Lithium-Ion Battery-Powered Tools
Lithium-Ion Battery-Powered Tools
Thomas & Betts. Your best connection for innovative solutions.
Wire & Cable Management
•
Cable Protection Systems
•
Power Connection & Control
•
S a f e t y Te c h n o l o g y
Compression Tools
Lithium-Ion Battery-Powered Tools The Blackburn line of 6-ton to 15-ton compression and cutting tools is equipped with lithium-ion (Li) battery technology ®
• 14.4 V lithium-ion battery offers lighter weight, longer run time, no memory effect, minimal discharge and rapid recharge • Visual indication of complete crimp compression (green/orange/red)
• All tools and batteries come with a standard 5-year warranty • Covers a wide range of applications in both the electrical and utility markets
Li 6-Ton Open Crimp Tool
Li 6-Ton Closed Crimp Tool
• Designed for one-handed control ram advancement and retraction • Open yoke design with rotating head allows for maximum crimping flexibility • Protective rubber insulated boot on head • Rapid advance feature decreases crimp time • 14.4 V DC • Approx. 350 crimps per full charge (based on 3/0 cable)
• Designed for one-handed control ram advancement and retraction • Rotating head allows maximum flexibility for crimping • Rapid advance feature decreases crimp time • 14.4 V DC • Approx. 350 crimps per full charge (based on 3/0 cable)
Cat. No. TBM6PCR-LI
Dimensions (L x W x H) 13 in. x 2.5 in. x 12 in.
Capacity Cu #8-600 kcmil • Al #8-400 kcmil
Weight 8.5 lb. with battery Output 6 tons
Cat. No. TBM62PCR-LI
Dimensions (L x W x H) 13 in. x 2.5 in. x 12 in.
Capacity Cu #8-600 kcmil • Al #8-400 kcmil
Weight 8.5 lb. with battery Output 6 tons
Li 6-Ton Dieless Closed Crimp Tool
Li 6-Ton Dieless Open Crimp Tool
• Dieless tool with a 180° rotating head, uses one stationary and three movable indenting nibs, which close at 90° angles to each other so that the connector is squeezed equally at four strategic points • Crimps most connectors manufactured to ANSI C119.4 specification #6 – 750 kcmil • 14.4 V DC
• Dieless tool with a 180° rotating head, used to compress Homac®/Anderson® style lugs with 6 tons of force • Crimps most connectors manufactured to ANSI C119.4 specification #8 – 500 kcmil • 14.4 V DC
Cat. No. HMC5750-LI
Dimensions (L x W x H) 15 in. x 2.5 in. x 13 in.
Capacity Cu / Al #6-750 kcmil
www.tnb.ca
Weight 12.5 lb. with battery Output 6 tons
Cat. No. HMC5630-LI
Dimensions (L x W x H) 14 in. x 2.5 in. x 13 in.
Capacity Cu / Al #8-500 kcmil
Weight 11.5 lb. with battery Output 6 tons
Compression Tools Li Inline 6-Ton Open OD Crimp Tool
Li Inline 6-Ton Closed Crimp Tool
• Designed with a rotating 180° jaws and integrated LED work lights offering more maneuverability in tight spaces, while still providing 6 tons of scissor action crimping force • Designed for one-handed control ram advancement and retraction with a rapid advance feature which decreases crimp time • Accepts W-style dies • 14.4 V DC • Approx. 350 crimps per full charge (based on 3/0 cable)
• Designed with a rotating 180° head and integrated LED work lights offering more maneuverability in tight spaces, while still providing 6 tons of parallel action crimping force • Designed for one-handed control ram advancement and retraction with a rapid advance feature which decreases crimp time • Accepts W-style dies • 14.4 V DC • Approx. 350 crimps per full charge (based on 3/0 cable)
Cat. No. TBM6UCR-LI
Dimensions (L x W x H) 22 in. x 3.5 in. x 4.5 in.
Capacity Cu #8-300 kcmil • Al #8-4/0 kcmil
Cat. No. TBM62CR-LI
Weight 8.75 lb. with battery
Dimensions (L x W x H) 18 in. x 3.5 in. x 4.5 in.
