Micro-USB connectors meeting USB 2.0 Standard - Octopart
Micro-USB connectors meeting USB 2.0 Standard
Note: Contact us to ascertain whether a TID number has been acquired for an individual product.
Fig.1
■Overview Extremely small highly reliable connectors complying with physical, electrical and environmental requirements of Micro-USB standard (USB 2.0). Receptacles and plugs are available in a wide variety of mounting and termination styles, allowing their use in various applications.
Reverse (Top mount)
Drop-in (Mid-mount)
Standard (Bottom mount)
■Features 1. Size reduction Compared with the standard Mini-USB connectors, the size of ZX connectors is reduced by approximately 60% while still allowing a high-speed data transfer of 480 Mbps, specified in USB 2.0.
2. Receptacle styles Two interface configurations: Micro-B and Micro-AB in standard, mid-mount and reverse mounting styles. SMT and through-hole (shell) PC board terminations.
Fig.2
3. Plug styles Corresponding to the receptacle styles, two interface configurations: Micro-A and Micro-B, with direct wire or PCB wire soldering. Several plug styles can be used for data transmission, earphone or charging applications.
USB 2.0 Hi-Speed (480 Mbps) Eye diagram measurement results: Measured with 2.4 m long USB 2.0 cable
4. Smooth mating and unmating A smooth mating and unmating operation results in less wear and a longer product life. The unique Hirose active latch mechanism produces a reliable and durable connector. Even after repeated use, the user will experience a smooth click sensation when mating the connectors. Note: The statement above only applies when using both plug and receptacles made by Hirose Electric.
200 mV/div
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
ZX Series
TP2
500ps/div Fig.3
5. Hirose was the first company to obtain a Micro-USB certification (TID number).
2016.9③
1
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Product Specifications Ratings
Current rating
1A (per contact) or
Voltage rating
30V AC
1.8A (contacts No. 1 and 5) and
Operating temperature range
-30°C to +85°C (Note1)
0.5A (contacts No. 2, 3, and 4)
Storage temperature range
-30°C to +60°C
Item
Specification
Conditions
1. Contact resistance
30mø max.
100mA
2. Withstanding voltage
No flashover or insulation breakdown
100V AC / 1 minute
3. Capacitance
2pF max.
Between adjacent contacts at 1,000Hz (AC voltage)
4. Durability
Contact resistance : Rise from initial value of 10mø max. 10,000 cycles
5. Total insertion/removal force
Insertion force : 35N max., Removal force : 8N min.
Mated with corresponding connector
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
Note1 : Includes temperature rise caused by current flow. Note2 : Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown.
■Materials / Finish ●Receptacles Part
Material
Finish
Remarks
Insulator
LCP
Micro-B: Black, Micro-AB: Gray
UL94V-0
Contacts
Copper alloy
Selective gold plated
---------------
Shell
Stainless steel
Tin alloy plating
---------------
●Plugs Part
Material
Finish
Remarks
Insulator
LCP
Micro-B: Black, Micro-AB: Gray
UL94V-0
Contacts
Copper alloy
Selective gold plated
---------------
Shell
Stainless steel
Tin alloy plating
---------------
■Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders.
●Receptacles
ZX 62 RD - B - 5 P * 8 q
w
e
t
r
y
u
i
qSeries name wTermination style
●Plugs
ZX 40 - B - 5 S * - UNIT q
w
r
t
y
u
o
ZX 40 - B - SLDA q
Interface Micro-A
Micro-B
w
r
Receptacle
o
Plug
eBoard mounting style (Receptacles)
ZX 10's : Right-angle PCB wire, SMT 20's : Straight, PCB wire 40's : Direct wire 60's : Right-angle, PCB wire 80's : Cradle SMT Standard (Bottom mount) Standard (Bottom mount) through hole Reverse (Top mount) Reverse (Top mount) through hole Drop-in (Mid-mount) Micro-A Micro-B Micro-AB 5 Receptacle- Male Plug – Female
Blank D R RD M rMating side configuration A B AB tNumber of contacts yContact type P S uSerial No. iShell termination style – Blank SMT Receptacles 8 Through hole (solder tab length: 0.8mm) oComponents-plugs UNIT Assembly (Insulator/contact/lock) Cover (Note 1) Note 1 : Classifiers such as A, B, and C are entered for *.
