Mep final - Gescan
WALL TERMINATION ANGLE/UNIVERSAL BLIND END Dimensions Support and terminate runs of cable tray with this wall termination angle. Can be used as a wall
any tray run. Adapts to any configuration and any width. Available in pre-galvanized steel. Mounting
0.367 in. 9.322 mm
1.00 in. 25.4 mm
R 0.156 in. 3.962 mm
support, floor to ceiling support or to safely terminate
1.962 in. 49.83 mm
hardware sold separately. R 0.062 in. 1.57 mm
0.398 in. 10.11 mm
1.950 in. 49.53 mm
0.75 in. 19.05 mm
0.962 in. 24.43 mm
9.50 in. 241.3 mm
0.463 in. 11.76 mm
Material
Catalogue number
Pre-galvanized Steel
ETA-WTA-PG
Refer to page 58 for an application example. Weight lb/ea. kg/ea.
0.36
0.17
Tool required: 10mm nut driver
90 DEGREE BRACKET Dimensions Create high strength tee, cross and other 90 degree
.787 in. 20 mm
configurations with this 90 degree bracket. Available in hot-dipped galvanized steel either as a single bracket 1.574 in. 40.0 mm
9.07 in. 230.5 mm
or a kit including one (1) bracket, four (4) bracket clamps and one (1) hot-dipped galvanized universal splice.
.118 in. / 3 mm 9.07 in. 230.5 mm
Description
Catalogue number
Single 90 Degree Bracket 90 Degree Bracket Kit*
ETA-H90-HD ETA-H90KIT-HD
Refer to page 49 for an application example.
.255 in. 6,5 mm
Weight lb/ea. kg/ea.
0.62 0.69
* Kit includes — 1 90˚ bracket (ETA-H90-HD), 4 bracket clamps (ETH-WBC-HD) and 1 universal splice (ETH-SP-HD).
30
Tool required: 10mm nut driver
0.28 0.31
10
ACCESSORIES CABLE DROP-OUT Dimensions This 2 in. radius cable drop-out protects cables when
0.125 in. X 1.125 in. / 3.2 mm X 28.6 mm
0.750 in. / 19.0 mm
exiting or entering tray by reducing the strain on
4.125 in. 104.8 mm R 2.00 in. 50.8mm 1.00 in. 25.4 mm
the cables. The drop-out attaches to tray with 1.50 in. 38.1 mm
widths available in pre-galvanized steel. This W
0.863 in. / 21.9 mm
0.750 in. / 19.0 mm
1.50 in. 38.1 mm
Illustration shows a 3.5 in. drop-out. Width (W) mm
Catalogue number
1.75 3.50 5.25
45 90 135
ETA-CDOU17-PG ETA-CDOU35-PG ETA-CDOU52-PG
drop-out is suitable for use with all tray widths and heights.
0.250 in. / 6.3 mm 6.375 in. 161.9 mm
in.
built-in tabs. No hardware is required. Three different
Weight lb/ea. kg/ea.
0.16 0.31 0.49
Refer to page 50 for application examples.
0.07 0.14 0.22
LARGE CABLE DROP-OUT Dimensions use the 7 in. radius large cable drop-out to protect
12.25 in. 311.1 mm 2.00 in. 50.8 mm
2.75 in. 69.8 mm
R 0.6 in. 15.2 mm
R 10.8 35 in. 275.21 mm
R 0.6 in. 15.2 mm 1 28 .2
cable exiting or entering tray runs. Available in pre-galvanized steel, the large cable drop-out has a versatile slotted design that enables the use of
5˚
in. 0.506 mm 12.85
1.50 in. 38.1 mm
0.82 in. 20.8 mm
For larger cable tray widths and heavier cable loading,
Ty-Rap® cable ties or Ty-Grip™ fasteners to attach the cable bundles to the drop-out.
Use built-in tabs to attach to siderails or universal clamp (see page 32) to attach to the end of cable runs. Material
Pre-galvanized Steel
Catalogue number
Weight lb/ea.
kg/ea.
ETA-CDOUL-PG
0.90
0.40
31
Refer to page 50 for an application example.
SIDE HANGER CLAMP Dimensions 1.259 in. 32 mm
M4
Material
Catalogue number
Pre-galvanized Steel Hot-dipped Galvanized Steel Stainless Steel (Type 316)
ETH-SH-PG ETH-SH-HD ETH-SH-S6
.433 in. / 11 mm .354 in. 9 mm
.437 in. 11 mm
2.283 in. 58 mm
.781 in. 20 mm
1.181 in. 30 mm
.590 in. 15 mm
Weight lb/ea. kg/ea.
0.13 0.13 0.18
0.06 0.06 0.08
The side hanger clamp is used to construct trapeze supports using threaded rods. The offset support hole allows for trouble-free access to support nuts for height adjustment and the rod can continue downward to allow for multi-level (tiered) trapeze installations. A set screw holds tray firmly in position once installation is complete. Available in pre-galvanized steel. For use with 3/8" threaded rod.
Refer to page 54 for an application example.
20
UNIVERSAL CLAMP Dimensions
1.575 in. 40 mm
.433 in. / 11 mm
The universal clamp is used to secure large cable drop-outs to the end of a cable run as well as attaching bottom inserts to lengths of ExpressTray®.