Capacity Cu #8-600 kcmil • Al #8-400 kcmil
Output 6 tons
Output 6 tons
Li Inline 6-Ton Open Die Crimp Tool
Li 12-Ton Open Crimp Tool
• Designed with a rotating 180° jaws and integrated LED work lights offering more maneuverability in tight spaces, while still providing 6 tons of scissor action crimping force • Designed for one-handed control ram advancement and retraction with a rapid advance feature which decreases crimp time • Accepts W-style dies • 14.4 V DC • Approx. 500 crimps per full charge (based on 3/0 cable)
• Designed for one-handed control ram advancement and retraction • Rotating head allows maximum flexibility for crimping and a protective rubber boot on «C» head • Rapid advance feature decreases crimp time • 14.4 V DC • Approx. 150 crimps per full charge (based on 3/0 cable)
Cat. No. TBM6UNICR-LI
Dimensions (L x W x H) 20 in. x 3.5 in. x 4.5 in.
Capacity Cu #8-500 kcmil • Al #8-350 kcmil
Weight 8.75 lb. with battery Output 6 tons
Cat. No. TBM12PCR-LI
Dimensions (L x W x H) 16.5 in. x 3.3 in. x 12.6 in.
Weight 16.8 lb. with battery
Capacity Cu / Al #8-750 kcmil
Output 12 tons
Li 14-Ton Open Crimp Tool
Li 15-Ton Closed Crimp Tool
• Installs up to 900 kcmil copper lugs and splices and up to 750 kcmil aluminum lugs and splices • Rotating head allows maximum flexibility for crimping and a protective rubber boot on «C» head • Rapid advance feature decreases crimp time • 14.4 V DC • Approx. 150 crimps per full charge (based on 3/0 cable)
• Installs up to 1500 kcmil copper lugs and splices and up to 1250 kcmil aluminum lugs and splices • Rotating head allows maximum flexibility for crimping and a protective rubber boot • Rapid advance feature decreases crimp time • 14.4 V DC • Approx. 150 crimps per full charge (based on 3/0 cable)
Cat. No. TBM14CR-LI
Weight 8.75 lb. with battery
Dimensions (L x W x H) 19 in. x 3.5 in. x 10.5 in.
Capacity Cu #8-900 kcmil • Al #10-750 kcmil
www.tnb.ca
Weight 20 lb. with battery Output 14 tons
Cat. No. TBM15CR-LI
Dimensions (L x W x H) 21.5 in. x 3.5 in. x 10.5 in.
Capacity Cu #8-1500 kcmil • Al #10-1250 kcmil
Weight 24 lb. with battery Output 15 tons
Cutting Tools Li Cutter for 750 kcmil Cu, 636 kcmil ACSR • Designed for one-handed control of blade advancement and retraction • Cuts up to 750 kcmil copper, 2-1/8 in. O.D. aluminum and 636 kcmil ACSR • 14.4 V DC
Li Battery • Standard battery platforms across all new Li-ion tools • Provides more crimps per charge than standard Ni-MH batteries • Lithium-ion battery
Cat. No. 144-BAT-LI Cat. No. TBM54CTS-LI
Dimensions (L x W x H) 16 in. x 4.5 in. x 5 in.
Weight 5.8 lb. with battery
Dimensions (L x W x H) 4.2 in. x 3.3 in. x 2.6 in.
Capacity 30 Ah
Weight 1.2 lb.
Output 14.4 V DC
Output N/A Capacity
Cu 750 kcmil • Al 1500 kcmil • ACSR 636 kcmil
• Converts older TBM series battery tools with poke-in style battery to the new Li-ion battery platform, allowing for higher productivity as batteries are interchangeable across the Li-ion tools.
Li Cutter for Up to 1500 kcmil Al • Designed for one-handed control of blade advancement and retraction • Cuts up to 1000 kcmil copper and 1500 kcmil aluminum (not for use on ACSR) • 14.4 V DC
Cat. No. TBM54CT-LI
Dimensions (L x W x H) 16 in. x 4.5 in. x 5 in.