Micro-AB
2
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Configurations Mating side configuration
Type
Part No.
3D Image
Page
SMT
ZX62-B-5PA(33)
4
SMT + DIP
ZX62D-B-5PA8(30)
4
Reverse
SMT
ZX62R-B-5P(30)
5
Drop-in
SMT
ZX62M-B-5P(30)
5
SMT
ZX62-AB-5PA(31)
6
SMT + DIP
ZX62D-AB-5P8(30)
6
SMT
ZX62R-AB-5P(30)
7
SMT + DIP
ZX62RD-AB-5P8(30)
7
Standard
R e c e p t a c l e s
Standard
Micro-AB
P l u g s
Reverse
Cradles
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
Micro-B
Direct wire soldering
Assembly (insulator/contacts/lock) Cover-top Cover-bottom
PCB wire soldering (straight, through hole)
Assembly (insulator/contacts/lock) Cover
PCB wire soldering (SMT)
Assembly (insulator/contacts/lock) Cover-top Cover- bottom
PCB wire soldering (SMT)
Assembly (insulator/contacts/lock) Cover
Micro-A
Direct wire soldering
Assembly (insulator/contacts/lock) Cover-top Cover- bottom
Micro-B
SMT + DIP
Micro-B
: ZX40-B-5S-UNIT(31)
9 and 10
: ZX40-B-SLDA : ZX40-SLDB
: ZX20-B-5S-UNIT(30)
11
: ZX20-B-SLDC : ZX64-B-5S-UNIT(31) 12 and 13
: ZX64-B-SLDA : ZX64-SLDB : ZX64-B-5S-UNIT(31)
12 and 13
: ZX64-B-SLDC : ZX40-A-5S-UNIT(30) 14 and 15
: ZX40-A-SLDA : ZX40-SLDB
ZX80-B-5S(30)
With lock
16
ZX80-B-5SA(30)
Without lock
16
Note : 1 Part numbers in the Plugs section of the above table list the Assembly (insulator/contacts/locks) and the corresponding Shields/Covers. Note : 2 Optional Printed Circuit boards for the Plugs are shown for reference only. Not supplied with applicable connectors. Note : 3 The color of the insulators body in the Assembly (insulator/contacts/lock) shown in the 3D Image column above is blue for clarity. Refer to the Materials (Page 2) for correct colors.
3
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Receptacles
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
●Micro B - Standard (Bottom mount), Shell SMT Part No.
HRS No.
Packaging
ZX62-B-5PA(33)
242-0033-8 33
3,500pcs/reel
BRecommended PCB mounting pattern 8.3 4.1 2.6
0.6
7.5
4.3 6.2 9.8
2.5
1.45
0.5
5
2.8
1.6
3.35
1.35 1.9
No.5 1.3 0.4
No.1 NO CONDUCTIVE TRACES
PCB EDGE No.1
7.9
No.5
2.15
All dimensions : mm
●Micro B - Standard (Bottom mount), Shell through hole Part No.
HRS No.
Packaging
ZX62D-B-5PA8(30)
242-0056-3 30
2,000pcs/reel
BRecommended PCB mounting pattern 4.85 2.6 0.65 0.4 D) No.1
1.05(LAND) 0.65(TH) No.5 1.35
AN
7.5
PCB EDGE
5
2.5
0.5 4.1 5.2 7.2 9.4
1.3
R0.325(TH) 0.5(TH)
0.6
2.75
NO CONDUCTIVE TRACES (TH) .3 R0
1.5(TH) 1.9
2.9
R0.5(LAND)
R0.325(TH)
No.1
4.85 7.2
0.8
5(L
3.35
.52
0.2 0.1
1.25(LAND) 0.85(TH)
R0
2.15
2.9
No.5
All dimensions : mm
4
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Receptacles Part No.
