m-250a2 powr/door® luminaire with cutoff optics
M-250 ROADWAY LIGHTING
M-250A2 POWR/DOOR ® LUMINAIRE WITH CUTOFF OPTICS APPLICATIONS • For residential streets, access roads, parking lots where light trespass could be a problem SPECIFICATION FEATURES • Powr/Module ballast assembly • Filtered optics • Universal two-bolt slipfitter • Die-cast aluminum housing with electrocoat gray paint finish • Adjustable mogul base socket (street side) – E39 standard • ALGLAS® finish on reflector • No-tool PE receptacle • Plug-in ignitor
• True 90° cutoff—no light above 90° (meets RP8-2000 for full cutoff) • External stainless steel bail latch • CSA Certified unit available, contact factory • Standard construction is IP55 • Plastic Pest guard standard (not required for 2 in. pipe)
ORDERING NUMBER LOGIC M2AC PRODUCT IDENT XXXX M2AC = M-250A2 with Cutoff Optics
15 WATTAGE XX 05 = 50 07 = 70 10 = 100 15 = 150 (55V) 17 = 175 20 = 200 21 = 100/150 (55V) 25 = 250 71 = 70/100 NOTE: Dual wattage connected for lower wattage
S LIGHT SOURCE X S = HPS M = MH C = Merc Standard: Lamp not included.
1 VOLTAGE X 60Hz 0 = 120/208/ 240/277 Multivolt 1 = 120 2 = 208 3 = 240 4 = 277 5 = 480 7 = 120X240 8 = 240V Ballast 120V PE Receptacle not reconnectable D = 347 F = 120X347 T = 220 50Hz 6 = 220 R = 230 Y = 240 NOTE: Dual voltage connected for lower voltage
N
G
2
BALLAST TYPE X See Ballast Selection Table A = Autoreg C = Merc-Reg G = Mag-Reg with Grounded Socket Shell H = HPF Reactor or Lag M = Mag-Reg N = NPF Reactor or Lag P = CWI with Grounded Socket Shell S = Series (in Top Housing)
PE FUNCTION LENS TYPE X 1 = None 2 = PE Receptacle NOTE: Receptacle connected same voltage as unit except as noted. Order PE Control separately.
F
MC3
1
IES DISTRIBUTION TYPE XXX See Photometric Selection Table
FILTER
OPTIONS
X 1 = Fiber gasket 2 = Char-coal with elastomer gasket
XXX F = Fusing (Not available with multivolt or dual voltage) J = Line Surge Protector, Expulsion Type U = UL Listed (Up to 250W HPS only and 175W MH max) Glass refractor and 60Hz only
X See Photometric Selection Table A = Acrylic Clear Globe S = Short G = Glass M = Medium L = Polycarbonate Clear Globe C = Cutoff NOTE: 2 = Type II 150 watt Maximum 3 = Type III with Acrylic or Polycarbonate Clear Globes.
PHOTOMETRIC SELECTION TABLE
Light Source Lens Type HPS Clear globe, Acrylic or Polycarbonate 50, 70, 100, 150 (55V) HPS Glass, flat 200, 250 HPS Glass, flat 175, 250 MH Glass, flat 100, 175, 250 Merc NOTE: N/A=Not Available *Meets RP8-2000 for full cutoff Wattage 50, 70, 100, 150 (55V)
R-4/2001
IES Distribution Type Photometric Curve Number 35-17---(Socket Position) All light sources are clear unless otherwise indicated. MC2* MC3* SC2* N/A 7287 (1A) N/A 7286 (2CL) 7285 (1CL) 7303 (2DH) 7304 (1DH) N/A N/A
N/A N/A 7299 (1B)
GE Lighting Systems, Inc. www.gelightingsystems.com
® Registered Trademark of General Electric Company ™ Trademark of General Electric Company Data subject to change without notice
M-250A2 POWR/DOOR ® LUMINAIRE WITH CUTOFF OPTICS APPLICATIONS • For residential streets, access roads, parking lots where light trespass could be a problem SPECIFICATION FEATURES • Powr/Module ballast assembly • Filtered optics • Universal two-bolt slipfitter • Die-cast aluminum housing with electrocoat gray paint finish • Adjustable mogul base socket (street side) – E39 standard • ALGLAS® finish on reflector • No-tool PE receptacle • Plug-in ignitor
• True 90° cutoff—no light above 90° (meets RP8-2000 for full cutoff) • External stainless steel bail latch • CSA Certified unit available, contact factory • Standard construction is IP55 • Plastic Pest guard standard (not required for 2 in. pipe)
ORDERING NUMBER LOGIC M2AC PRODUCT IDENT XXXX M2AC = M-250A2 with Cutoff Optics
15 WATTAGE XX 05 = 50 07 = 70 10 = 100 15 = 150 (55V) 17 = 175 20 = 200 21 = 100/150 (55V) 25 = 250 71 = 70/100 NOTE: Dual wattage connected for lower wattage
S LIGHT SOURCE X S = HPS M = MH C = Merc Standard: Lamp not included.
1 VOLTAGE X 60Hz 0 = 120/208/ 240/277 Multivolt 1 = 120 2 = 208 3 = 240 4 = 277 5 = 480 7 = 120X240 8 = 240V Ballast 120V PE Receptacle not reconnectable D = 347 F = 120X347 T = 220 50Hz 6 = 220 R = 230 Y = 240 NOTE: Dual voltage connected for lower voltage
N
G
2
BALLAST TYPE X See Ballast Selection Table A = Autoreg C = Merc-Reg G = Mag-Reg with Grounded Socket Shell H = HPF Reactor or Lag M = Mag-Reg N = NPF Reactor or Lag P = CWI with Grounded Socket Shell S = Series (in Top Housing)
PE FUNCTION LENS TYPE X 1 = None 2 = PE Receptacle NOTE: Receptacle connected same voltage as unit except as noted. Order PE Control separately.
F
MC3
1
IES DISTRIBUTION TYPE XXX See Photometric Selection Table
FILTER
OPTIONS
X 1 = Fiber gasket 2 = Char-coal with elastomer gasket
XXX F = Fusing (Not available with multivolt or dual voltage) J = Line Surge Protector, Expulsion Type U = UL Listed (Up to 250W HPS only and 175W MH max) Glass refractor and 60Hz only
X See Photometric Selection Table A = Acrylic Clear Globe S = Short G = Glass M = Medium L = Polycarbonate Clear Globe C = Cutoff NOTE: 2 = Type II 150 watt Maximum 3 = Type III with Acrylic or Polycarbonate Clear Globes.
PHOTOMETRIC SELECTION TABLE
Light Source Lens Type HPS Clear globe, Acrylic or Polycarbonate 50, 70, 100, 150 (55V) HPS Glass, flat 200, 250 HPS Glass, flat 175, 250 MH Glass, flat 100, 175, 250 Merc NOTE: N/A=Not Available *Meets RP8-2000 for full cutoff Wattage 50, 70, 100, 150 (55V)
R-4/2001
IES Distribution Type Photometric Curve Number 35-17---(Socket Position) All light sources are clear unless otherwise indicated. MC2* MC3* SC2* N/A 7287 (1A) N/A 7286 (2CL) 7285 (1CL) 7303 (2DH) 7304 (1DH) N/A N/A
N/A N/A 7299 (1B)
GE Lighting Systems, Inc. www.gelightingsystems.com
® Registered Trademark of General Electric Company ™ Trademark of General Electric Company Data subject to change without notice