25 Refer to pages 50 and 51 for application examples.
2.362 in. 60 mm
Material
Catalogue number
Pre-galvanized Steel Hot-dipped Galvanized Steel Stainless Steel (Type 304)
ETH-UNIVC-PG ETH-UNIVC-HD ETH-UNIVC-SS
Weight lb/ea. kg/ea.
0.09 0.09 0.09
0.04 0.04 0.04
Note: To hold down 2 in. x 2 in. wire basket tray, use 1 ETH-UNIVC-XX with bottom half of ETH-SP-XX. See page 20.
WALL CLAMP Dimensions
2 in. 50 mm
1.023 in. 26 mm
Material
Pre-galvanized Steel Stainless Steel (Type 304)
This wall clamp attaches the flange of U- and C-profile ExpressTray ®, up to a maximum of 8" wide, to the wall surface. Available in pre-galvanized steel and stainless steel.
0.59 in. 15 mm
0.33 in. / 11 mm X 0.63 in. / 16 mm
2 in. 50 mm
0.2 in. 5 mm
Catalogue number
lb/ea.
kg/ea.
ETH-WC-PG ETH-WC-SS
0.39 0.39
0.18 0.18
Refer to page 57 for an application example.
Weight
32
25
ACCESSORIES THREADED ROD CLAMP Dimensions This clamp is used for center-hung applications to secure tray sections to threaded rod for ceiling
2.559 in. 65 mm
mounting and can be used with U-profile tray in 4", 8" and 12" widths. This clamp is not designed for use .433 in. / 11 mm
with C-profile tray. Available in pre-galvanized steel,
1.575 in. 40 mm
hot-dipped galvanized steel and stainless steel (Type 316). For use with 3/8" threaded rod.
Material
Catalogue number
Pre-galvanized Steel Hot-dipped Galvanized Steel Stainless Steel (Type 316)
ETH-CHC-PG ETH-CHC-HD ETH-CHC-S6
Weight lb/ea. kg/ea.
0.18 0.18 0.18
Refer to page 53 for application examples.
0.08 0.08 0.08
25
SUPERSTRUT® THREADED ROD Dimensions Used for overhead mounting of ExpressTray® with threaded rod clamp, side hanger clamps or strut. Available in 1/4" and 3/8" diameters, threaded rods 10 ft 300 cm
are made of electro-galvanized steel.
Order nut and washer separately.
D
(See page 39).
Size (D)
Thread per in.
Catalogue number
Weight lb/length kg/length
1/4 in. dia. 3/8 in. dia.
20 16
H104-1/4X10EGC H104-3/8X10EGC
33
1.25 1.25
0.57 0.57
Refer to pages 52, 53 and 54 for application examples.
SUPERSTRUT® (METAL FRAMING CHANNEL) Dimensions Superstrut® metal framing channel is sold in 10-foot lengths and the standard finish is pre-galvanized steel. Strut is unpunched (not perforated) and must be field-cut and drilled for customized supports with maximum economy. Other finishes and configurations are available, contact your Regional Sales Office for further information.
1.625 in. 41 mm
.812 in. 21 mm
.875 in. 22 mm
Material
Pre-galvanized Steel
Catalogue number
lb/ea.
Weight kg/ea.
B120010PG
12.80
5.80
BARRIER STRIP Dimensions .984 in. 25 mm 25 mm
1.476 in. 37.5 mm
15 mm
1.062 in. 27 mm
.590 in.
H
.984 in.
.472 in. 12 mm
.275 in. / 7 mm X .787 in. / 20 mm
.275 in. / 7 mm
Height (H) in. mm
Material
Catalogue number
3.937 in. 100 mm
Refer to page 61 for an application example.
Weight lb/length kg/length
1.750 1.750 1.750 1.750
450 450 450 450
Pre-galvanized Steel Hot-dipped Galvanized Steel Stainless Steel (Type 304) Stainless Steel (Type 316)
ET-BS175-PG ET-BS175-HD ET-BS175-SS ET-BS175-S6
3.15 3.30 3.37 3.37
1.43 1.50 1.53 1.53
3.375 3.375 3.375 3.375
850 850 850 850
Pre-galvanized Steel Hot-dipped Galvanized Steel Stainless Steel (Type 304) Stainless Steel (Type 316)
ET-BS338-PG ET-BS338-HD ET-BS338-SS ET-BS338-S6
3.15 3.15 3.15 3.15
1.43 1.43 1.43 1.43
34
Used to separate bundles of power, communication and data cables. Barrier strips are sold in standard 10-foot lengths and are available in 1-3/4" and 3-3/8" heights. Available in pre-galvanized steel, hot-dipped galvanized and stainless steel (304 and 316). For use with barrier strip connector and barrier strip clamp on page 35.
ACCESSORIES BARRIER STRIP CONNECTOR Dimensions This connector is used to connect lengths of barrier
4 in. 100 mm
strips and is available in two sizes for use with
1.62 in. 41 mm
ET-BSH175
1-3/4" and 3-3/8" barrier strips. Available in
t c u d o r P w e -SS N by NIV d U e c H a pl -BS e R ET
pre-galvanized steel, hot-dipped galvanized steel
ET-BSH338
and stainless steel (304 and 316). Supplied
8 in. 200 mm
3.19 in. 81 mm
complete with mounting hardware.
Height (H) in. mm
Material
Catalogue number
Refer to page 61 for an application example.