Weight 5.8 lb. with battery
Adapter for Li Battery
Output N/A Capacity
Cat. No. 144-ADP-LI
Dimensions (L x W x H) N/A
Capacity N/A
Weight N/A
Output N/A
Li Battery Charger • Charger works across the standard battery platform for all new Li-ion tools
Cu 1000 kcmil • Al 1500 kcmil • ACSR – Do not cut Cat. No. 144-CHR-LI
Li Cutter for Steel, ACSR, Al, Cu •D esigned for one-handed control of blade advancement and retraction with a rotating head to allow maximum flexibility for cutting • F eatures a two-stage rapid advance ram for reduced cycles with overload bypass protection, which will pop off if the material is beyond the cutter’s capacity • Cuts up to 1-1/2 in. O.D. copper, aluminum and ACSR cable • C uts rebar, ground rod up to 5/8 in. and wire rope up to 3/4 in. • 14.4 V DC Cat. No. TBM58PCTS-LI
Dimensions (L x W x H) 17.5 in. x 2.5 in. x 13 in.
Capacity Wire rope 3/4 in., Rebar 5/8 in., Ground Rod 5/8 in., ACSR 1-1/2 in., Cu / Al cable 1-1/2
www.tnb.ca
Dimensions (L x W x H) 9 in. x 5.7 in. x 3.2 in.
Input Voltage 100 – 240 V AC 50/60 Hz
Weight 3.5 lb.
Output 10.8 – 14.4 V DC 7A 28.8 V DC 3A
Interchangeable Cutting Head • For all TBM6 Series battery operated tools
Weight 14.6 lb. with battery Output N/A
Cat. No. 61520CAT
Description Interchangeable Cutting Head for TBM6 Tools
Tools and Dies
15522
15520
29
24
21
Die Code No.
15527X
15522X
15520X
Hex-Flex Die Cat. No.†
29X
24X
21X
Hex-Flex Die Code No.
15513-CK
15528
15527-CK
15522
15520
37
33
29
24
21
15513F
15528F
15527F
15522F
15520F
Full Die Cat. No.
37
33
29
24
21
Full Die, Die Code No.
15513X
15528X
15527X
15522X
15520X
Hex-Flex Die Cat. No.† ‡
37X
33X
29X
24X
TBM15CR-LI
21X
Hex-Flex Die Code No.
15527-CK
33X
TBM12PCR-LI, TBM14CR-LI
Hex-Flex Die Cat. No. 24X
37X
Die Code No.
6TON21XSS
29X
15528X
Die Cat. No. ‡
Die Code No.
6TON24XSS
15513X
45X
42X
15526
15508
54
50
45
42
15511F
15530F
15526F
15508F
54
50
45
42
15511X
15530X
15526X
15508X
54X
50X
45X
42X
21X
15508X
15530
Die Cat. No.
21
6TON29XSS 33
15526X
15511
Die Cat. No.
Aluminum
24
37
TBM6PCR-LI, TBM62PCR-LI, TBM62CR-LI, TBM6UNICR-LI
Dies for Standard Lugs and Splices
Flex/24 6TON21SS
29 15528
CONNECTOR SIZE Code Copper Red 6TON24SS
15513-CK
Hex-Flex Hex-Flex Hex-Flex Die Code Full Die Full Die No. Cat. No. † Code No.
10 AWG
6TON29SS 33X
42
50X
37/24
Blue
37X
45
54X
8 AWG
Grey 6TON33XSS
15508
15530X
8 AWG
6TON37XSS
15526
15511X
6 AWG 33
42X
50
62X
61/24
37
45X
54
15510X
91/24 6TON33SS
6TON42XSS
15530
62
6 AWG
6TON37SS
6TON45XSS
15511
15510F
4 AWG
Green
Brown
42
50X
62
4 AWG
45
54X
45
125/24
6TON42SS
6TON50XSS
15526
15110-CK
150/24
6TON45SS
6TON54XSS
62X
2 AWG
Pink
50H
15510X
1 AWG
Black
54H
62
2 AWG
6TON50SS
45
225/24
6TON54SS
15526
15510-CK
275/24
Purple
Orange
62X
1/0
325/24
6TON62XSS
2/0
450/24
45
62H
3/0
6TON62SS
4/0
6TON45SS
250 kcmil
4/0
Blue
Red
White
Ruby
Olive
Tan
6TON76SS
6TON71SS
6TON66SS
6TON60SS
6TON54SS
6TON50SS
76H
71H
66H
60H
54H
50H
15512
15514-CK
15534
15532-CK
15511
15530
76
71
66
60
54
50
15512X
15514X
15534X
76X
71X
66X
15512
15514-CK
