luxor fp2000 adjustable tv cart assembly
Flat Panel Series Mobile Stand Instructions
TYPE1
Stationary Mount Base Model
TYPE3
Stationary Mount + Shelf + Camera Mount
09/23/13
TYPE2
Stationary Mount + Shelf
TYPE4
Rotating Mount + Shelf
Table of Contents
Table of Contents and Warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Part List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Assembly and Installation
Adjust upper and lower poles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Attaching to the base assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Install steel cross rods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Height adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Media shelf assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Assemble flat panel mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9 Install mount to the frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Install camera mount. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Cable and wire installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 VESA mounting patterns. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Tools Required
-- Phillips Screwdriver -- Wrench
WARNING! Severe personal injury and property damage can result from improper installation. Read instructions carefully before beginning. • • • • • •
If you do not understand the instructions or have any concerns please contact a qualified local installer. Do not install or assemble if the product or hardware is damaged or missing, if you require replacement parts contact your local dealer. This product fits most 40˝- 60˝ flat panel displays; maximum weight for the display is 100 lbs. / 45.5kg. Do not use this product for anything other than what it was originally designed. This product contains moving parts, please use caution. The manufacturer disclaims any liability for the modifications, improper installation and installation exceeding maximum weight capacity. The manufacturer will not be liable for any damages arising out of the use of, or inability to use the product.
2 / 12
Part List A1 x1
B2 x2
B2 x2
B1 x1
B1 x1
A2 x4 B3 x2 A3 x4
B5 x2*
(B3 is preinstalled)
A4 x1 B4 x4 TYPE1, TYPE2, TYPE3
*1 is pre-installed
C5 x4 C4 x4 C3 x4 C2 x2
C1 x1
C3 x2
D x2
R3 x1
only: TYPE2, TYPE3, TYPE4
S2 x1 S1 x1
R1 x1
only: TYPE3
M8x25mm
M6x25mm
M5x25mm
G x4
H x4
J x4
M8x20mm
K x4
B5 x2
TYPE4
C1 x1 C2 x2
R2 x1
TYPE4
TYPE1, TYPE2, TYPE3
M5x10mm
F x4
M6x10mm
N x2 T x8
only: TYPE3
E x4
P x2 L x1
only: TYPE1, only: TYPE3 TYPE2, TYPE3
only: TYPE2, TYPE3, TYPE4
M x1 3 / 12
1 1 2 3
Adjust upper and lower poles Locate the spring plungers inside the bottom grommet hole of pole B1 (If your unit has B5 cross bar pre-installed remove prior). Starting with the right side pole B2, push the spring plunger down and pull B2 up slightly and twist it slightly so that the spring plunger remains offset. This will make adjusting the pole easier. (figure 1) Hold the poles B1 & B2 with your hands and use your left foot on the cross bridge of B1 for stability. Pull B2 upward until you reach your desired height. Twist B2 so that the spring plunger locks into the nearest spring plunger hole. (figure 2) Repeat the same steps for the left side pole B2 but use your right foot for stability instead. Align poles B2 and lock the spring plunger into place. (figure 3)
Only for TYPE1, TYPE2, TYPE3 Remove B5 B5 before step 1.
B2
B2
B2
B2
B3 is pre-installed
B1 B1 Spring plunger
B1
Spring plunger
figure 1 4 / 12
figure 2
figure 3
Lift pole assembly so that the part remains upright and the cable management holes are facing toward you.
2
Attaching to the base assembly
1
Thread casters A2 and washer A3 into the bottom of base A1. Make sure all casters are locked to prevent movement during installation.
2
With allen wrench M attach lower poles B1 to base A1 with screw K. First through the bottom of base A1, then through the top of base A.
3
After screws K are firmly fastened, push down the screw cover A4 until it locks into place.
2 cable management holes facing back
K
B1
2
1
K
3
A1 A3 A3
A3
A2
A2 A2
A2
1
M
A3
Tighten Fully with wrench Lock Casters before assembly
B1
A4 A1
5 / 12
3
Install steel cross rods B5 B5
1
B5 B2
B5
Phillips screwdriver
3 Refasten rods B5 with screws.
Remove the pre-installed screws on rod B5. Making sure the upper poles B2 are aligned, slide rods B5 into the top openings.
4
Height adjustment
Assistance Required Cables Unplugged
461⁄2˝ - 621⁄2˝ H / 1050mm - 1500mm
B4
B4
6 / 12
2
B4
B4
Slide the upper poles B2 up or down to the different spring plunger holes for your desired height. Install grommet covers B4 into the grommet holes.
Press and hold both spring plungers to slide the upper poles B2.
5
Media shelf assembly (TYPE2, TYPE3, TYPE4) Before assembly make sure there is enough clearance for the flat panel display
1
Remove the pre-installed screws on bracket R2. Align bracket R2 to desired position and clamp R2 then retighten the long screws.