Weight lb/length kg/length
1.620 1.620 1.620 1.620
41 41 41 41
Pre-galvanized Steel Hot-dipped Galvanized Steel Stainless Steel (Type 304) Stainless Steel (Type 316)
ET-BSH175-PG ET-BSH175-HD ET-BSH175-SS ET-BSH175-S6
0.15 0.15 0.15 0.15
0.07 0.07 0.07 0.07
3.187 3.187 3.187 3.187
81 81 81 81
Pre-galvanized Steel Hot-dipped Galvanized Steel Stainless Steel (Type 304) Stainless Steel (Type 316)
ET-BSH338-PG ET-BSH338-HD ET-BSH338-SS ET-BSH338-S6
0.52 0.52 0.52 0.52
0.24 0.24 0.24 0.24
10
BARRIER STRIP CLAMP Dimensions The barrier strip clamp is used to mount .687 in. 17.5 mm
electro-galvanized steel, hot-dipped galvanized steel and stainless steel (304 and 316).
.937 in. 23.8 mm
.266 in. 6.8 mm
barrier strips to ExpressTray® profiles. Available in
Refer to page 61 for an application example.
1.562 in. 39.7 mm
Material
Catalogue number
Electro-galvanized Steel Hot-dipped Galvanized Steel Stainless Steel (Type 304) Stainless Steel (Type 316)
ETH-BSC-EG ETH-BSC-HD ETH-BSC-SS ETH-BSC-S6
Weight lb/ea. kg/ea.
0.07 0.07 0.07 0.07
35
0.03 0.03 0.03 0.03
25
COVER and BOTTOM INSERT Dimensions ExpressTray® covers and bottom inserts protect cables from dust build-up and provide a physical barrier in environments where cables must be L
0.625 in. 15.875 mm
protected from machinery or vandalism.
W+ .125 in./ 4.0 mm
Attach bottoms to tray using universal clamps (see page 32) and secure covers using cover clips (see page 37).
Solid Bottom Insert
Available in pre-galvanized steel in widths from 2" to 24". Available in lengths of 120" or 40". Description
Width (W) in. mm
Catalogue number Covers
Weight Catalogue number Bottoms lb/ea. kg/ea.
Weight lb/ea. kg/ea.
2 4 Solid Covers 6 and Bottoms 8 120 in. (3 meters) 12 Length 16 (L) 18 20 24
50 100 150 200 300 400 450 500 600
ETA-COVS02PG-120 1.59 ETA-COVS04PG-120 2.03 ETA-COVS06PG-120 2.45 ETA-COVS08PG-120 4.19 ETA-COVS12PG-120 5.91 ETA-COVS16PG-120 7.65 ETA-COVS18PG-120 8.42 ETA-COVS20PG-120 9.39 ETA-COVS24PG-120 11.11
0.72 0.92 1.11 1.90 2.68 3.47 3.82 4.26 5.04
ETA-BIS02PG-120 1.51 ETA-BIS04PG-120 1.93 ETA-BIS06PG-120 2.33 ETA-BIS08PG-120 3.98 ETA-BIS12PG-120 5.61 ETA-BIS16PG-120 7.27 ETA-BIS18PG-120 8.00 ETA-BIS20PG-120 8.92 ETA-BIS24PG-120 10.55
0.68 0.87 1.05 1.81 2.55 3.30 3.63 4.05 4.79
2 4 6 8 12 16 18 20 24
50 100 150 200 300 400 450 500 600
ETA-COVS02PG-40 ETA-COVS04PG-40 ETA-COVS06PG-40 ETA-COVS08PG-40 ETA-COVS12PG-40 ETA-COVS16PG-40 ETA-COVS18PG-40 ETA-COVS20PG-40 ETA-COVS24PG-40
0.53 0.68 0.82 1.40 1.97 2.55 2.81 3.13 3.70
0.24 0.31 0.37 0.63 0.89 1.16 1.27 1.42 1.68
ETA-BIS02PG-40 ETA-BIS04PG-40 ETA-BIS06PG-40 ETA-BIS08PG-40 ETA-BIS12PG-40 ETA-BIS16PG-40 ETA-BIS18PG-40 ETA-BIS20PG-40 ETA-BIS24PG-40
0.50 0.64 0.78 1.33 1.87 2.42 2.67 2.97 3.52
0.23 0.29 0.35 0.60 0.85 1.10 1.21 1.35 1.60
2 4 Vented Covers 6 and Bottoms 8 120 in. (3 meters) 12 Length 16 (L) 18 20 24
50 100 150 200 300 400 450 500 600
ETA-COVV02PG-120 1.54 ETA-COVV04PG-120 1.97 ETA-COVV06PG-120 2.38 ETA-COVV08PG-120 4.06 ETA-COVV12PG-120 5.73 ETA-COVV16PG-120 7.42 ETA-COVV18PG-120 8.17 ETA-COVV20PG-120 9.11 ETA-COVV24PG-120 10.78
0.70 0.89 1.08 1.84 2.60 3.37 3.71 4.13 4.89
ETA-BIV02PG-120 1.47 ETA-BIV04PG-120 1.87 ETA-BIV06PG-120 2.26 ETA-BIV08PG-120 3.86 ETA-BIV12PG-120 5.45 ETA-BIV16PG-120 7.05 ETA-BIV18PG-120 7.76 ETA-BIV20PG-120 8.65 ETA-BIV24PG-120 10.24
0.66 0.85 1.02 1.75 2.47 3.20 3.52 3.93 4.64
2 4 6 8 12 16 18 20 24
50 100 150 200 300 400 450 500 600
ETA-COVV02PG-40 ETA-COVV04PG-40 ETA-COVV06PG-40 ETA-COVV08PG-40 ETA-COVV12PG-40 ETA-COVV16PG-40 ETA-COVV18PG-40 ETA-COVV20PG-40 ETA-COVV24PG-40
0.23 0.30 0.36 0.61 0.87 1.12 1.24 1.38 1.63
ETA-BIV02PG-40 ETA-BIV04PG-40 ETA-BIV06PG-40 ETA-BIV08PG-40 ETA-BIV12PG-40 ETA-BIV16PG-40 ETA-BIV18PG-40 ETA-BIV20PG-40 ETA-BIV24PG-40
0.22 0.28 0.34 0.58 0.82 1.07 1.17 1.31 1.55
Solid Covers and Bottoms 40 in. (1 meter) Length (L)
Vented Covers and Bottoms 40 in. (1 meter) Length (L)
0.51 0.66 0.79 1.35 1.91 2.47 2.72 3.04 3.59
36
0.49 0.62 0.75 1.29 1.82 2.35 2.59 2.88 3.41
Available in solid or slotted design.
