M10 Quick Start Guide - Freefly Systems
FREEFLY MōVI M10
QUICKSTART This quickstart guide is designed for a first time user. Please refer to the full user guide for more detailed information
A. CHARGE & INSTALL BATTERY 2
3
FULL USER GUIDE
4
5
‘4S’ ‘LiPo’
‘3A’
-
+
BATT.
1
- +
6
1. Read battery / charging safety info (refer to full user guide). 2. Plug Freefly charger into wall. 3. Set charger to “lipo” and “3A” settings. 4. Connect charge leads to charger. 5. Connect battery balance lead to charger. 6. Install battery into MōVI (3 steps).
B. INSTALL & BALANCE CAMERA 1
2
3
4
5
6
1. Mount fully built camera to camera rail. 2. Mount camera to MōVI. 3. Balance tilt axis fore / aft CG. 4. Balance tilt vertical CG. 5. Balance roll axis CG. 6. Balance pan axis CG.
C. TUNING 1
2
3
on/off
tilt
4
5
pan
roll
1. Turn MōVI power switch on. 2. Connect to the MōVI via Bluetooth™(tablet, laptop). 3. Set tilt stiffness (under ‘tilt’ tab of the GUI). 4. Set roll stiffness (under ‘roll’ tab of the GUI). 5. Set pan stiffness (under ‘pan’ tab of the GUI).
D. REMOTE CONTROL
pan speed
3
3
pan /tilt
2 power on
1. Load remote preset from Freefly website (only if your M10 does not include a remote). 2. Power transmitter on. 3. Adjust pan and tilt speeds to user preference.
WWW.FREEFLYSYSTEMS.COM
QUICKSTART This quickstart guide is designed for a first time user. Please refer to the full user guide for more detailed information
A. CHARGE & INSTALL BATTERY 2
3
FULL USER GUIDE
4
5
‘4S’ ‘LiPo’
‘3A’
-
+
BATT.
1
- +
6
1. Read battery / charging safety info (refer to full user guide). 2. Plug Freefly charger into wall. 3. Set charger to “lipo” and “3A” settings. 4. Connect charge leads to charger. 5. Connect battery balance lead to charger. 6. Install battery into MōVI (3 steps).
B. INSTALL & BALANCE CAMERA 1
2
3
4
5
6
1. Mount fully built camera to camera rail. 2. Mount camera to MōVI. 3. Balance tilt axis fore / aft CG. 4. Balance tilt vertical CG. 5. Balance roll axis CG. 6. Balance pan axis CG.
C. TUNING 1
2
3
on/off
tilt
4
5
pan
roll
1. Turn MōVI power switch on. 2. Connect to the MōVI via Bluetooth™(tablet, laptop). 3. Set tilt stiffness (under ‘tilt’ tab of the GUI). 4. Set roll stiffness (under ‘roll’ tab of the GUI). 5. Set pan stiffness (under ‘pan’ tab of the GUI).
D. REMOTE CONTROL
pan speed
3
3
pan /tilt
2 power on
1. Load remote preset from Freefly website (only if your M10 does not include a remote). 2. Power transmitter on. 3. Adjust pan and tilt speeds to user preference.
WWW.FREEFLYSYSTEMS.COM
