Magic Bullet NutriBullet Rubber Gasket Replacement

Magic Bullet NutriBullet Rubber Gasket Replacement

Magic Bullet NutriBullet Rubber Gasket Replacement Replace the gasket if worn out or torn to prevent leakage.

Written By: Geary Yu

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Magic Bullet NutriBullet Rubber Gasket Replacement

INTRODUCTION Did your device leak liquid? Do it seem to not seal as well as before? Replace the gasket to create a new seal and prevent leaking from your cup.

TOOLS: Tweezers (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Magic Bullet NutriBullet Rubber Gasket Replacement

Step 1 — Rubber Gasket 

Separate the blending blade lid from the cup.

Step 2



Using tweezers, grab the gasket at the indented lip which is located on the side of the blending blade.



Slowly pry the rubber gasket up.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Magic Bullet NutriBullet Rubber Gasket Replacement

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-19 04:01:40 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4