Refer to page 51 for an application example.
ACCESSORIES COVER CLIP Dimensions 0.157 in. 4 mm
Secure covers to tray quickly with this cover clip. Available in stainless steel (type 316), the cover
1.3 in. 33 mm
0.57 in. 14.5 mm
1.85 in. 47 mm
45˚
clip uses built-in tabs to secure the cover and to facilitate removal of the cover when required. No tools required.
0.394 in. 10 mm 0.787 in. 20 mm
Material
Catalogue number
Weight lb/ea. kg/ea.
Stainless Steel (Type 316)
ETA-CC-S6
0.10
Refer to page 51 for an application example.
20
0.05
BLACKBURN ® GROUNDING CONNECTOR Dimensions 1.39 in. 35.3 mm
. .88 in m m 23.3
.63 16.0 in. mm
Note: To ensure electrical continuity, the Blackburn® GPT-2 grounding connnector and ground wire MUST be used in all QuikLokTM Series tray applications.
Conductor Range
Catalogue number
#12 - #2 AWG
GPT-2
Weight lb/ea. kg/ea.
0.06
0.03
ETG LAY-IN GROUND LUG E T G 2 4 - L L 2 1 4 ExpressTray® Ground
2” through Lay in Lug #2 AWG through 4” depth #14 AWG
Lay in lug design easily installs onto any ExpressTray® 2” through 4” deep without any disassembly required. Approved for steel and stainless steel wire mesh trays. Accepts 12 AWG solid through 2 AWG stranded aluminum and 14 AWG solid/stranded through 2 AWG stranded copper conductors. “Slotted hook” design sits securely onto the ExpressTray® mesh intersections to restrict swiveling. Must be used on each length of QuikLokTM series tray applications to meet CSA requirements.
37
NEW
!
SUPERSTRUT® "BAT" CLIP
Attaches ExpressTray® to Stut
Material
Catalogue number
Weight lb/100 kg/100
SSF-CK535
Spring Steel with zinc phosphate finish (black)
1.20
0.55
Specifications — One piece construction — No installation tools required To install, just hook one under the strut flange and down the other wing with thumb to slip it under the flange.
— Reduces installation time to the minimum — For horizontal applications
wing push your strut
Position "BAT" Clip on outer wires of tray and opposing sides of the strut flanges
Note: "BAT" Clip shoud be used for horizontal tray/strut applications. For vertical tray/strut applications, the universal clamp (page 32) should be used to clamp ExpressTray® to strut using a bolt and spring nut (page 39).
BEAM CLAMP Dimensions 2.165 in. 55 mm
This clamp is used primarily to attach L-profile
M8 X 25 Hexagon Head Bolt
attach U- and C-profiles onto structural steel. Available
H
.25 in. 6.4 mm
ExpressTray® to steel beams. It can also be used to
in 3/4" and 1-1/8" sizes in hot-dipped galvanized steel. 1.181 in. 30 mm
Height (H) in. mm
0.750 1.125
20 30
Catalogue number
ETH-IBC3/4-HD ETH-IBC1-HD
Weight lb/ea. kg/ea.
0.44 0.47
38
0.20 0.22
10 Refer to page 61 for an application example.
ACCESSORIES SUPERSTRUT® HEXAGONAL NUT For use with Superstrut® threaded rod. Available in two sizes, 1/4" and 3/8", in electro-galvanized steel.
Size
1/4 in. hex nut 3/8 in. hex nut
Catalogue number
lb/ea.
Weight kg/ea.
E145-1/4EGC E145-3/8EGC
0.01 0.01
0.004 0.004
SUPERSTRUT® FLAT WASHER For use with Superstrut® threaded rod and hex nut. Available in 1/4" and 3/8" sizes, in electro-galvanized steel.
Size
1/4 in. flat washer 3/8 in. flat washer
Catalogue number
lb/ea.
Weight kg/ea.
E147-1/4EGC E147-3/8EGC
0.03 0.04
0.02 0.02
SUPERSTRUT® SPRING NUT For use with B-Series metal framing channel, spring nuts are offered in 1/4" and 3/8" sizes in electro-galvanized steel.
Size
1/4 in. spring nut 3/8 in. spring nut
39
Catalogue number
lb/ea.
Weight kg/ea.
