Maestro® dimmers, sensors, timers, and fan controls
Designer wallplate opening
Maestro dimmers, sensors, timers, and fan controls ®
2.94 in (75 mm) Product family features True multi-location dimming from every location
•
Tap on to favorite level; tap off; tap twice for full on; touch rocker to adjust light level
•
LEDs indicate light level and glow softly in the dark
•
Delayed off provides light as you exit the room
•
Line frequency compensation maintains stable light levels despite power line frequency and voltage variations
•
4.69 in (119 mm)
Programming allows customized functions
•
C•L® model available—see pg. 01 for details
•
eco-dim®, eco-minderTM and eco-timer models available
•
Mechanical air-gap to disconnect load power
•
Coordinating Claro®, Satin Colors®, and Stainless Steel wallplates only available separately
•
Custom engraving available for wallplates; see pg. 164
•
.30 in (7.6 mm) Control types profile Single-pole (one location) Shown actual size: Maestro dimmer and 1-gang Claro wallplate in White (WH).
-way—available for C•L and occupancy 3 sensing switch version (two locations)
ulti-location dimming from every M location (up to 10 locations)
Direct load type compatibility
Download Maestro specification submittal Download Maestro C•L specification submittal Download high resolution product image 49
Volume 1 P/N 367-1746 REV B
Incandescent/halogen lighting Dimmable CFL/LED lighting (screw-base)
Magnetic low-voltage lighting
Electronic low-voltage lighting
Fluorescent lighting
LED lighting
Ceiling fans
Ceiling fan/lights
Load type requiring load interface Lighting load interfaces may be applicable for some load type, voltage, and capacity combinations. For additional information, see pg. 185.
www.lutron.com/specificationguide | 1.800.523.9466 |
Designer wallplate opening
Maestro dimmers, sensors, timers, and fan controls ®
Available finishes Use BOLD color code in model number (Example: MA-600-BR) Gloss finishes*
LA Light Almond
AL Almond
IV Ivory
GR Gray
BR Brown
BL Black
SW Snow
LS Limestone
BI Biscuit
ES Eggshell
PD Palladium
TP Taupe
ST Stone
BG Bluestone
PL Plum
SG Sea Glass
TQ Turquoise
GS Goldstone
DS Desert Stone
GB Greenbriar
MS Mocha Stone
TC Terracotta
SI Sienna
HT Hot
MR Merlot
MN Midnight
WH White Satin finishes*
SS Stainless Steel
*Coordinating wallplates only available separately. For wallplate information, see pg. 172. Stainless Steel wallplate includes black plastic trim/adapter, visible from side. Match with separate Black (BL) or Midnight (MN) controls. | 1.800.523.9466 | www.lutron.com/specificationguide
Volume 1 P/N 367-1746 REV B
50
Designer wallplate opening
Maestro dimmers, sensors, timers, and fan controls ®
Switches
Switches with sensor Adjustable timeout— 1, 5, 15, or 30 minutes
•
Occupancy/vacancy version can be easily programmed to work as vacancy (manual-on) sensor
•
180° field-of-view
•
Uses standard single-pole and 3-way wiring
•
Vacancy models meet California Title 24 Section 119 ( j) requirements
•
6 A (120/277 V) switch controls: incandescent, halogen, MLV, ELV, non-dim fluorescent (neutral required), and general purpose fans
•
2 A and 5 A switches control: incandescent, halogen, MLV, ELV, and non-dim fluorescent
•
5 A controls general purpose fans
•
Works with up to nine companion switches
•
See pg. 137 for more details
•
XX1: Gloss and Satin Colors® codes, see pg. 50 (Wallplates not included. Order separately, see pg. 169) 57
Volume 1 P/N 367-1746 REV B
Switch with occupancy/vacancy sensor Single-pole MS-OPS2-XX1 120 V 2 A lighting Multi-location/3-way/ MS-OPS5M-XX1 single-pole 120 V 5 A lighting 1/10 HP @ 120 V 3 A fan Dual voltage switch with occupancy/vacancy sensor Multi-location/3-way/ MS-OPS6M2-DV-XX1 single-pole 120 V or 277 V 6 A lighting 1/10 HP @ 120 V 3 A fan Multi-location/3-way/ MS-OPS6M2N-DV-XX1* single-pole 120 V or 277 V 6 A lighting 1/10 HP @ 120 V 3 A fan Switch with vacancy sensor* Single-pole MS-VPS2-XX1 120 V 2 A lighting Multi-location/3-way/ MS-VPS5M-XX1 single-pole 120 V 5 A lighting 1/10 HP @ 120 V 3 A fan Dual voltage switch with vacancy sensor Multi-location/3-way/ MS-VPS6M2-DV-XX1 single-pole 120 V or 277 V 6 A lighting 1/10 HP @ 120 V 3 A fan Multi-location/3-way/ MS-VPS6M2N-DV-XX1* single-pole 120 V or 277 V 6 A lighting 1/10 HP @ 120 V 3 A fan
All models must be derated if ganged unless otherwise noted, see pg. 179. *Requires neutral wire connection. **Minimum load required, see specification submittal.
