Lexmark Intuition S505 Adapter Replacement

Lexmark Intuition S505 Adapter Replacement

Lexmark Intuition S505 Adapter Replacement This guide will inform readers how to install the adapter for the printer.

Written By: Raymond

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Lexmark Intuition S505 Adapter Replacement

INTRODUCTION The adapter connects the power chord to the printer.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Lexmark Intuition S505 Adapter Replacement

Step 1 — Adapter 

Locate adapter and observe that the two contacts, marked by the red rectangle, of the adapter are facing up.



Insert adapter into the bottom-right slot behind the printer with the adapter end facing outward.

Step 2

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Lexmark Intuition S505 Adapter Replacement

Step 3 

Firmly push adapter in until you hear a click.

The adapter should be securely inserted into the back end of the printer and be ready for use. This document was last generated on 2017-06-27 06:50:48 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4