B100-1/4EGC B100-3/8EGC
0.44 0.46
0.20 0.20
any tray run. Adapts to any configuration and any width. Available in pre-galvanized steel. Mounting
0.367 in. 9.322 mm
1.00 in. 25.4 mm
R 0.156 in. 3.962 mm
support, floor to ceiling support or to safely terminate
1.962 in. 49.83 mm
hardware sold separately. R 0.062 in. 1.57 mm
0.398 in. 10.11 mm
1.950 in. 49.53 mm
0.75 in. 19.05 mm
0.962 in. 24.43 mm
9.50 in. 241.3 mm
0.463 in. 11.76 mm
Material
Catalogue number
Pre-galvanized Steel
ETA-WTA-PG
Refer to page 58 for an application example. Weight lb/ea. kg/ea.
0.36
0.17
Tool required: 10mm nut driver
90 DEGREE BRACKET Dimensions Create high strength tee, cross and other 90 degree
.787 in. 20 mm
configurations with this 90 degree bracket. Available in hot-dipped galvanized steel either as a single bracket 1.574 in. 40.0 mm
9.07 in. 230.5 mm
or a kit including one (1) bracket, four (4) bracket clamps and one (1) hot-dipped galvanized universal splice.
.118 in. / 3 mm 9.07 in. 230.5 mm
Description
Catalogue number
Single 90 Degree Bracket 90 Degree Bracket Kit*
ETA-H90-HD ETA-H90KIT-HD
Refer to page 49 for an application example.
.255 in. 6,5 mm
Weight lb/ea. kg/ea.
0.62 0.69
* Kit includes — 1 90˚ bracket (ETA-H90-HD), 4 bracket clamps (ETH-WBC-HD) and 1 universal splice (ETH-SP-HD).
30
Tool required: 10mm nut driver
0.28 0.31
10
ACCESSORIES CABLE DROP-OUT Dimensions This 2 in. radius cable drop-out protects cables when
0.125 in. X 1.125 in. / 3.2 mm X 28.6 mm
0.750 in. / 19.0 mm
exiting or entering tray by reducing the strain on
4.125 in. 104.8 mm R 2.00 in. 50.8mm 1.00 in. 25.4 mm
the cables. The drop-out attaches to tray with 1.50 in. 38.1 mm
widths available in pre-galvanized steel. This W
0.863 in. / 21.9 mm
0.750 in. / 19.0 mm
1.50 in. 38.1 mm
Illustration shows a 3.5 in. drop-out. Width (W) mm
Catalogue number
1.75 3.50 5.25
45 90 135
ETA-CDOU17-PG ETA-CDOU35-PG ETA-CDOU52-PG
drop-out is suitable for use with all tray widths and heights.
0.250 in. / 6.3 mm 6.375 in. 161.9 mm
in.
built-in tabs. No hardware is required. Three different
Weight lb/ea. kg/ea.
0.16 0.31 0.49
Refer to page 50 for application examples.
0.07 0.14 0.22
LARGE CABLE DROP-OUT Dimensions use the 7 in. radius large cable drop-out to protect
12.25 in. 311.1 mm 2.00 in. 50.8 mm
2.75 in. 69.8 mm
R 0.6 in. 15.2 mm
R 10.8 35 in. 275.21 mm
R 0.6 in. 15.2 mm 1 28 .2
cable exiting or entering tray runs. Available in pre-galvanized steel, the large cable drop-out has a versatile slotted design that enables the use of
5˚
in. 0.506 mm 12.85
1.50 in. 38.1 mm
0.82 in. 20.8 mm
For larger cable tray widths and heavier cable loading,
Ty-Rap® cable ties or Ty-Grip™ fasteners to attach the cable bundles to the drop-out.
Use built-in tabs to attach to siderails or universal clamp (see page 32) to attach to the end of cable runs. Material
Pre-galvanized Steel
Catalogue number
Weight lb/ea.
kg/ea.
ETA-CDOUL-PG
0.90
0.40
31
Refer to page 50 for an application example.
SIDE HANGER CLAMP Dimensions 1.259 in. 32 mm
M4
Material
Catalogue number
Pre-galvanized Steel Hot-dipped Galvanized Steel Stainless Steel (Type 316)
ETH-SH-PG ETH-SH-HD ETH-SH-S6
.433 in. / 11 mm .354 in. 9 mm
.437 in. 11 mm
2.283 in. 58 mm
.781 in. 20 mm
1.181 in. 30 mm
.590 in. 15 mm
Weight lb/ea. kg/ea.
0.13 0.13 0.18
0.06 0.06 0.08
The side hanger clamp is used to construct trapeze supports using threaded rods. The offset support hole allows for trouble-free access to support nuts for height adjustment and the rod can continue downward to allow for multi-level (tiered) trapeze installations. A set screw holds tray firmly in position once installation is complete. Available in pre-galvanized steel. For use with 3/8" threaded rod.
Refer to page 54 for an application example.
20
UNIVERSAL CLAMP Dimensions
1.575 in. 40 mm
.433 in. / 11 mm
The universal clamp is used to secure large cable drop-outs to the end of a cable run as well as attaching bottom inserts to lengths of ExpressTray®.
25 Refer to pages 50 and 51 for application examples.
2.362 in. 60 mm
Material
Catalogue number
Pre-galvanized Steel Hot-dipped Galvanized Steel Stainless Steel (Type 304)
ETH-UNIVC-PG ETH-UNIVC-HD ETH-UNIVC-SS
Weight lb/ea. kg/ea.
