LG G Pad 8.3 Rear Facing Camera Replacement
LG G Pad 8.3 Rear Facing Camera Replacement
LG G Pad 8.3 Rear Facing Camera Replacement This guide will show you how to replace the rear facing camera.
Written By: Mario Salguero
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 10
LG G Pad 8.3 Rear Facing Camera Replacement
INTRODUCTION If your rear facing camera is not working, it may be time to replace it. This guide will show you how to replace the rear facing camera.
TOOLS: Metal Spudger (1) Phillips #00 Screwdriver (1) Phillips #000 Screwdriver (1) iFixit Opening Tools (1) iOpener Kit (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 10
LG G Pad 8.3 Rear Facing Camera Replacement
Step 1 — Back Panel
With the tablet face down, pull out the SD card slot cover.
Using a Philips #000 screwdriver, remove the 3mm screw in the SD card slot.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 10
LG G Pad 8.3 Rear Facing Camera Replacement
Step 2
Insert a plastic opening tool in the small crevasse between the screen and the back.
Pry the screen away from the back panel.
Repeat this on each edge of the device.
We found it helpful to leave multiple plastic opening tools wedged in the crevasse to prevent it from closing.
This requires heavy force. The back of the device is attached with adhesive. If the back panel is too hard to remove, use the iOpener.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 10
LG G Pad 8.3 Rear Facing Camera Replacement
Step 3
After using the plastic opening tools, pry open the device with your hands, removing the back panel from the screen.
Step 4 — Speaker
Remove the four 3 mm Phillips screws that hold down the speaker.
These screws are very small so make sure to keep track of them. You can use iFixit's Pro Magnetic Project Mat to help. © iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 10
LG G Pad 8.3 Rear Facing Camera Replacement
Step 5
Use your fingers to remove the speaker.
Step 6 — Battery
With a Philips screwdriver #000 unscrew the 3mm screws at the corners of the battery.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 10
LG G Pad 8.3 Rear Facing Camera Replacement
Step 7
Using a spudger or plastic opening tool, disconnect the ribbon cable from the right side of the device, where it is attached with adhesive.
These images use a metal spudger, which has the potential to damage the device. Use a plastic opening tool or standard spudger instead.
Step 8
Use the Philips screwdriver #000 to remove the 3mm screws at the bottom of the tape.
Remove the yellow tape from the device.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 7 of 10
LG G Pad 8.3 Rear Facing Camera Replacement
Step 9
Unhook the battery from where it is attached at the top of the device.
Step 10 — Motherboard
© iFixit — CC BY-NC-SA
www.iFixit.com
Unhook the small yellow ribbon on top of the motherboard.
Page 8 of 10
LG G Pad 8.3 Rear Facing Camera Replacement
Step 11
Remove all the 3mm silver screws and the 2mm black screws on the motherboard and carefully lift it out of the device.
Step 12
Use a plastic opening tool to lift the motherboard out of the device.
These images use a metal spudger, which has the potential to damage the device. Use a plastic opening tool or standard spudger instead.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 9 of 10
LG G Pad 8.3 Rear Facing Camera Replacement
Step 13 — Rear Facing Camera
Use a plastic opening tool to remove the camera, which is attached with adhesive to the front of the tablet.
These images use a metal spudger, which has the potential to damage the device. Use a plastic opening tool or standard spudger instead.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-08-11 12:21:03 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 10 of 10
LG G Pad 8.3 Rear Facing Camera Replacement This guide will show you how to replace the rear facing camera.
Written By: Mario Salguero
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 10
LG G Pad 8.3 Rear Facing Camera Replacement
INTRODUCTION If your rear facing camera is not working, it may be time to replace it. This guide will show you how to replace the rear facing camera.
TOOLS: Metal Spudger (1) Phillips #00 Screwdriver (1) Phillips #000 Screwdriver (1) iFixit Opening Tools (1) iOpener Kit (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 10
LG G Pad 8.3 Rear Facing Camera Replacement
Step 1 — Back Panel
With the tablet face down, pull out the SD card slot cover.
Using a Philips #000 screwdriver, remove the 3mm screw in the SD card slot.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 10
LG G Pad 8.3 Rear Facing Camera Replacement
Step 2
Insert a plastic opening tool in the small crevasse between the screen and the back.
Pry the screen away from the back panel.
Repeat this on each edge of the device.
We found it helpful to leave multiple plastic opening tools wedged in the crevasse to prevent it from closing.
This requires heavy force. The back of the device is attached with adhesive. If the back panel is too hard to remove, use the iOpener.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 10
LG G Pad 8.3 Rear Facing Camera Replacement
Step 3
After using the plastic opening tools, pry open the device with your hands, removing the back panel from the screen.
Step 4 — Speaker
Remove the four 3 mm Phillips screws that hold down the speaker.
These screws are very small so make sure to keep track of them. You can use iFixit's Pro Magnetic Project Mat to help. © iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 10
LG G Pad 8.3 Rear Facing Camera Replacement
Step 5
Use your fingers to remove the speaker.
Step 6 — Battery
With a Philips screwdriver #000 unscrew the 3mm screws at the corners of the battery.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 10
LG G Pad 8.3 Rear Facing Camera Replacement
Step 7
Using a spudger or plastic opening tool, disconnect the ribbon cable from the right side of the device, where it is attached with adhesive.
These images use a metal spudger, which has the potential to damage the device. Use a plastic opening tool or standard spudger instead.
Step 8
Use the Philips screwdriver #000 to remove the 3mm screws at the bottom of the tape.
Remove the yellow tape from the device.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 7 of 10
LG G Pad 8.3 Rear Facing Camera Replacement
Step 9
Unhook the battery from where it is attached at the top of the device.
Step 10 — Motherboard
© iFixit — CC BY-NC-SA
www.iFixit.com
Unhook the small yellow ribbon on top of the motherboard.
Page 8 of 10
LG G Pad 8.3 Rear Facing Camera Replacement
Step 11
Remove all the 3mm silver screws and the 2mm black screws on the motherboard and carefully lift it out of the device.
Step 12
Use a plastic opening tool to lift the motherboard out of the device.
These images use a metal spudger, which has the potential to damage the device. Use a plastic opening tool or standard spudger instead.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 9 of 10
LG G Pad 8.3 Rear Facing Camera Replacement
Step 13 — Rear Facing Camera
Use a plastic opening tool to remove the camera, which is attached with adhesive to the front of the tablet.
These images use a metal spudger, which has the potential to damage the device. Use a plastic opening tool or standard spudger instead.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-08-11 12:21:03 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 10 of 10