L
R2
2
1 B1
Phillips screwdriver
3
2 R1
1
R3 R3
R2
2 Phillips screwdriver
Using the short screws fasten bracket R2 to support R3.
With allen wrench L and the short allen screws fasten shelf R1 to support R3.
7 / 12
6a
Assemble flat panel mount (TYPE4)
VESA: 200x400 - 400x400mm
1
2
C1
1. C3
3. C4 C2
C2
2. C2
C1
4. C5 Phillips screwdriver
Top of Display
3
For a selection of mounting positions refer to page 12
C2
C2
F E
Display not included
First unscrew and remove the vertical supports C2 from mount C1. Align the screw threads C3 to the desired vertical support position of C2. Screw support C2 into C1 and C3. Insert support stoppers C4 followed by caps C5.
G, H, J
Carefully attach mount to display using screws G,H or J. Through washer E, support C2 and spacer F. Phillips screwdriver VESA: 400x600 - 500x800mm M5x25mm (H) M6x25mm (J)
M8x25mm (G) G F
G F
E F
H,J
H,J E
F
8 / 12
Safety Precautions
Plastic spacers must be used to avoid any damage from screws
Adjusting the mount (TYPE4) - After Step 7 Remove pre-installed screws
Re-attach screws
C1
C1
Phillips screwdriver
Phillips screwdriver
Swivel 90°
6b Assemble flat panel mount (TYPE1, TYPE2, TYPE3) VESA: 200x200mm
F E
E F
Phillips screwdriver
H, J
M5x25mm (H) M6x25mm (J) H,J
VESA: 200x200 - 600x400mm
T
T
H,J
E F
Safety Precautions
F E
H, J
9 / 12
7
Install mount to frame
1
2
Lift up lock hook before installing mount
C1
Make sure casters are locked prior to installation
3
4
Secure lock hook fully
Heavy Lifting: Assistance Required Attach hooks on C1 onto cross rods B5
C1
10 / 12
B5
Lock not included
8
Install camera mount (TYPE3)
S1
Adjustable height
S2 P
9
N
Phillips screwdriver
Cable and wire Installation Please use care when inserting the wires and cables into the grommet to avoid damage
For indoor use only. Avoid excessive wind, heat & humidity. 11 / 12
10
VESA mounting patterns
09/23/13 Slide vertical support rails to find the best assembly position for your display.
D For 200x200mm VESA mounting position use brackets D. 12 / 12
TYPE1
Stationary Mount Base Model
TYPE3
Stationary Mount + Shelf + Camera Mount
09/23/13
TYPE2
Stationary Mount + Shelf
TYPE4
Rotating Mount + Shelf
Table of Contents
Table of Contents and Warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Part List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Assembly and Installation
Adjust upper and lower poles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Attaching to the base assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Install steel cross rods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Height adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Media shelf assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Assemble flat panel mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9 Install mount to the frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Install camera mount. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Cable and wire installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 VESA mounting patterns. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Tools Required
-- Phillips Screwdriver -- Wrench
WARNING! Severe personal injury and property damage can result from improper installation. Read instructions carefully before beginning. • • • • • •
If you do not understand the instructions or have any concerns please contact a qualified local installer. Do not install or assemble if the product or hardware is damaged or missing, if you require replacement parts contact your local dealer. This product fits most 40˝- 60˝ flat panel displays; maximum weight for the display is 100 lbs. / 45.5kg. Do not use this product for anything other than what it was originally designed. This product contains moving parts, please use caution. The manufacturer disclaims any liability for the modifications, improper installation and installation exceeding maximum weight capacity. The manufacturer will not be liable for any damages arising out of the use of, or inability to use the product.
2 / 12
Part List A1 x1
B2 x2
B2 x2
B1 x1
B1 x1
A2 x4 B3 x2 A3 x4
B5 x2*
(B3 is preinstalled)
A4 x1 B4 x4 TYPE1, TYPE2, TYPE3
*1 is pre-installed
C5 x4 C4 x4 C3 x4 C2 x2
C1 x1
C3 x2
D x2
R3 x1
only: TYPE2, TYPE3, TYPE4
S2 x1 S1 x1
R1 x1
only: TYPE3
M8x25mm
M6x25mm
M5x25mm
G x4
H x4
J x4
M8x20mm
K x4
B5 x2
TYPE4
C1 x1 C2 x2
R2 x1
TYPE4
TYPE1, TYPE2, TYPE3
M5x10mm
F x4
M6x10mm
N x2 T x8
only: TYPE3
E x4
P x2 L x1
only: TYPE1, only: TYPE3 TYPE2, TYPE3
only: TYPE2, TYPE3, TYPE4
M x1 3 / 12
1 1 2 3
Adjust upper and lower poles Locate the spring plungers inside the bottom grommet hole of pole B1 (If your unit has B5 cross bar pre-installed remove prior). Starting with the right side pole B2, push the spring plunger down and pull B2 up slightly and twist it slightly so that the spring plunger remains offset. This will make adjusting the pole easier. (figure 1) Hold the poles B1 & B2 with your hands and use your left foot on the cross bridge of B1 for stability. Pull B2 upward until you reach your desired height. Twist B2 so that the spring plunger locks into the nearest spring plunger hole. (figure 2) Repeat the same steps for the left side pole B2 but use your right foot for stability instead. Align poles B2 and lock the spring plunger into place. (figure 3)
Only for TYPE1, TYPE2, TYPE3 Remove B5 B5 before step 1.