15534
15532-CK
15511
15530
76
71
66
60
54
50
15512F
15514F
15534F
15532F
76
71
66
60
15512X
15514X
15534X
76X
71X
66X
15676X
15671X
15666X
15662X
76X
71X
66X
62X
6TON80SS
87H
80H
15506
15517
87H
80H
15506X
15517X
94X
87X
80X
15505
15536-CK
15506
15517
99H
94H
87H
80H
15505F
15661
15506F
15606
99H
94H
87H
80H
15536X
15506X
15517X
94X
87X
80X
15605X
15611X
15687X
15606X
99X
94X
87X
80X
3/0
2/0
1/0
650/24
300 kcmil
6TON87SS
15536X
66X
300 kcmil
775/24 (Long)
775/24 (Short)
Brown
94H
6TON66XSS
350 kcmil
350 kcmil
99H
925/24*
15505
15536-CK
106X
94H
107X
6TON94SS
15615X
Pink
15608X
Green
106H
400 kcmil
107H
500 kcmil
15608
15515F
115X
106H
15604X
15515-CK
1100/24
106H
1325/24**
107H
600 kcmil
15540
112H
15515-CK
115H
Black
15609
Orange
15504F
115H
Purple
125H
15504
Yellow
140H
115H
700 kcmil
15603
15504
750 kcmil
15602
650 kcmil
700 kcmil
195/24
N/A
150H
N/A
15601
800 kcmil 1000 kcmil
*Standard barrel only. Long barrel requires Brown 87H. **Standard barrel only. Long barrel requires Black 106H. † HEX-FLEX® Dies are sold separately in halves. The catalogue numbers shown in the chart above are for the upper half of the die. For the bottom half (the indenter), order one Cat. No. 6TONX for all 6TONX Series, one Cat. No. 15500X for 15500X Series Die Codes 21X-94X, and one Cat. No. 15600X for all 15600X Series Die Codes 62X-115X. ‡ These dies require adapter 15500-TB to be used in the TBM15CR-LI.
1000 kcmil
900 kcmil
800 kcmil
750 kcmil
500 kcmil
400 kcmil
1 AWG
Gold
550/24
Yellow
250 kcmil
COLOUR CODE
w w w . t n b . c a
Head Office Thomas & Betts Limited 700 Thomas Avenue Saint-Jean-sur-Richelieu, Quebec J2X 2M9 Tel.: (450) 347-5318 Fax: (450) 347-1976
Regional Sales Offices Atlantic Provinces Thomas & Betts Limited 106 Chain Lake Drive, Unit 2C Halifax, Nova Scotia B3S 1A8
Thomas & Betts catalogues:
Boxes and Covers / Meter Sockets
T&B® Cable Tray Systems
Wire Termination
Tel.: (902) 450-1307 Toll Free: 1-877-862-4357 Fax: (902) 450-1309 Quebec Thomas & Betts Limited 7900 Taschereau Boulevard Building D, Suite 108 Brossard, Quebec J4X 1C2 Tel.: (450) 466-1102 Toll Free: 1-800-465-1399 Fax: (450) 466-1163 Ontario Thomas & Betts Limited 2000 Argentia Road Plaza 5, Suite 500 Mississauga, Ontario L5N 2R7 Tel.: (905) 858-1010 Toll Free: 1-877-291-7771 Fax: (905) 858-1080
Power and High Voltage
Power Connections and Grounding
Industrial Lightning Fixtures
Metal Framing, Fastening and Identification
Fittings and Conduit Systems
Manitoba / Saskatchewan Thomas & Betts Limited 6531-148th Street, #1 Surrey, British Columbia V3S 3C5 Tel.: (604) 598-9811 Toll Free: 1-866-540-8220 Fax: (604) 598-9840 Alberta Thomas & Betts Limited 4836 Eleniak Road Edmonton, Alberta T6B 2S1 Tel.: (780) 424-7092 Toll Free: 1-888-664-5666 Fax: (780) 424-7093 Toll Free: 1-866-424-4082 British Columbia Thomas & Betts Limited 6531-148th Street, #1 Surrey, British Columbia V3S 3C5 Tel.: (604) 598-9811 Toll Free: 1-866-540-8220 Fax: (604) 598-9840
Thomas & Betts. Your best connection for innovative solutions.