HRS No.
Packaging
ZX62R-B-5P(30)
242-0028-8 30
2,000pcs/reel
BRecommended PCB8.3 mounting pattern 4.1 2.6 1.3
No.1
No.5
1.35
0.5 2.9 3.9 5.6 6.6 9.8
0.6
No.1
5
2.5
1.45
1.9
2
3.35
0.4
0.43
No.5
NO CONDUCTIVE TRACES
2.15
7.5 8.8
All dimensions : mm
●Micro B - Drop-in (Mid-mount), Shell SMT Part No.
HRS No.
Packaging
ZX62M-B-5P(30)
242-0024-7 30
1,500pcs/reel
11.5 7.5
2.74 4.3
5 5.3
2.4
4.8
1.9
3.6
1.05
0.6
0.4 1.3 2.6 6.9 7.8 8.8 12
PCB EDGE
1.25
2.4
1.4
No.5
3
1.5
4.3
0.
7.15
1.9
7.5
C
.4
R0
No.1
4.7 2
1.23
BRecommended PCB mounting pattern
5.15
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
●Micro B - Reverse (Top mount) Shell SMT
No.5
No.1 0.25 1.3 2.6 4.7
All dimensions : mm
5
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Receptacles
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
●Micro AB - Standard (Bottom mount), Shell SMT Part No.
HRS No.
Packaging
ZX62-AB-5PA(31)
242-0045-7 31
3,500pcs/reel
8.3 4.1 2.6 1.3
No.1
No.5
3.35
1.6
0.4
1.35
BRecommended PCB mounting pattern
0.6
5
2.5
2.8
1.9
0.5 4.3 6.2 9.8
1.45
7.5
PCB EDGE NO CONDUCTIVE TRACES
No.1
No.5
8.8
2.15
All dimensions : mm
●Micro AB - Standard (Bottom mount), Shell through hole Part No.
HRS No.
Packaging
ZX62D-AB-5P8(30)
242-0027-5 30
2,000pcs/reel
0.4 No.1
1.05(LAND) 0.65(TH) NO CONDUCTIVE TRACES No.5 1.35 1.5 1.7
(0.325) (0.5)
0.5 4.1 5.2 7.35(TH) 9(TH) 9.4
0.6
5
2.025
3.125
2.5
1.3 1.5(TH) 1.9
R0.5(LAND) PCB EDGE
7.5
2.625
R0.25(TH)
2.8
R0.3(TH)
No.1
4.45 8.35
0.6
0.85(TH)
R0.45(LAND)
4.45 2.6 1.3
3.475
3.125
1.25(LAND)
BRecommended PCB mounting pattern
No.5
All dimensions: mm
6
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Receptacles Part No.
HRS No.
Packaging
ZX62R-AB-5P(30)
242-0035-3 30
2,000pcs/reel
BRecommended PCB mounting pattern 8.3 4.1 2.6 1.3
No.5 NO CONDUCTIVE TRACES
No.1
1.45 0.43
0.5 2.9 0.85 4.75 6.6 9.8
7.5
0.6
5
2.5
1.9
3.35
1.6
1.35
0.4
PCB EDGE No.5
.4
R0
4-
8.8
No.1
2.15
All dimensions : mm
●Micro AB - Reverse (Top mount), Shell through hole Part No.
HRS No.
