LPC 1200 Version History

Report 5 Downloads 79 Views

Oct 23, 2017 - The inability of accessing live view over the network when UPnP function is enabled on the cameras over a period of time. •. Changes in Daylight savings time not kept when the camera is connected to GV-ASManager. •. Endless loop of rebooting caused by Auto Reboot Setup. •. GV-LPR1200 unable to ...

Contents Firmware V2.00 2017-10-27 ............................................................................................................ 2 Firmware V1.13 2017-09-19 ............................................................................................................ 3 Firmware V1.12 2017-08-18 ............................................................................................................ 4 Firmware V1.10 2016-06-04 ............................................................................................................ 5

Version History

1

12/4/2017

GV-LPR / LPC 1200 Version History Firmware V2.00 2017-10-27 New: •

“Parking (I/O) 2” option added to Detection Mode to avoid multiple recognition results from triggering the related output repeatedly



Support for GV-RU9003 UHF RFID eTag reader



Support for triggering the Output 2 on the camera as soon as the parking lot is full

Fixed: •

Incorrect character recognition setting of Polish recognition engine.

Version History

2

12/4/2017

Firmware V1.13 2017-09-19 Fixed: •

The inability to zoom in/out continuously when holding down the zoom in/out button



Chance of repeated reboot over a period of time

Version History

3

12/4/2017

Firmware V1.12 2017-08-18 Fixed: •

The inability of accessing live view over the network when UPnP function is enabled on the cameras over a period of time



Changes in Daylight savings time not kept when the camera is connected to GV-ASManager



Endless loop of rebooting caused by Auto Reboot Setup



GV-LPR1200 unable to access license plate logs from its standalone database



Rare chance of Web Interface failure when the Zoom In button under Camera Adjustment is repeatedly pushed

Version History

4

12/4/2017

Firmware V1.10 2016-06-04 New: •

Additional alarm output trigger on GV-LPR1200 by LPR events when connecting to ASManager V4.4.0.0



Registering license plates directly on GV-LPR1200 through a web browser on standalone-database mode



Wide Dynamic Range (WDR) and WDR schedule for a specific time frame

Version History

5

12/4/2017

Recommend Documents
just follow the steps above and reconnect the wires. 1) Find a suitable location to surface mount install the camera. Make sure the camera's view is unobstructed ...

Feb 6, 2015 - Double USB A-type female connector (90-degree bend pins). GXK-12USB. VBUS1. 1. 1D-. 3. 1D+. 5. GND1. 7. VUSB2. 2. 2D-. 4. 2D+. 6. GND2.

Feb 24, 2016 - TED SMITH. FAMILY. FOOTBALL. CENTER. LL. MM. KK. JJ. II. HH. NN. OO. PP. PRESS BOX. PRESIDENT'S. SUITE. STADIUM. CLUB. U4.

Adjustable Fan Speed. Sleek, Compact Design. 4 Port USB 2.0 Hub. Build-In Cable Storage. LPC-301. ( With USB Hub ). LPC-305. PRODUCT DESCRIPTION.

List of Cities for Default Seismic and Wind Data . ..... Saving Settings as Default and Restoring Original Settings. ..... The program used to revert to the Dead load type each time you added a new load. Now it uses .... For this reason, and because

GV-I/O Box 8 / 16 Ports Version History. Firmware V1.21 2018-02-07. New: •. Support for firmware update using GV-IP Device Utility when updating from V1.21 ...

Design Values in Output for Custom Multi-ply Members (Bug 2859). In reporting some .... of custom sections. 11. Auto-eccentricity Application (Change 153).

Feb 5, 2018 - For imperial units, if the distance is greater than 100 feet, and for metric, 30 metres, the building is considered susceptible. b) Warning Message. If the condition is detected, a Yes, No, Cancel message box asks you whether you want t

Mar 26, 2018 - Failure to load live view when entering the single live view page, even though the recording and audio functions are working properly (for iOS ...

Feb 5, 2018 - Update of Span Length and Column Height after Unit Change (Bug 3118). Starting with version 9.3, after changing unit system between metric and imperial in either direction, the program did not immediately update the following inputs to