© 2013. Thomas & Betts Limited. All rights reserved. Printed in Canada. 11/13/2500. Order No. LIBLKTOOLS-E
Thomas & Betts. Your best connection for innovative solutions.
Wire & Cable Management
•
Cable Protection Systems
•
Power Connection & Control
•
S a f e t y Te c h n o l o g y
Compression Tools
Lithium-Ion Battery-Powered Tools The Blackburn line of 6-ton to 15-ton compression and cutting tools is equipped with lithium-ion (Li) battery technology ®
• 14.4 V lithium-ion battery offers lighter weight, longer run time, no memory effect, minimal discharge and rapid recharge • Visual indication of complete crimp compression (green/orange/red)
• All tools and batteries come with a standard 5-year warranty • Covers a wide range of applications in both the electrical and utility markets
Li 6-Ton Open Crimp Tool
Li 6-Ton Closed Crimp Tool
• Designed for one-handed control ram advancement and retraction • Open yoke design with rotating head allows for maximum crimping flexibility • Protective rubber insulated boot on head • Rapid advance feature decreases crimp time • 14.4 V DC • Approx. 350 crimps per full charge (based on 3/0 cable)
• Designed for one-handed control ram advancement and retraction • Rotating head allows maximum flexibility for crimping • Rapid advance feature decreases crimp time • 14.4 V DC • Approx. 350 crimps per full charge (based on 3/0 cable)
Cat. No. TBM6PCR-LI
Dimensions (L x W x H) 13 in. x 2.5 in. x 12 in.
Capacity Cu #8-600 kcmil • Al #8-400 kcmil
Weight 8.5 lb. with battery Output 6 tons
Cat. No. TBM62PCR-LI
Dimensions (L x W x H) 13 in. x 2.5 in. x 12 in.
Capacity Cu #8-600 kcmil • Al #8-400 kcmil
Weight 8.5 lb. with battery Output 6 tons
Li 6-Ton Dieless Closed Crimp Tool
Li 6-Ton Dieless Open Crimp Tool
• Dieless tool with a 180° rotating head, uses one stationary and three movable indenting nibs, which close at 90° angles to each other so that the connector is squeezed equally at four strategic points • Crimps most connectors manufactured to ANSI C119.4 specification #6 – 750 kcmil • 14.4 V DC
• Dieless tool with a 180° rotating head, used to compress Homac®/Anderson® style lugs with 6 tons of force • Crimps most connectors manufactured to ANSI C119.4 specification #8 – 500 kcmil • 14.4 V DC
Cat. No. HMC5750-LI
Dimensions (L x W x H) 15 in. x 2.5 in. x 13 in.
Capacity Cu / Al #6-750 kcmil
www.tnb.ca
Weight 12.5 lb. with battery Output 6 tons
Cat. No. HMC5630-LI
Dimensions (L x W x H) 14 in. x 2.5 in. x 13 in.
Capacity Cu / Al #8-500 kcmil
Weight 11.5 lb. with battery Output 6 tons
Compression Tools Li Inline 6-Ton Open OD Crimp Tool
Li Inline 6-Ton Closed Crimp Tool
• Designed with a rotating 180° jaws and integrated LED work lights offering more maneuverability in tight spaces, while still providing 6 tons of scissor action crimping force • Designed for one-handed control ram advancement and retraction with a rapid advance feature which decreases crimp time • Accepts W-style dies • 14.4 V DC • Approx. 350 crimps per full charge (based on 3/0 cable)
• Designed with a rotating 180° head and integrated LED work lights offering more maneuverability in tight spaces, while still providing 6 tons of parallel action crimping force • Designed for one-handed control ram advancement and retraction with a rapid advance feature which decreases crimp time • Accepts W-style dies • 14.4 V DC • Approx. 350 crimps per full charge (based on 3/0 cable)
Cat. No. TBM6UCR-LI
Dimensions (L x W x H) 22 in. x 3.5 in. x 4.5 in.
Capacity Cu #8-300 kcmil • Al #8-4/0 kcmil
Cat. No. TBM62CR-LI
Weight 8.75 lb. with battery
Dimensions (L x W x H) 18 in. x 3.5 in. x 4.5 in.