Packaging
ZX62RD-AB-5P8(30)
242-0025-0 30
2,000pcs/reel
BRecommended PCB mounting pattern R0.45(LAND)
No.1
R0.2MAX 1.05(LAND) 0.65(TH)
1.35 1.5 1.7
0.4
NO CONDUCTIVE TRACES
3.475
7.5
No.1
0.6
5
2.5
No.5
R0 .5( LA ND )
4.45 8.35
0.6
1.9
4.75
0.85
1.5(TH)
2.9
1.3
(TH) (0.325) R0.3 (0.5)
2.625
No.5
1.25(LAND) 0.85(TH)
R0.25(TH)
9.4 9(TH) 7.35(TH) 6.6 4.45 2.6 1.3
3.125 0.555
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
●Micro AB - Reverse (Top mount), Shell SMT
2.025
3.125
PCB EDGE
All dimensions: mm
7
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
Plugs – assembled (not-terminated, without overmold)
Components
ZX40 - Direct wire soldering ZX40-*-SLDA Cover-top
ZX40-*-5S-UNIT Assembly (insulator/ contacts/lock) *No PCB required
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
ZX40-SLDB Cover-bottom
ZX20 - PCB wire soldering ZX20-*-SLDC Cover
ZX20-*-5S-UNIT Assembly (insulator/contacts/lock) *Vertical through hole PCB termination
ZX64 - PCB wire soldering ZX64-*-SLDA Cover-top
ZX64-*-5S-UNIT Assembly (insulator/ contacts/lock) *Right angle through hole PCB termination
ZX64-SLDB Cover-bottom
8
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Plugs ●Micro B - Assembly (insulator/contacts/lock) – Direct wire soldering Part No.
HRS No.
Packaging
ZX40-B-5S-UNIT(31)
242-0002-4 31
4,000pcs/reel
14.1 7.9 No.5
No.1
4.2
All dimensions : mm
●Micro B - Component, Cover-top - Direct wire soldering HRS No.
Packaging
ZX40-B-SLDA
242-0003-7
4,000 pcs/reel
22.6
Part No.
6.85
8 1.8
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
Contact HRS for Cable Termination Procedure Manual.
All dimensions : mm
9
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Plugs
16.2
16.2
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
●Micro A, Micro B - Component, Cover-bottom - Direct wire soldering
8
8
All dimensions : mm
ZX40-SLDB(3.3)
ZX40-SLDB Part No.
HRS No.
ZX40-SLDB
242-0004-0
ZX40-SLDB(3.3)
242-0023-4
Packaging
Cable dia. Ø3.8
4,000pcs/reel
Ø3.3
22.6
●Assembled
6.85
1.8
4.75
8.6
All dimensions : mm
10
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Plugs ●Micro B - Assembly (insulator/contacts/lock) - Vertical through hole PCB wire soldering (non-direct) Part No.
HRS No.
Packaging
ZX20-B-5S-UNIT(30)
242-0012-8 30
4,000pcs/pks
Contact HRS for Cable Termination Procedure Manual.
1 1.4
PCB mounting pattern
gh
ho
le)
12.2
*PCB required (not supplied) Max. thickness: 0.6mm
(Th 0.7
No.5 1(Land)
10.25
R0
7.9 No.1 0.35 1.55
No.5 3.975
d)
.3(T
8.2
1.6(Land)
1.55
e) hol hro
(Lan
ugh
1.3 2.6
R0.5
1.2(Through hole)
4.2
5-Ø
)
nd
0.6(Through hole)
La
.1(
No.1
rou
Ø1 5-
All dimensions : mm
●Micro B - Component, Cover - through hole HRS No.
Packaging
ZX20-B-SLDC
242-0022-1
4,000 pcs/reel
12.1
8.2 2-0.2
1.1
Part No.
●Assembled
8.2 2.6 1.3
2-0.2
1 1.4
5-0.15
6.85
6.85
Assembly (insulator/contacts/lock)
0.6
12.2
1.8
8
Cover
1.8
0.35 1.55
8.4
0.6
4.4
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
2.6 1.3 5-0.15
All dimensions : mm
11
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Plugs ●Micro B - Assembly (insulator/contacts/lock) - Right angle SMT Part No.
