Manual For RGB Color Wheel Sync Controller - Ecolocity LED
Color Wheel Controller Kit Instructions - SKU: LC-LT-RGBA-KIT Remote and Receiver Pairing Instructions: 1. Charge your Color Wheel remote (5VDC ONLY) using the provided USB Cable. Press the power button on remote to see the status of charge, flashing blue light indicates charging, solid green indicates full charge. Fully charge for first 3 charges. 2. Bring 12 or 24VDC power to your receiver and hook up to LED Lights. With power ON to your RGB Receiver press and hold the power button for 3 seconds until you here a beeping sound, continue to hold the power button. 3. While continuing to hold the power button on the receiver press and hold any button on the Color Wheel remote. A green flashing light on the remote will indicate successful pairing. Repeat this process to sync and unlimited amount of RGB receivers. **NOTE** To unpair the receiver and remote duplicate the above process and red indicator light on remote will indicate cancellation of the remote and receiver pairing.
IMPORTANT WARNING This is a touch sensitive keypad that responds to very light touch. There is no need to assert an excessive amount of pressure on these buttons. Doing so may damage the unit and void any warranty replacement.
Controller sign Remote control sign Button ON/OFF
Description ●
●
PAUSE
● ●
MODE+ MODE-
SPEED+ SPEED-
●
●
Turn the controller on/off Short press to pause at current color Short press to un-pause and play current mode Press and hold for 3 seconds to turn on/off controller beeping Short press to navigate between the next or previous mode
Short press to increase or decrease speed on color changing modes.
BRT+ BRT-
●
Short press to increase or decrease brightness
Full-Color Touch circle
●
Touch the color wheel to choose an array of static colors
●
9 DIY keys
●
●
Short touch to play stored scenes Press and hold number for 3 seconds to save the present mode, save one mode per number on remote keypad Press “PLAY” to play through saved modes on keypad, static colors will be skipped playing only color changing effects
775-636-6060
IMPORTANT WARNING This is a touch sensitive keypad that responds to very light touch. There is no need to assert an excessive amount of pressure on these buttons. Doing so may damage the unit and void any warranty replacement.
Controller sign Remote control sign Button ON/OFF
Description ●
●
PAUSE
● ●
MODE+ MODE-
SPEED+ SPEED-
●
●
Turn the controller on/off Short press to pause at current color Short press to un-pause and play current mode Press and hold for 3 seconds to turn on/off controller beeping Short press to navigate between the next or previous mode
Short press to increase or decrease speed on color changing modes.
BRT+ BRT-
●
Short press to increase or decrease brightness
Full-Color Touch circle
●
Touch the color wheel to choose an array of static colors
●
9 DIY keys
●
●
Short touch to play stored scenes Press and hold number for 3 seconds to save the present mode, save one mode per number on remote keypad Press “PLAY” to play through saved modes on keypad, static colors will be skipped playing only color changing effects
775-636-6060