Capacity Cu #8-600 kcmil • Al #8-400 kcmil
Output 6 tons
Output 6 tons
Li Inline 6-Ton Open Die Crimp Tool
Li 12-Ton Open Crimp Tool
• Designed with a rotating 180° jaws and integrated LED work lights offering more maneuverability in tight spaces, while still providing 6 tons of scissor action crimping force • Designed for one-handed control ram advancement and retraction with a rapid advance feature which decreases crimp time • Accepts W-style dies • 14.4 V DC • Approx. 500 crimps per full charge (based on 3/0 cable)
• Designed for one-handed control ram advancement and retraction • Rotating head allows maximum flexibility for crimping and a protective rubber boot on «C» head • Rapid advance feature decreases crimp time • 14.4 V DC • Approx. 150 crimps per full charge (based on 3/0 cable)
Cat. No. TBM6UNICR-LI
Dimensions (L x W x H) 20 in. x 3.5 in. x 4.5 in.
Capacity Cu #8-500 kcmil • Al #8-350 kcmil
Weight 8.75 lb. with battery Output 6 tons
Cat. No. TBM12PCR-LI
Dimensions (L x W x H) 16.5 in. x 3.3 in. x 12.6 in.
Weight 16.8 lb. with battery
Capacity Cu / Al #8-750 kcmil
Output 12 tons
Li 14-Ton Open Crimp Tool
Li 15-Ton Closed Crimp Tool
• Installs up to 900 kcmil copper lugs and splices and up to 750 kcmil aluminum lugs and splices • Rotating head allows maximum flexibility for crimping and a protective rubber boot on «C» head • Rapid advance feature decreases crimp time • 14.4 V DC • Approx. 150 crimps per full charge (based on 3/0 cable)
• Installs up to 1500 kcmil copper lugs and splices and up to 1250 kcmil aluminum lugs and splices • Rotating head allows maximum flexibility for crimping and a protective rubber boot • Rapid advance feature decreases crimp time • 14.4 V DC • Approx. 150 crimps per full charge (based on 3/0 cable)
Cat. No. TBM14CR-LI
Weight 8.75 lb. with battery
Dimensions (L x W x H) 19 in. x 3.5 in. x 10.5 in.
Capacity Cu #8-900 kcmil • Al #10-750 kcmil
www.tnb.ca
Weight 20 lb. with battery Output 14 tons
Cat. No. TBM15CR-LI
Dimensions (L x W x H) 21.5 in. x 3.5 in. x 10.5 in.
Capacity Cu #8-1500 kcmil • Al #10-1250 kcmil
Weight 24 lb. with battery Output 15 tons
Cutting Tools Li Cutter for 750 kcmil Cu, 636 kcmil ACSR • Designed for one-handed control of blade advancement and retraction • Cuts up to 750 kcmil copper, 2-1/8 in. O.D. aluminum and 636 kcmil ACSR • 14.4 V DC
Li Battery • Standard battery platforms across all new Li-ion tools • Provides more crimps per charge than standard Ni-MH batteries • Lithium-ion battery
Cat. No. 144-BAT-LI Cat. No. TBM54CTS-LI
Dimensions (L x W x H) 16 in. x 4.5 in. x 5 in.
Weight 5.8 lb. with battery
Dimensions (L x W x H) 4.2 in. x 3.3 in. x 2.6 in.
Capacity 30 Ah
Weight 1.2 lb.
Output 14.4 V DC
Output N/A Capacity
Cu 750 kcmil • Al 1500 kcmil • ACSR 636 kcmil
• Converts older TBM series battery tools with poke-in style battery to the new Li-ion battery platform, allowing for higher productivity as batteries are interchangeable across the Li-ion tools.
Li Cutter for Up to 1500 kcmil Al • Designed for one-handed control of blade advancement and retraction • Cuts up to 1000 kcmil copper and 1500 kcmil aluminum (not for use on ACSR) • 14.4 V DC
Cat. No. TBM54CT-LI
Dimensions (L x W x H) 16 in. x 4.5 in. x 5 in.