HRS No.
Packaging
ZX64-B-5S-UNIT(31)
242-0009-3 31
1 piece
Contact HRS for Cable Termination Procedure Manual. 2.6 1.3
16.1
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
5-0.15
PCB mounting pattern
1.5
6
*PCB required (not supplied) Max. thickness: 1.0mm
7.9
1.3 No.5
2.6
No.1
No.1
3.7
0.35
1.1
0.5
No.5
6.8
All dimensions : mm
●Micro B - Component, Cover-top – Right angle SMT HRS No.
Packaging
ZX64-B-SLDA
242-0013-0
4,000 pcs/reel
24.7
Part No.
6.85
1.8
8
All dimensions : mm
12
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Plugs ●Micro B - Component, Cover-bottom - Right angle SMT HRS No.
Packaging
242-0049-8
4,000 pcs/reel
24.7
●Assembled
8
Assembly (insulator/contacts/lock)
Cover-top
1.8
4.1
6.85 8.4
Cover-bottom
All dimensions : mm
●Micro B - Component, Shell/cover – Right angle SMT Part No.
HRS No.
Packaging
ZX64-B-SLDC
242-0018-4
4,000 pcs/reel
6.85
Shell/cover, without cable clamp This shell/cover does not require ZX64-SLDB.
8
16.1
16.1
1.8
●Assembled
8.4
Assembly (insulator/contacts/lock)
Cover-top
1.8
6.85
4.1
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
18.25
Part No. ZX64-SLDB
Cover-bottom
All dimensions : mm
13
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Plugs ●Micro A - Assembly (insulator/contacts/lock) - Direct wire soldering Part No.
HRS No.
Packaging
ZX40-A-5S-UNIT(30)
242-0010-2 30
1 piece
12.4
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
Contact HRS for Cable Termination Procedure Manual.
Contacts
7.9
No.1
4.2
No.5
Insulator body (color grey)
All dimensions : mm
●Micro A - Component, Cover-top - Direct wire soldering HRS No.
Packaging
242-0011-5
4,000pcs/reel
22.6
Part No. ZX40-A-SLDA
6.85
1.8
8
All dimensions : mm
14
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Plugs
16.2
16.2
8
8
All dimensions : mm
ZX40-SLDB Part No.
ZX40-SLDB(3.3)
HRS No.
ZX40-SLDB
242-0004-0
ZX40-SLDB(3.3)
242-0023-4
Packaging 4,000pcs/reel
Cable dia. Ø3.8 Ø3.3
22.6
●Assembled
6.85 Assembly (insulator/contacts/lock)
Cover-top
1.8
8.6 4.75
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
●Micro A, Micro B - Component, Cover-bottom - Direct wire soldering
Cover-bottom
All dimensions : mm
15
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Plug-Vertical, cradle mount, Shell through hole ●Micro B, with lock 6.65
2-0.2
2.6 1.3 5-0.15 No.1
HRS No.
Packaging
ZX80-B-5S(30)
242-0017-1 30
100pcs/pks
6
Part No.
0.7
R1.
3.52 2.32 0.37
3.15
No.5
1 1.86
2.78 2.42 1.88
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
6.85 8.55
2.5 7.1
16.55 20.55
13
1.15
All dimensions : mm
●Micro B, without lock 6.65
2-0.2
2.6 1.3 5-0.15 No.1
HRS No.
Packaging
ZX80-B-5SA(30)
242-0019-7 30
100 pcs/pks
BPCB mounting pattern
13
0.5(Through hole) 1.1(Land) 2.6 6.65 16.55
Contact No.5
1.86
.55 0.4 1.3
2.2(Land)
R0
1.6(Through hole)
2.9 2.2
8-
Contact No.1
16
1.15
3.15
0.37
5
e) ol
.2
R0
H 2(
2.
8-
Ø 2-
1.1(Land) 0.5(Through hole)
0.7
2.5 7.1
16.55 20.55
1.3(Through hole) 1.9(Land)
Part No.