0.09 0.09 0.09
0.04 0.04 0.04
Note: To hold down 2 in. x 2 in. wire basket tray, use 1 ETH-UNIVC-XX with bottom half of ETH-SP-XX. See page 20.
WALL CLAMP Dimensions
2 in. 50 mm
1.023 in. 26 mm
Material
Pre-galvanized Steel Stainless Steel (Type 304)
This wall clamp attaches the flange of U- and C-profile ExpressTray ®, up to a maximum of 8" wide, to the wall surface. Available in pre-galvanized steel and stainless steel.
0.59 in. 15 mm
0.33 in. / 11 mm X 0.63 in. / 16 mm
2 in. 50 mm
0.2 in. 5 mm
Catalogue number
lb/ea.
kg/ea.
ETH-WC-PG ETH-WC-SS
0.39 0.39
0.18 0.18
Refer to page 57 for an application example.
Weight
32
25
ACCESSORIES THREADED ROD CLAMP Dimensions This clamp is used for center-hung applications to secure tray sections to threaded rod for ceiling
2.559 in. 65 mm
mounting and can be used with U-profile tray in 4", 8" and 12" widths. This clamp is not designed for use .433 in. / 11 mm
with C-profile tray. Available in pre-galvanized steel,
1.575 in. 40 mm
hot-dipped galvanized steel and stainless steel (Type 316). For use with 3/8" threaded rod.
Material
Catalogue number
Pre-galvanized Steel Hot-dipped Galvanized Steel Stainless Steel (Type 316)
ETH-CHC-PG ETH-CHC-HD ETH-CHC-S6
Weight lb/ea. kg/ea.
0.18 0.18 0.18
Refer to page 53 for application examples.
0.08 0.08 0.08
25
SUPERSTRUT® THREADED ROD Dimensions Used for overhead mounting of ExpressTray® with threaded rod clamp, side hanger clamps or strut. Available in 1/4" and 3/8" diameters, threaded rods 10 ft 300 cm
are made of electro-galvanized steel.
Order nut and washer separately.
D
(See page 39).
Size (D)
Thread per in.
Catalogue number
Weight lb/length kg/length
1/4 in. dia. 3/8 in. dia.
20 16
H104-1/4X10EGC H104-3/8X10EGC
33
1.25 1.25
0.57 0.57
Refer to pages 52, 53 and 54 for application examples.
SUPERSTRUT® (METAL FRAMING CHANNEL) Dimensions Superstrut® metal framing channel is sold in 10-foot lengths and the standard finish is pre-galvanized steel. Strut is unpunched (not perforated) and must be field-cut and drilled for customized supports with maximum economy. Other finishes and configurations are available, contact your Regional Sales Office for further information.
1.625 in. 41 mm
.812 in. 21 mm
.875 in. 22 mm
Material
Pre-galvanized Steel
Catalogue number
lb/ea.
Weight kg/ea.
B120010PG
12.80
5.80
BARRIER STRIP Dimensions .984 in. 25 mm 25 mm
1.476 in. 37.5 mm
15 mm
1.062 in. 27 mm
.590 in.
H
.984 in.
.472 in. 12 mm
.275 in. / 7 mm X .787 in. / 20 mm
.275 in. / 7 mm
Height (H) in. mm
Material
Catalogue number
3.937 in. 100 mm
Refer to page 61 for an application example.
Weight lb/length kg/length
1.750 1.750 1.750 1.750
450 450 450 450
Pre-galvanized Steel Hot-dipped Galvanized Steel Stainless Steel (Type 304) Stainless Steel (Type 316)
ET-BS175-PG ET-BS175-HD ET-BS175-SS ET-BS175-S6
3.15 3.30 3.37 3.37
1.43 1.50 1.53 1.53
3.375 3.375 3.375 3.375
850 850 850 850
Pre-galvanized Steel Hot-dipped Galvanized Steel Stainless Steel (Type 304) Stainless Steel (Type 316)
ET-BS338-PG ET-BS338-HD ET-BS338-SS ET-BS338-S6
3.15 3.15 3.15 3.15
1.43 1.43 1.43 1.43
34
Used to separate bundles of power, communication and data cables. Barrier strips are sold in standard 10-foot lengths and are available in 1-3/4" and 3-3/8" heights. Available in pre-galvanized steel, hot-dipped galvanized and stainless steel (304 and 316). For use with barrier strip connector and barrier strip clamp on page 35.
ACCESSORIES BARRIER STRIP CONNECTOR Dimensions This connector is used to connect lengths of barrier
4 in. 100 mm
strips and is available in two sizes for use with
1.62 in. 41 mm
ET-BSH175
1-3/4" and 3-3/8" barrier strips. Available in
t c u d o r P w e -SS N by NIV d U e c H a pl -BS e R ET
pre-galvanized steel, hot-dipped galvanized steel
ET-BSH338
and stainless steel (304 and 316). Supplied
8 in. 200 mm
3.19 in. 81 mm
complete with mounting hardware.
Height (H) in. mm
Material
Catalogue number
Refer to page 61 for an application example.