www.lutron.com/specificationguide | 1.800.523.9466 |
Designer wallplate opening
Maestro dimmers, sensors, timers, and fan controls ®
Connections overview Load connections*
Incandescent/ Halogen
Magnetic Dimmable Low-Voltage CFL/LED (screw-base)
MLV Transformer (by others)
Incandescent/ C•L® C •L Halogen Dimmer Dimmer Dimmer
MLV Dimmer
Control types (for 2 or more locations) Dim from multiple locations (up to 10)
Light Source
MultiLocation Dimmer
Up to 9 Companion Dimmers
Switched Lighting/Fans
Ceiling Fan or Fan/Light
Fan or Fan/Light Canopy Module
Lutron Hi-lume ® A-Series LED Driver
Fluorescent Fluorescent Dimmer Dimmer (3-wire only)
Switch or Timer
Fan or Fan/Light Control
MultiLocation Switch
Up to 9 Companion Switches
Fan or fan/light control from up to 3 locations
Fan or Fan/Light Control
C•L Dimmer 3-Way or Maestro Switch Occupancy Sensing Switch
Volume 1 P/N 367-1746 REV B
ELV Dimmer
Light Source
Download complete Connection Diagrams
61
ELV Transformer (by others)
Lutron Dimming Ballasts
LED
Switch from multiple locations (up to 10)
Dim from one location, switch from others from up to 3 locations
Light Source
Electronic Fluorescent Low-Voltage Lighting
MultiLocation Fan or Fan/ Light Control
Companion Fan or Fan/Light Control
Companion Fan or Fan/Light Control
For more information on ballasts, visit www.lutron.com/ballasts. For more information on LED drivers, visit www.lutron.com/LED. *For illustration purposes only. Consult model number pages for specific voltage and capacity information.
www.lutron.com/specificationguide | 1.800.523.9466 |
Appendix | Mounting, ganging, and derating Mounting requirements and how to understand ganging and derating Individual devices Individual dimmers, switches, wall sensors, and accessories typically mount in standard 1-gang electrical boxes (fig. A). Standard ganging Ganging is the side-by-side mounting of two or more dimmers or accessory devices under a multi-gang wallplate. (fig. B-D)
A 1-gang box (W: 2 in x H: 3 in x D: 2.5 in)
B 2-gang box (W: 4 in x H: 3 in x D: 2.5 in)
Standard multi-gang installation: •
Uses standard multi-gang electrical backboxes
•
Uses standard multi-gang wallplates
Requires fins to be removed from dimmers for proper spacing (“Fins Broken” ganging)
C 3-gang box (W: 6 in x H: 3 in x D: 2.5 in)
•
May require derating (i.e., reduction of dimmer capacity due to fin removal); see derating tables, pg. 181
•
Custom Architectural ganging Architectural dimmers, switches and accessories may be ganged without derating (fig. E), via custom Architectural multi-gang: • May require customized, wider-thanstandard wallplates •
• •
D 4-gang box (W: 8 in x H: 3 in x D: 2.5 in)
E (2) 1-gang boxes with 3/4 in spacer
May require wider-than-standard electrical backboxes Allows full capacity (“No Fins Broken”) ganging Required for Nova® dimmers and for larger width (high capacity) architectural controls
Visit www.lutron.com/customganging for additional information
•
Light load power interfaces (pg. 185) Interfaces typically mount to a standard electrical junction box (fig. F); must be mounted within 7 degrees of vertical. Maximum output: 5.1 in x 6.3 in. Interfaces project 1.2 in in front of box. Ceiling/wall mount sensors (pgs. 43 and 147) Wireless ceiling mount Radio Powr SavrTM sensors (fig. G) mount to brackets provided with sensor using adhesive strips or mounting hardware provided.