6 R1.
3.52 2.32 0.37
3.15
No.5
1 1.86
2.78 2.42 1.88
6.85 8.55
All dimensions : mm
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
BPackaging Specifications ●Embossed carrier tape dimensions Unreeling direction
C
D
0.5 Ø1 .5
E
2
3 Ø1
1.75
4
●Reel Dimensions
Unreeling direction
Ø3
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
A
B
80
Part No. Part No.
ZX62-B-5PA(33) ZX62-AB-5PA(31) ZX62M-B-5P(30) Other
A dimension 24 24 24 16
B dimension 11.5 11.5 11.5 7.5
ZX62-B-5PA(33) ZX62-AB-5PA(31) ZX62M-B-5P(30) Other
D dimension 30.4 30.4 30.4 22.4
E dimension 24.4 24.4 24.4 16.4
BRecommended Temperature Profile - Receptacles ●Using lead-free solder paste
The temperature profile is based on the left conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume/ thickness and board size/thickness. Contact your solder paste and equipment manufacturer for specific recommendations.
(ç) 240ç 230çmin
250 200
180ç
150
150ç
100 60S
50
30S
Note 1 : Up to 2 cycles of Reflow soldering are possible under the same conditions, provided that there is a return to normal temperature between the first and second cycle. Note 2 : The temperature profile indicates the board surface temperature at the point of contacts with the connector terminals.
BPrecautions 1. Exercise care when handling the connectors. Do not subject them to excessive external forces when mating/un-mating. 2. Mate and un-mate as intended, holding by the overmolded body, in the correct direction. Do not un-mate by pulling on the cable. 3. Some tooling marks may be visible on the surfaces of receptacle (shell/cover). No form/fit or function is affected. 4. Appearance of the surface finishes on the receptacles may vary between production runs. No affect on form, fit or function.
17
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
MEMO :
18
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
MEMO :
19
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
Powered by TCPDF (www.tcpdf.org)
USA: HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE 2300 Warrenville Road, Suite 150, Downers Grove, IL 60515 Phone : +1-630-282-6700 http://www.hirose.com/us/
USA: HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE 2841 Junction Ave, Suite 200 San Jose, CA. 95134 Phone : +1-408-253-9640 Fax : +1-408-253-9641 http://www.hirose.com/us/
USA: HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) 17197 N. Laurel Park Drive, Suite 253, Livonia, MI 48152 Phone : +1-734-542-9963 Fax : +1-734-542-9964 http://www.hirose.com/us/
THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg #8 1101 CC Amsterdam Z-O Phone : +31-20-6557460 Fax : +31-20-6557469 http://www.hirose.com/eu/
GERMANY: HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH Schoenbergstr. 20, 73760 ostfildern Phone : +49-711-456002-1 Fax : +49-711-456002-299 http://www.hirose.com/eu/
GERMANY: HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE Neumeyerstrasse 22-26, 90411 Nurnberg Phone : +49-911 32 68 89 63 Fax : +49-911 32 68 89 69 http://www.hirose.com/eu/
GERMANY: HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE Bayernstr. 3, Haus C 30855 Langenhagen, Germany Phone : +49-511 97 82 61 30 Fax : +49-511 97 82 61 35 http://www.hirose.com/eu/
FRANCE: HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE Regus La Garenne Colombes,Place de La Belgique, 71 Boulevard National La Garenne Colombes, 92250, France Phone : +33 (0) 1 7082 3170 Fax : +33 (1) 7082 3101 http://www.hirose.com/eu/
UNITED KINGDOM: HIROSE ELECTRIC EUROPE BV (UK BRANCH) 4 Newton Court, Kelvin Drive, Knowlhill, Milton Keynes, MK5 8NH Phone : +44-1908 202050 Fax : +44-1908 202058 http://www.hirose.com/eu/