Weight lb/length kg/length
1.620 1.620 1.620 1.620
41 41 41 41
Pre-galvanized Steel Hot-dipped Galvanized Steel Stainless Steel (Type 304) Stainless Steel (Type 316)
ET-BSH175-PG ET-BSH175-HD ET-BSH175-SS ET-BSH175-S6
0.15 0.15 0.15 0.15
0.07 0.07 0.07 0.07
3.187 3.187 3.187 3.187
81 81 81 81
Pre-galvanized Steel Hot-dipped Galvanized Steel Stainless Steel (Type 304) Stainless Steel (Type 316)
ET-BSH338-PG ET-BSH338-HD ET-BSH338-SS ET-BSH338-S6
0.52 0.52 0.52 0.52
0.24 0.24 0.24 0.24
10
BARRIER STRIP CLAMP Dimensions The barrier strip clamp is used to mount .687 in. 17.5 mm
electro-galvanized steel, hot-dipped galvanized steel and stainless steel (304 and 316).
.937 in. 23.8 mm
.266 in. 6.8 mm
barrier strips to ExpressTray® profiles. Available in
Refer to page 61 for an application example.
1.562 in. 39.7 mm
Material
Catalogue number
Electro-galvanized Steel Hot-dipped Galvanized Steel Stainless Steel (Type 304) Stainless Steel (Type 316)
ETH-BSC-EG ETH-BSC-HD ETH-BSC-SS ETH-BSC-S6
Weight lb/ea. kg/ea.
0.07 0.07 0.07 0.07
35
0.03 0.03 0.03 0.03
25
COVER and BOTTOM INSERT Dimensions ExpressTray® covers and bottom inserts protect cables from dust build-up and provide a physical barrier in environments where cables must be L
0.625 in. 15.875 mm
protected from machinery or vandalism.
W+ .125 in./ 4.0 mm
Attach bottoms to tray using universal clamps (see page 32) and secure covers using cover clips (see page 37).
Solid Bottom Insert
Available in pre-galvanized steel in widths from 2" to 24". Available in lengths of 120" or 40". Description
Width (W) in. mm
Catalogue number Covers
Weight Catalogue number Bottoms lb/ea. kg/ea.
Weight lb/ea. kg/ea.
2 4 Solid Covers 6 and Bottoms 8 120 in. (3 meters) 12 Length 16 (L) 18 20 24
50 100 150 200 300 400 450 500 600
ETA-COVS02PG-120 1.59 ETA-COVS04PG-120 2.03 ETA-COVS06PG-120 2.45 ETA-COVS08PG-120 4.19 ETA-COVS12PG-120 5.91 ETA-COVS16PG-120 7.65 ETA-COVS18PG-120 8.42 ETA-COVS20PG-120 9.39 ETA-COVS24PG-120 11.11
0.72 0.92 1.11 1.90 2.68 3.47 3.82 4.26 5.04
ETA-BIS02PG-120 1.51 ETA-BIS04PG-120 1.93 ETA-BIS06PG-120 2.33 ETA-BIS08PG-120 3.98 ETA-BIS12PG-120 5.61 ETA-BIS16PG-120 7.27 ETA-BIS18PG-120 8.00 ETA-BIS20PG-120 8.92 ETA-BIS24PG-120 10.55
0.68 0.87 1.05 1.81 2.55 3.30 3.63 4.05 4.79
2 4 6 8 12 16 18 20 24
50 100 150 200 300 400 450 500 600
ETA-COVS02PG-40 ETA-COVS04PG-40 ETA-COVS06PG-40 ETA-COVS08PG-40 ETA-COVS12PG-40 ETA-COVS16PG-40 ETA-COVS18PG-40 ETA-COVS20PG-40 ETA-COVS24PG-40
0.53 0.68 0.82 1.40 1.97 2.55 2.81 3.13 3.70
0.24 0.31 0.37 0.63 0.89 1.16 1.27 1.42 1.68
ETA-BIS02PG-40 ETA-BIS04PG-40 ETA-BIS06PG-40 ETA-BIS08PG-40 ETA-BIS12PG-40 ETA-BIS16PG-40 ETA-BIS18PG-40 ETA-BIS20PG-40 ETA-BIS24PG-40
0.50 0.64 0.78 1.33 1.87 2.42 2.67 2.97 3.52
0.23 0.29 0.35 0.60 0.85 1.10 1.21 1.35 1.60
2 4 Vented Covers 6 and Bottoms 8 120 in. (3 meters) 12 Length 16 (L) 18 20 24
50 100 150 200 300 400 450 500 600
ETA-COVV02PG-120 1.54 ETA-COVV04PG-120 1.97 ETA-COVV06PG-120 2.38 ETA-COVV08PG-120 4.06 ETA-COVV12PG-120 5.73 ETA-COVV16PG-120 7.42 ETA-COVV18PG-120 8.17 ETA-COVV20PG-120 9.11 ETA-COVV24PG-120 10.78
0.70 0.89 1.08 1.84 2.60 3.37 3.71 4.13 4.89
ETA-BIV02PG-120 1.47 ETA-BIV04PG-120 1.87 ETA-BIV06PG-120 2.26 ETA-BIV08PG-120 3.86 ETA-BIV12PG-120 5.45 ETA-BIV16PG-120 7.05 ETA-BIV18PG-120 7.76 ETA-BIV20PG-120 8.65 ETA-BIV24PG-120 10.24
0.66 0.85 1.02 1.75 2.47 3.20 3.52 3.93 4.64
2 4 6 8 12 16 18 20 24
50 100 150 200 300 400 450 500 600
ETA-COVV02PG-40 ETA-COVV04PG-40 ETA-COVV06PG-40 ETA-COVV08PG-40 ETA-COVV12PG-40 ETA-COVV16PG-40 ETA-COVV18PG-40 ETA-COVV20PG-40 ETA-COVV24PG-40
0.23 0.30 0.36 0.61 0.87 1.12 1.24 1.38 1.63
ETA-BIV02PG-40 ETA-BIV04PG-40 ETA-BIV06PG-40 ETA-BIV08PG-40 ETA-BIV12PG-40 ETA-BIV16PG-40 ETA-BIV18PG-40 ETA-BIV20PG-40 ETA-BIV24PG-40
0.22 0.28 0.34 0.58 0.82 1.07 1.17 1.31 1.55
Solid Covers and Bottoms 40 in. (1 meter) Length (L)
Vented Covers and Bottoms 40 in. (1 meter) Length (L)
0.51 0.66 0.79 1.35 1.91 2.47 2.72 3.04 3.59
36
0.49 0.62 0.75 1.29 1.82 2.35 2.59 2.88 3.41
Available in solid or slotted design.
