Power off the device by holding down the worded red button labeled PWR.
Remove the battery pack cover by pushing down on the solid lines at the top end of the cover. Slide the cover down while still applying the pushing force on the top and remove the cover completely.
Step 2
Place your finger into the semicircle gap where the lines on the cover would be if it were still attached.
Push down and pull so that the battery pops out away from the body of the phone.
Pick up the phone battery and dispose of it properly.
While wearing gloves, wipe down the battery compartment and remove any debris or battery acid. Avoid contact with battery acid as it can be damaging to eyes or skin.
Insert a new Lithium Ion 3.7V 1100mAh battery into the compartment (34mm x 55mm x 6mm)
Step 4
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-18 05:54:04 PM.