Weight 5.8 lb. with battery
Adapter for Li Battery
Output N/A Capacity
Cat. No. 144-ADP-LI
Dimensions (L x W x H) N/A
Capacity N/A
Weight N/A
Output N/A
Li Battery Charger • Charger works across the standard battery platform for all new Li-ion tools
Cu 1000 kcmil • Al 1500 kcmil • ACSR – Do not cut Cat. No. 144-CHR-LI
Li Cutter for Steel, ACSR, Al, Cu •D esigned for one-handed control of blade advancement and retraction with a rotating head to allow maximum flexibility for cutting • F eatures a two-stage rapid advance ram for reduced cycles with overload bypass protection, which will pop off if the material is beyond the cutter’s capacity • Cuts up to 1-1/2 in. O.D. copper, aluminum and ACSR cable • C uts rebar, ground rod up to 5/8 in. and wire rope up to 3/4 in. • 14.4 V DC Cat. No. TBM58PCTS-LI
Dimensions (L x W x H) 17.5 in. x 2.5 in. x 13 in.
Capacity Wire rope 3/4 in., Rebar 5/8 in., Ground Rod 5/8 in., ACSR 1-1/2 in., Cu / Al cable 1-1/2
www.tnb.ca
Dimensions (L x W x H) 9 in. x 5.7 in. x 3.2 in.
Input Voltage 100 – 240 V AC 50/60 Hz
Weight 3.5 lb.
Output 10.8 – 14.4 V DC 7A 28.8 V DC 3A
Interchangeable Cutting Head • For all TBM6 Series battery operated tools
Weight 14.6 lb. with battery Output N/A
Cat. No. 61520CAT
Description Interchangeable Cutting Head for TBM6 Tools
Tools and Dies
15522
15520
29
24
21
Die Code No.
15527X
15522X
15520X
Hex-Flex Die Cat. No.†
29X
24X
21X
Hex-Flex Die Code No.
15513-CK
15528
15527-CK
15522
15520
37
33
29
24
21
15513F
15528F
15527F
15522F
15520F
Full Die Cat. No.
37
33
29
24
21
Full Die, Die Code No.
15513X
15528X
15527X
15522X
15520X
Hex-Flex Die Cat. No.† ‡
37X
33X
29X
24X
TBM15CR-LI
21X
Hex-Flex Die Code No.
15527-CK
33X
TBM12PCR-LI, TBM14CR-LI
Hex-Flex Die Cat. No. 24X
37X
Die Code No.
6TON21XSS
29X
15528X
Die Cat. No. ‡
Die Code No.
6TON24XSS
15513X
45X
42X
15526
15508
54
50
45
42
15511F
15530F
15526F
15508F
54
50
45
42
15511X
15530X
15526X
15508X
54X
50X
45X
42X
21X
15508X
15530
Die Cat. No.
21
6TON29XSS 33
15526X
15511
Die Cat. No.
Aluminum
24
37
TBM6PCR-LI, TBM62PCR-LI, TBM62CR-LI, TBM6UNICR-LI
Dies for Standard Lugs and Splices
Flex/24 6TON21SS
29 15528
CONNECTOR SIZE Code Copper Red 6TON24SS
15513-CK
Hex-Flex Hex-Flex Hex-Flex Die Code Full Die Full Die No. Cat. No. † Code No.
10 AWG
6TON29SS 33X
42
50X
37/24
Blue
37X
45
54X
8 AWG
Grey 6TON33XSS
15508
15530X
8 AWG
6TON37XSS
15526
15511X
6 AWG 33
42X
50
62X
61/24
37
45X
54
15510X
91/24 6TON33SS
6TON42XSS
15530
62
6 AWG
6TON37SS
6TON45XSS
15511
15510F
4 AWG
Green
Brown
42
50X
62
4 AWG
45
54X
45
125/24
6TON42SS
6TON50XSS
15526
15110-CK
150/24
6TON45SS
6TON54XSS
62X
2 AWG
Pink
50H
15510X
1 AWG
Black
54H
62
2 AWG
6TON50SS
45
225/24
6TON54SS
15526
15510-CK
275/24
Purple
Orange
62X
1/0
325/24
6TON62XSS
2/0
450/24
45
62H
3/0
6TON62SS
4/0
6TON45SS
250 kcmil
4/0
Blue
Red
White
Ruby
Olive
Tan
6TON76SS
6TON71SS
6TON66SS
6TON60SS
6TON54SS
6TON50SS
76H
71H
66H
60H
54H
50H
15512
15514-CK
15534
15532-CK
15511
15530
76
71
66
60
54
50
15512X
15514X
15534X
76X
71X
66X
15512
15514-CK
15534
15532-CK
15511
15530
76
71
66
60
54
50
15512F