Refer to page 51 for an application example.
ACCESSORIES COVER CLIP Dimensions 0.157 in. 4 mm
Secure covers to tray quickly with this cover clip. Available in stainless steel (type 316), the cover
1.3 in. 33 mm
0.57 in. 14.5 mm
1.85 in. 47 mm
45˚
clip uses built-in tabs to secure the cover and to facilitate removal of the cover when required. No tools required.
0.394 in. 10 mm 0.787 in. 20 mm
Material
Catalogue number
Weight lb/ea. kg/ea.
Stainless Steel (Type 316)
ETA-CC-S6
0.10
Refer to page 51 for an application example.
20
0.05
BLACKBURN ® GROUNDING CONNECTOR Dimensions 1.39 in. 35.3 mm
. .88 in m m 23.3
.63 16.0 in. mm
Note: To ensure electrical continuity, the Blackburn® GPT-2 grounding connnector and ground wire MUST be used in all QuikLokTM Series tray applications.
Conductor Range
Catalogue number
#12 - #2 AWG
GPT-2
Weight lb/ea. kg/ea.
0.06
0.03
ETG LAY-IN GROUND LUG E T G 2 4 - L L 2 1 4 ExpressTray® Ground
2” through Lay in Lug #2 AWG through 4” depth #14 AWG
Lay in lug design easily installs onto any ExpressTray® 2” through 4” deep without any disassembly required. Approved for steel and stainless steel wire mesh trays. Accepts 12 AWG solid through 2 AWG stranded aluminum and 14 AWG solid/stranded through 2 AWG stranded copper conductors. “Slotted hook” design sits securely onto the ExpressTray® mesh intersections to restrict swiveling. Must be used on each length of QuikLokTM series tray applications to meet CSA requirements.
37
NEW
!
SUPERSTRUT® "BAT" CLIP
Attaches ExpressTray® to Stut
Material
Catalogue number
Weight lb/100 kg/100
SSF-CK535
Spring Steel with zinc phosphate finish (black)
1.20
0.55
Specifications — One piece construction — No installation tools required To install, just hook one under the strut flange and down the other wing with thumb to slip it under the flange.
— Reduces installation time to the minimum — For horizontal applications
wing push your strut
Position "BAT" Clip on outer wires of tray and opposing sides of the strut flanges
Note: "BAT" Clip shoud be used for horizontal tray/strut applications. For vertical tray/strut applications, the universal clamp (page 32) should be used to clamp ExpressTray® to strut using a bolt and spring nut (page 39).
BEAM CLAMP Dimensions 2.165 in. 55 mm
This clamp is used primarily to attach L-profile
M8 X 25 Hexagon Head Bolt
attach U- and C-profiles onto structural steel. Available
H
.25 in. 6.4 mm
ExpressTray® to steel beams. It can also be used to
in 3/4" and 1-1/8" sizes in hot-dipped galvanized steel. 1.181 in. 30 mm
Height (H) in. mm
0.750 1.125
20 30
Catalogue number
ETH-IBC3/4-HD ETH-IBC1-HD
Weight lb/ea. kg/ea.
0.44 0.47
38
0.20 0.22
10 Refer to page 61 for an application example.
ACCESSORIES SUPERSTRUT® HEXAGONAL NUT For use with Superstrut® threaded rod. Available in two sizes, 1/4" and 3/8", in electro-galvanized steel.
Size
1/4 in. hex nut 3/8 in. hex nut
Catalogue number
lb/ea.
Weight kg/ea.
E145-1/4EGC E145-3/8EGC
0.01 0.01
0.004 0.004
SUPERSTRUT® FLAT WASHER For use with Superstrut® threaded rod and hex nut. Available in 1/4" and 3/8" sizes, in electro-galvanized steel.
Size
1/4 in. flat washer 3/8 in. flat washer
Catalogue number
lb/ea.
Weight kg/ea.
E147-1/4EGC E147-3/8EGC
0.03 0.04
0.02 0.02
SUPERSTRUT® SPRING NUT For use with B-Series metal framing channel, spring nuts are offered in 1/4" and 3/8" sizes in electro-galvanized steel.
Size
1/4 in. spring nut 3/8 in. spring nut
39
Catalogue number
lb/ea.
Weight kg/ea.
B100-1/4EGC B100-3/8EGC
0.44 0.46
0.20 0.20