179
Volume 1 P/N 367-1746 REV B
F Junction box (W: 4 in x H: 4 in x D: 2.5 in)
G Wireless sensor mounting bracket (3.2 in diameter footprint, mounting brackets are spaced 1.8 in)
www.lutron.com/specificationguide | 1.800.523.9466 |
Maestro dimmers, sensors, timers, and fan controls ®
2.94 in (75 mm) Product family features True multi-location dimming from every location
•
Tap on to favorite level; tap off; tap twice for full on; touch rocker to adjust light level
•
LEDs indicate light level and glow softly in the dark
•
Delayed off provides light as you exit the room
•
Line frequency compensation maintains stable light levels despite power line frequency and voltage variations
•
4.69 in (119 mm)
Programming allows customized functions
•
C•L® model available—see pg. 01 for details
•
eco-dim®, eco-minderTM and eco-timer models available
•
Mechanical air-gap to disconnect load power
•
Coordinating Claro®, Satin Colors®, and Stainless Steel wallplates only available separately
•
Custom engraving available for wallplates; see pg. 164
•
.30 in (7.6 mm) Control types profile Single-pole (one location) Shown actual size: Maestro dimmer and 1-gang Claro wallplate in White (WH).
-way—available for C•L and occupancy 3 sensing switch version (two locations)
ulti-location dimming from every M location (up to 10 locations)
Direct load type compatibility
Download Maestro specification submittal Download Maestro C•L specification submittal Download high resolution product image 49
Volume 1 P/N 367-1746 REV B
Incandescent/halogen lighting Dimmable CFL/LED lighting (screw-base)
Magnetic low-voltage lighting
Electronic low-voltage lighting
Fluorescent lighting
LED lighting
Ceiling fans
Ceiling fan/lights
Load type requiring load interface Lighting load interfaces may be applicable for some load type, voltage, and capacity combinations. For additional information, see pg. 185.
www.lutron.com/specificationguide | 1.800.523.9466 |
Designer wallplate opening
Maestro dimmers, sensors, timers, and fan controls ®
Available finishes Use BOLD color code in model number (Example: MA-600-BR) Gloss finishes*
LA Light Almond
AL Almond
IV Ivory
GR Gray
BR Brown
BL Black
SW Snow
LS Limestone
BI Biscuit
ES Eggshell
PD Palladium
TP Taupe
ST Stone
BG Bluestone
PL Plum
SG Sea Glass
TQ Turquoise
GS Goldstone
DS Desert Stone
GB Greenbriar
MS Mocha Stone
TC Terracotta
SI Sienna
HT Hot
MR Merlot
MN Midnight
WH White Satin finishes*
SS Stainless Steel
*Coordinating wallplates only available separately. For wallplate information, see pg. 172. Stainless Steel wallplate includes black plastic trim/adapter, visible from side. Match with separate Black (BL) or Midnight (MN) controls. | 1.800.523.9466 | www.lutron.com/specificationguide
Volume 1 P/N 367-1746 REV B
50
Designer wallplate opening
Maestro dimmers, sensors, timers, and fan controls ®
Switches
Switches with sensor Adjustable timeout— 1, 5, 15, or 30 minutes
•
Occupancy/vacancy version can be easily programmed to work as vacancy (manual-on) sensor
•
180° field-of-view
•
Uses standard single-pole and 3-way wiring
•
Vacancy models meet California Title 24 Section 119 ( j) requirements
•
6 A (120/277 V) switch controls: incandescent, halogen, MLV, ELV, non-dim fluorescent (neutral required), and general purpose fans
•
2 A and 5 A switches control: incandescent, halogen, MLV, ELV, and non-dim fluorescent
•
5 A controls general purpose fans
•
Works with up to nine companion switches
•
See pg. 137 for more details
•
XX1: Gloss and Satin Colors® codes, see pg. 50 (Wallplates not included. Order separately, see pg. 169) 57
Volume 1 P/N 367-1746 REV B
Switch with occupancy/vacancy sensor Single-pole MS-OPS2-XX1 120 V 2 A lighting Multi-location/3-way/ MS-OPS5M-XX1 single-pole 120 V 5 A lighting 1/10 HP @ 120 V 3 A fan Dual voltage switch with occupancy/vacancy sensor Multi-location/3-way/ MS-OPS6M2-DV-XX1 single-pole 120 V or 277 V 6 A lighting 1/10 HP @ 120 V 3 A fan Multi-location/3-way/ MS-OPS6M2N-DV-XX1* single-pole 120 V or 277 V 6 A lighting 1/10 HP @ 120 V 3 A fan Switch with vacancy sensor* Single-pole MS-VPS2-XX1 120 V 2 A lighting Multi-location/3-way/ MS-VPS5M-XX1 single-pole 120 V 5 A lighting 1/10 HP @ 120 V 3 A fan Dual voltage switch with vacancy sensor Multi-location/3-way/ MS-VPS6M2-DV-XX1 single-pole 120 V or 277 V 6 A lighting 1/10 HP @ 120 V 3 A fan Multi-location/3-way/ MS-VPS6M2N-DV-XX1* single-pole 120 V or 277 V 6 A lighting 1/10 HP @ 120 V 3 A fan
All models must be derated if ganged unless otherwise noted, see pg. 179. *Requires neutral wire connection. **Minimum load required, see specification submittal.