15514F
15534F
15532F
76
71
66
60
15512X
15514X
15534X
76X
71X
66X
15676X
15671X
15666X
15662X
76X
71X
66X
62X
6TON80SS
87H
80H
15506
15517
87H
80H
15506X
15517X
94X
87X
80X
15505
15536-CK
15506
15517
99H
94H
87H
80H
15505F
15661
15506F
15606
99H
94H
87H
80H
15536X
15506X
15517X
94X
87X
80X
15605X
15611X
15687X
15606X
99X
94X
87X
80X
3/0
2/0
1/0
650/24
300 kcmil
6TON87SS
15536X
66X
300 kcmil
775/24 (Long)
775/24 (Short)
Brown
94H
6TON66XSS
350 kcmil
350 kcmil
99H
925/24*
15505
15536-CK
106X
94H
107X
6TON94SS
15615X
Pink
15608X
Green
106H
400 kcmil
107H
500 kcmil
15608
15515F
115X
106H
15604X
15515-CK
1100/24
106H
1325/24**
107H
600 kcmil
15540
112H
15515-CK
115H
Black
15609
Orange
15504F
115H
Purple
125H
15504
Yellow
140H
115H
700 kcmil
15603
15504
750 kcmil
15602
650 kcmil
700 kcmil
195/24
N/A
150H
N/A
15601
800 kcmil 1000 kcmil
*Standard barrel only. Long barrel requires Brown 87H. **Standard barrel only. Long barrel requires Black 106H. † HEX-FLEX® Dies are sold separately in halves. The catalogue numbers shown in the chart above are for the upper half of the die. For the bottom half (the indenter), order one Cat. No. 6TONX for all 6TONX Series, one Cat. No. 15500X for 15500X Series Die Codes 21X-94X, and one Cat. No. 15600X for all 15600X Series Die Codes 62X-115X. ‡ These dies require adapter 15500-TB to be used in the TBM15CR-LI.
1000 kcmil
900 kcmil
800 kcmil
750 kcmil
500 kcmil
400 kcmil
1 AWG
Gold
550/24
Yellow
250 kcmil
COLOUR CODE
w w w . t n b . c a
Head Office Thomas & Betts Limited 700 Thomas Avenue Saint-Jean-sur-Richelieu, Quebec J2X 2M9 Tel.: (450) 347-5318 Fax: (450) 347-1976
Regional Sales Offices Atlantic Provinces Thomas & Betts Limited 106 Chain Lake Drive, Unit 2C Halifax, Nova Scotia B3S 1A8
Thomas & Betts catalogues:
Boxes and Covers / Meter Sockets
T&B® Cable Tray Systems
Wire Termination
Tel.: (902) 450-1307 Toll Free: 1-877-862-4357 Fax: (902) 450-1309 Quebec Thomas & Betts Limited 7900 Taschereau Boulevard Building D, Suite 108 Brossard, Quebec J4X 1C2 Tel.: (450) 466-1102 Toll Free: 1-800-465-1399 Fax: (450) 466-1163 Ontario Thomas & Betts Limited 2000 Argentia Road Plaza 5, Suite 500 Mississauga, Ontario L5N 2R7 Tel.: (905) 858-1010 Toll Free: 1-877-291-7771 Fax: (905) 858-1080
Power and High Voltage
Power Connections and Grounding
Industrial Lightning Fixtures
Metal Framing, Fastening and Identification
Fittings and Conduit Systems
Manitoba / Saskatchewan Thomas & Betts Limited 6531-148th Street, #1 Surrey, British Columbia V3S 3C5 Tel.: (604) 598-9811 Toll Free: 1-866-540-8220 Fax: (604) 598-9840 Alberta Thomas & Betts Limited 4836 Eleniak Road Edmonton, Alberta T6B 2S1 Tel.: (780) 424-7092 Toll Free: 1-888-664-5666 Fax: (780) 424-7093 Toll Free: 1-866-424-4082 British Columbia Thomas & Betts Limited 6531-148th Street, #1 Surrey, British Columbia V3S 3C5 Tel.: (604) 598-9811 Toll Free: 1-866-540-8220 Fax: (604) 598-9840
Thomas & Betts. Your best connection for innovative solutions.
© 2013. Thomas & Betts Limited. All rights reserved. Printed in Canada. 11/13/2500. Order No. LIBLKTOOLS-E
