LED Optical Systems
LED Optical Systems pLED (PicoPrism™) and eLED (PicoEmitter™) pLED
eLED
(PicoPrism)
(PicoEmitter )
Altitude (ALT)
•
––
WARP9 (WP9L/WP9S)
•
•
LUMINAIRE
pLED (PicoPrism) Benefits • Sealed light engine • Up to 22,000 lumens* • Higher mounting heights for site, area and security applications • Higher light output requirements • Greater pole spacing requirements
Archetype (AR/SAR)
•
•
• 700mA, Class 2 for higher wattage applications
PicoPrism module
• Higher efficacy, up to 107 lumens per watt Structural (STL/STS)
•
•
eLED (PicoEmitter) Benefits Entablature (ET/SET)
•
•
Curvilinear Cutoff (CC17/CC21)
––
•
Matrix (MX21)
––
•
Solitaire (SRS1)
––
•
Bounce (BNS1)
––
•
Era (RA17/RA21)
––
•
• Replaces MicroEmitter® • 25% more lumen output than MicroEmitter • Sealed optical chamber • If a lens is required for look, or by preference • Lens provides increased vandal resistance • For pedestrian applications at lower mounting heights and a higher degree of visual comfort
PicoEmitter module
• 350mA, Class 1 for lower wattage applications
Common Features for PicoEmitter and PicoPrism • Exceptional uniformity and low glare for visual comfort • Controls ready. All luminaires have 0-10V dimming built in
Era Bell (BE17/BE21)
––
•
• 3000K, 4200K and 5100 CCT • All standard IES distributions (Type I, II, III, IV, V, R, L and custom)
Era Acorn (AE17/AE21)
––
•
• Neighbor-friendly optic, factory or field installable • Field-upgrade kits available for existing installations
Era Lantern (LE19/LE26)
––
•
• Meets California Title 24 and ASHRAE regulations for energy efficiency • Meets DLC 2014 standards
Wall Director (WD14/WD18)
––
• * Altitude lumen values are higher. See specification sheet for data.
www.kimlighting.com • 16555 East Gale Avenue • City of Industry, CA 91745 • Phone: 626.968.5666 • Fax: 626.369.2695 Patent pending. Because of continuing product improvement programs, Kim Lighting reserves the right to change specifications without notice. Entire contents © Copyright 2013 Kim Lighting Inc. All rights reserved. Reproduction in whole or in part without permission is strictly prohibited. Printed in USA.
eLED
(PicoPrism)
(PicoEmitter )
Altitude (ALT)
•
––
WARP9 (WP9L/WP9S)
•
•
LUMINAIRE
pLED (PicoPrism) Benefits • Sealed light engine • Up to 22,000 lumens* • Higher mounting heights for site, area and security applications • Higher light output requirements • Greater pole spacing requirements
Archetype (AR/SAR)
•
•
• 700mA, Class 2 for higher wattage applications
PicoPrism module
• Higher efficacy, up to 107 lumens per watt Structural (STL/STS)
•
•
eLED (PicoEmitter) Benefits Entablature (ET/SET)
•
•
Curvilinear Cutoff (CC17/CC21)
––
•
Matrix (MX21)
––
•
Solitaire (SRS1)
––
•
Bounce (BNS1)
––
•
Era (RA17/RA21)
––
•
• Replaces MicroEmitter® • 25% more lumen output than MicroEmitter • Sealed optical chamber • If a lens is required for look, or by preference • Lens provides increased vandal resistance • For pedestrian applications at lower mounting heights and a higher degree of visual comfort
PicoEmitter module
• 350mA, Class 1 for lower wattage applications
Common Features for PicoEmitter and PicoPrism • Exceptional uniformity and low glare for visual comfort • Controls ready. All luminaires have 0-10V dimming built in
Era Bell (BE17/BE21)
––
•
• 3000K, 4200K and 5100 CCT • All standard IES distributions (Type I, II, III, IV, V, R, L and custom)
Era Acorn (AE17/AE21)
––
•
• Neighbor-friendly optic, factory or field installable • Field-upgrade kits available for existing installations
Era Lantern (LE19/LE26)
––
•
• Meets California Title 24 and ASHRAE regulations for energy efficiency • Meets DLC 2014 standards
Wall Director (WD14/WD18)
––
• * Altitude lumen values are higher. See specification sheet for data.
www.kimlighting.com • 16555 East Gale Avenue • City of Industry, CA 91745 • Phone: 626.968.5666 • Fax: 626.369.2695 Patent pending. Because of continuing product improvement programs, Kim Lighting reserves the right to change specifications without notice. Entire contents © Copyright 2013 Kim Lighting Inc. All rights reserved. Reproduction in whole or in part without permission is strictly prohibited. Printed in USA.
