60,000
48,000
10 to 16 Ft.
37 Ft.
45°F
3 Ft. 30 Ft.
98 Lbs.
75,000
60,000
10 to 18 Ft.
39 Ft.
45°F
3 Ft. 30 Ft.
98 Lbs.
TYPICAL APPLICATIONS
PRODUCT FEATURES Operational Indicator Lights
Fan Guard
• Greenhouses
Mounting Brackets
• Garages Stainless Steel Discharge Louvers Aluminized Steel Tubular Heat Exchangers
• Check-in/out Areas • Vestibules • Entrance Ways • Work Stations • Spot or Total Building Heat
Service Access Handle Burner Sight Glass
Powder Coated Black Enamel Exterior
• Compact, aesthetically pleasing construction. • Easy to install with minimal assembly required. • Mounting brackets are standard. • Indicator lights are standard. • Finger proof fan guards are standard. • All UH models can be rotated 180˚. • North American ETL certified for both indoor and residential use.
detroit radiant products co. 21400 Hoover Rd. Warren, MI 48089-3162 Phone: Toll Free: Fax: Email: Website:
(586) 756-0950 1-800-222-1100 (586) 756-2626 [email protected] www.detroitradiant.com
Visit Our Website For: Product Specs Parts Support Dealer Locator Applications
C.A.D. Library Design Guidelines Theory of Infrared and More!
uh SERIES
SPECIFICATIONS PRODUCT SPECIFICATIONS
MOUNTING:
VOLTAGE:
• 120/60Hz.VAC (primary). • 24 VAC (thermostatic). • Single phase.
Input Range:
30,000 to 75,000 BTU/h
Gas Type:
Natural or Propane
Burner Control Box:
Powder Coated Black Enamel
• Natural Gas - 3.5 Inches W.C. • Propane Gas - 10.0 Inches W.C.
Radiant Exchanger Tubes:
Tubular Aluminized Steel
INLET PRESSURE:
Certification:
ETL Listed North America
Limited Warranty:
MANIFOLD PRESSURE:
1-3-5 (Components-Exchangers-
• Natural Gas - 5.0 to 14.0” W.C. • Propane Gas - 11.0 to 14.0” W.C.
Burners)
GAS CONNECTION
24V Controls:
Thermostat Connection
Operational Indicator Lights:
Standard
• Four (4) suspension points. • Slotted mounting brackets accommodate joists on 16 or 24 inch centers. • 180˚ mounting
CERTIFICATIONS:
• ANSI Z83.8/CSA 2.6 • Commercial & Industrial use. • Residential use. • Indoor use only.
OTHER
•External indicator lights. • External thermostatic • 1/2” N.P.T. connection. • Field connect to valve. • Approved for elevations 0 - 2,000 ft. without VENT & INLET CONNECTION: modifications. • Category l or lll venting. • Supplied standard as • Rear, horizontal discharge/inlet. separated combustion. • 3” to 4” inlet adapter included for UH-30 and UH-45 models
Available uh SERIES models & dimensions Model
FLA AMPS
Motor Type
MoTor HP
Fan DiaMeter
Axial Fan Rotation
Gas Connection
Inlet & Vent Connection
heater width dim “a”
heater depth dim “b”
heater height dim “c”
air to vent dim “d”
UH-30
2.7
SP
1/15
10 in.
CCW
1/2” NPT
3” O.D.
28 in.
17 in.
12 in.
4.4 in
UH-45
2.7
SP
1/15
10 in.
CCW
1/2” NPT
3” O.D.
28 in.
17 in.
12 in.
4.4 in
UH-60
4.0
PSC
1/12
14 in.
CCW
1/2” NPT
4” O.D.
28 in.
17 in.
17 in.
7.4 in
UH-75
4.0
PSC
1/12
14 in.
CCW
1/2” NPT
4” O.D.
28 in.
17 in.
17 in.
7.4 in.
Top View
Rear View
7.12”
DIM. A
3.78” DIM. D
DIM. B
DIM. C
6.54”
3.96”
5.3”
2.86” DIM. A
uh SERIES clearances All Models
Front
Top and Bottom
Access Side
Non-Access Side
Rear
Vent Connection
Clearance to Combustibles
60 in.
1 in.
18 in.
1 in.
1 in.
6 in.
Clearance to Allow Service
60 in.
1 in.
18 in.
1 in.
18 in.
6 in.
FRONT VIEW
Vent Connection
Top
SIDE VIEW
Top
NonAccess Side
Access Side
Front Rear
Bottom
DISTRIBUTED BY:
Bottom
LBUH-UH 11/13 DRP