CHINA: HIROSE ELECTRIC (SHANGHAI) CO., LTD. 1601, Henderson Metropolitan, NO.300, East Nanjing Road, Huangpu District, Shanghai, China 200001 Phone : +86-21-6391-3355 Fax : +86-21-6391-3335 http://www.hirose.com/cn/
CHINA: HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH A1001, Ocean International Center, Building 56# East 4th Ring Middle Road, ChaoYang District, Beijing, 100025 Phone : +86-10-5165-9332 Fax : +86-10-5908-1381 http://www.hirose.com/cn/
CHINA: HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, 5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008 Phone : +86-755-8207-0851 Fax : +86-755-8207-0873 http://www.hirose.com/cn/
HONG KONG: HIROSE ELECTRIC HONGKONG TRADING CO., LTD. Room 1001, West Wing, Tsim Sha Tsui Centre, 66 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +852-2803-5338 Fax : +852-2591-6560 http://www.hirose.com/hk/
TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. 103 8F, No.87, Zhengzhou Rd., Taipei Phone : +886-2-2555-7377 Fax : +886-2-2555-7350 http://www.hirose.com/tw/
KOREA: HIROSE KOREA CO.,LTD. 250, Huimanggongwon-ro, Siheung-si, Gyeonggi-do, Korea, 15083 Phone : +82-31-496-7000 or 7124 Fax : +82-31-496-7100 http://www.hirose.co.kr/
SINGAPORE: INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE HIROSE ELECTRIC SINGAPORE PTE. LTD. 10 Anson Road #26-16, International Plaza Office NO.552, Regus-Green Boulevard, Level5, Tower C, Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India 079903, Singapore Phone : +91-12-660-8018 Phone : +65-6324-6113 Fax : +91-120-4804949 Fax : +65-6324-6123 http://www.hirose.com/sg/ http://www.hirose.com/sg/ MALAYSIA: PENANG REPRESENTATIVE OFFICE 1-21-01, Suntech @ Penang Cybercity (1164), Lintang Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia. Phone : +604-619-2564 Fax : +604-619-2574 http://www.hirose.com/sg/
®
20
INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma Gandhi (MG) Road, Bangalore 560 001, Karnataka, India Phone : +91-80-4120 1907 Fax : +91-80-4120 9908 http://www.hirose.com/sg/
THAILAND: BANGKOK OFFICE (REPRESENTATIVE OFFICE) Unit 4703, 47th FL., 1 Empire Tower, South Sathorn Road, Yannawa, Sathorn, Bangkok 10120 Thailand Phone : +66-2-686-1255 Fax : +66-2-686-3433 http://www.hirose.com/sg/
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 09/2016. Contents are subject to change without notice for the purpose of improvements.
Note: Contact us to ascertain whether a TID number has been acquired for an individual product.
Fig.1
■Overview Extremely small highly reliable connectors complying with physical, electrical and environmental requirements of Micro-USB standard (USB 2.0). Receptacles and plugs are available in a wide variety of mounting and termination styles, allowing their use in various applications.
Reverse (Top mount)
Drop-in (Mid-mount)
Standard (Bottom mount)
■Features 1. Size reduction Compared with the standard Mini-USB connectors, the size of ZX connectors is reduced by approximately 60% while still allowing a high-speed data transfer of 480 Mbps, specified in USB 2.0.
2. Receptacle styles Two interface configurations: Micro-B and Micro-AB in standard, mid-mount and reverse mounting styles. SMT and through-hole (shell) PC board terminations.
Fig.2
3. Plug styles Corresponding to the receptacle styles, two interface configurations: Micro-A and Micro-B, with direct wire or PCB wire soldering. Several plug styles can be used for data transmission, earphone or charging applications.