B2
B2
B2
B2
B3 is pre-installed
B1 B1 Spring plunger
B1
Spring plunger
figure 1 4 / 12
figure 2
figure 3
Lift pole assembly so that the part remains upright and the cable management holes are facing toward you.
2
Attaching to the base assembly
1
Thread casters A2 and washer A3 into the bottom of base A1. Make sure all casters are locked to prevent movement during installation.
2
With allen wrench M attach lower poles B1 to base A1 with screw K. First through the bottom of base A1, then through the top of base A.
3
After screws K are firmly fastened, push down the screw cover A4 until it locks into place.
2 cable management holes facing back
K
B1
2
1
K
3
A1 A3 A3
A3
A2
A2 A2
A2
1
M
A3
Tighten Fully with wrench Lock Casters before assembly
B1
A4 A1
5 / 12
3
Install steel cross rods B5 B5
1
B5 B2
B5
Phillips screwdriver
3 Refasten rods B5 with screws.
Remove the pre-installed screws on rod B5. Making sure the upper poles B2 are aligned, slide rods B5 into the top openings.
4
Height adjustment
Assistance Required Cables Unplugged
461⁄2˝ - 621⁄2˝ H / 1050mm - 1500mm
B4
B4
6 / 12
2
B4
B4
Slide the upper poles B2 up or down to the different spring plunger holes for your desired height. Install grommet covers B4 into the grommet holes.
Press and hold both spring plungers to slide the upper poles B2.
5
Media shelf assembly (TYPE2, TYPE3, TYPE4) Before assembly make sure there is enough clearance for the flat panel display
1
Remove the pre-installed screws on bracket R2. Align bracket R2 to desired position and clamp R2 then retighten the long screws.
L
R2
2
1 B1
Phillips screwdriver
3
2 R1
1
R3 R3
R2
2 Phillips screwdriver
Using the short screws fasten bracket R2 to support R3.
With allen wrench L and the short allen screws fasten shelf R1 to support R3.
7 / 12
6a
Assemble flat panel mount (TYPE4)
VESA: 200x400 - 400x400mm
1
2
C1
1. C3
3. C4 C2
C2
2. C2
C1
4. C5 Phillips screwdriver
Top of Display
3
For a selection of mounting positions refer to page 12
C2
C2
F E
Display not included
First unscrew and remove the vertical supports C2 from mount C1. Align the screw threads C3 to the desired vertical support position of C2. Screw support C2 into C1 and C3. Insert support stoppers C4 followed by caps C5.
G, H, J
Carefully attach mount to display using screws G,H or J. Through washer E, support C2 and spacer F. Phillips screwdriver VESA: 400x600 - 500x800mm M5x25mm (H) M6x25mm (J)
M8x25mm (G) G F
G F
E F
H,J
H,J E
F
8 / 12
Safety Precautions
Plastic spacers must be used to avoid any damage from screws
Adjusting the mount (TYPE4) - After Step 7 Remove pre-installed screws
Re-attach screws
C1
C1
Phillips screwdriver
Phillips screwdriver
Swivel 90°
6b Assemble flat panel mount (TYPE1, TYPE2, TYPE3) VESA: 200x200mm
F E
E F
Phillips screwdriver
H, J
M5x25mm (H) M6x25mm (J) H,J
VESA: 200x200 - 600x400mm
T
T
H,J
E F
Safety Precautions
F E
H, J
9 / 12
7
Install mount to frame
1
2
Lift up lock hook before installing mount
C1
Make sure casters are locked prior to installation
3
4
Secure lock hook fully
Heavy Lifting: Assistance Required Attach hooks on C1 onto cross rods B5
C1
10 / 12
B5
Lock not included
8
Install camera mount (TYPE3)
S1
Adjustable height
S2 P
9
N
Phillips screwdriver
Cable and wire Installation Please use care when inserting the wires and cables into the grommet to avoid damage
For indoor use only. Avoid excessive wind, heat & humidity. 11 / 12
10
VESA mounting patterns
09/23/13 Slide vertical support rails to find the best assembly position for your display.
D For 200x200mm VESA mounting position use brackets D. 12 / 12