www.lutron.com/specificationguide | 1.800.523.9466 |
Designer wallplate opening
Maestro dimmers, sensors, timers, and fan controls ®
Connections overview Load connections*
Incandescent/ Halogen
Magnetic Dimmable Low-Voltage CFL/LED (screw-base)
MLV Transformer (by others)
Incandescent/ C•L® C •L Halogen Dimmer Dimmer Dimmer
MLV Dimmer
Control types (for 2 or more locations) Dim from multiple locations (up to 10)
Light Source
MultiLocation Dimmer
Up to 9 Companion Dimmers
Switched Lighting/Fans
Ceiling Fan or Fan/Light
Fan or Fan/Light Canopy Module
Lutron Hi-lume ® A-Series LED Driver
Fluorescent Fluorescent Dimmer Dimmer (3-wire only)
Switch or Timer
Fan or Fan/Light Control
MultiLocation Switch
Up to 9 Companion Switches
Fan or fan/light control from up to 3 locations
Fan or Fan/Light Control
C•L Dimmer 3-Way or Maestro Switch Occupancy Sensing Switch
Volume 1 P/N 367-1746 REV B
ELV Dimmer
Light Source
Download complete Connection Diagrams
61
ELV Transformer (by others)
Lutron Dimming Ballasts
LED
Switch from multiple locations (up to 10)
Dim from one location, switch from others from up to 3 locations
Light Source
Electronic Fluorescent Low-Voltage Lighting
MultiLocation Fan or Fan/ Light Control
Companion Fan or Fan/Light Control
Companion Fan or Fan/Light Control
For more information on ballasts, visit www.lutron.com/ballasts. For more information on LED drivers, visit www.lutron.com/LED. *For illustration purposes only. Consult model number pages for specific voltage and capacity information.
www.lutron.com/specificationguide | 1.800.523.9466 |
Appendix | Mounting, ganging, and derating Mounting requirements and how to understand ganging and derating Individual devices Individual dimmers, switches, wall sensors, and accessories typically mount in standard 1-gang electrical boxes (fig. A). Standard ganging Ganging is the side-by-side mounting of two or more dimmers or accessory devices under a multi-gang wallplate. (fig. B-D)
A 1-gang box (W: 2 in x H: 3 in x D: 2.5 in)
B 2-gang box (W: 4 in x H: 3 in x D: 2.5 in)
Standard multi-gang installation: •
Uses standard multi-gang electrical backboxes
•
Uses standard multi-gang wallplates
Requires fins to be removed from dimmers for proper spacing (“Fins Broken” ganging)
C 3-gang box (W: 6 in x H: 3 in x D: 2.5 in)
•
May require derating (i.e., reduction of dimmer capacity due to fin removal); see derating tables, pg. 181
•
Custom Architectural ganging Architectural dimmers, switches and accessories may be ganged without derating (fig. E), via custom Architectural multi-gang: • May require customized, wider-thanstandard wallplates •
• •
D 4-gang box (W: 8 in x H: 3 in x D: 2.5 in)
E (2) 1-gang boxes with 3/4 in spacer
May require wider-than-standard electrical backboxes Allows full capacity (“No Fins Broken”) ganging Required for Nova® dimmers and for larger width (high capacity) architectural controls
Visit www.lutron.com/customganging for additional information
•
Light load power interfaces (pg. 185) Interfaces typically mount to a standard electrical junction box (fig. F); must be mounted within 7 degrees of vertical. Maximum output: 5.1 in x 6.3 in. Interfaces project 1.2 in in front of box. Ceiling/wall mount sensors (pgs. 43 and 147) Wireless ceiling mount Radio Powr SavrTM sensors (fig. G) mount to brackets provided with sensor using adhesive strips or mounting hardware provided.
179
Volume 1 P/N 367-1746 REV B
F Junction box (W: 4 in x H: 4 in x D: 2.5 in)
G Wireless sensor mounting bracket (3.2 in diameter footprint, mounting brackets are spaced 1.8 in)
www.lutron.com/specificationguide | 1.800.523.9466 |