USB 2.0 Hi-Speed (480 Mbps) Eye diagram measurement results: Measured with 2.4 m long USB 2.0 cable
4. Smooth mating and unmating A smooth mating and unmating operation results in less wear and a longer product life. The unique Hirose active latch mechanism produces a reliable and durable connector. Even after repeated use, the user will experience a smooth click sensation when mating the connectors. Note: The statement above only applies when using both plug and receptacles made by Hirose Electric.
200 mV/div
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
ZX Series
TP2
500ps/div Fig.3
5. Hirose was the first company to obtain a Micro-USB certification (TID number).
2016.9③
1
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Product Specifications Ratings
Current rating
1A (per contact) or
Voltage rating
30V AC
1.8A (contacts No. 1 and 5) and
Operating temperature range
-30°C to +85°C (Note1)
0.5A (contacts No. 2, 3, and 4)
Storage temperature range
-30°C to +60°C
Item
Specification
Conditions
1. Contact resistance
30mø max.
100mA
2. Withstanding voltage
No flashover or insulation breakdown
100V AC / 1 minute
3. Capacitance
2pF max.
Between adjacent contacts at 1,000Hz (AC voltage)
4. Durability
Contact resistance : Rise from initial value of 10mø max. 10,000 cycles
5. Total insertion/removal force
Insertion force : 35N max., Removal force : 8N min.
Mated with corresponding connector
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
Note1 : Includes temperature rise caused by current flow. Note2 : Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown.
■Materials / Finish ●Receptacles Part
Material
Finish
Remarks
Insulator
LCP
Micro-B: Black, Micro-AB: Gray
UL94V-0
Contacts
Copper alloy
Selective gold plated
---------------
Shell
Stainless steel
Tin alloy plating
---------------
●Plugs Part
Material
Finish
Remarks
Insulator
LCP
Micro-B: Black, Micro-AB: Gray
UL94V-0
Contacts
Copper alloy
Selective gold plated
---------------
Shell
Stainless steel
Tin alloy plating
---------------
■Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders.
●Receptacles
ZX 62 RD - B - 5 P * 8 q
w
e
t
r
y
u
i
qSeries name wTermination style
●Plugs
ZX 40 - B - 5 S * - UNIT q
w
r
t
y
u
o
ZX 40 - B - SLDA q
Interface Micro-A
Micro-B
w
r
Receptacle
o
Plug
eBoard mounting style (Receptacles)
ZX 10's : Right-angle PCB wire, SMT 20's : Straight, PCB wire 40's : Direct wire 60's : Right-angle, PCB wire 80's : Cradle SMT Standard (Bottom mount) Standard (Bottom mount) through hole Reverse (Top mount) Reverse (Top mount) through hole Drop-in (Mid-mount) Micro-A Micro-B Micro-AB 5 Receptacle- Male Plug – Female
Blank D R RD M rMating side configuration A B AB tNumber of contacts yContact type P S uSerial No. iShell termination style – Blank SMT Receptacles 8 Through hole (solder tab length: 0.8mm) oComponents-plugs UNIT Assembly (Insulator/contact/lock) Cover (Note 1) Note 1 : Classifiers such as A, B, and C are entered for *.
Micro-AB
2
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Configurations Mating side configuration
Type
Part No.
3D Image
Page
SMT
ZX62-B-5PA(33)
4
SMT + DIP
ZX62D-B-5PA8(30)
4
Reverse
SMT
ZX62R-B-5P(30)
5
Drop-in
SMT
ZX62M-B-5P(30)
5
SMT
ZX62-AB-5PA(31)
6
SMT + DIP
ZX62D-AB-5P8(30)
6
SMT
ZX62R-AB-5P(30)
7
SMT + DIP
ZX62RD-AB-5P8(30)
7
Standard
R e c e p t a c l e s
Standard
Micro-AB
P l u g s
Reverse
Cradles
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
Micro-B
Direct wire soldering
Assembly (insulator/contacts/lock) Cover-top Cover-bottom
PCB wire soldering (straight, through hole)
Assembly (insulator/contacts/lock) Cover
PCB wire soldering (SMT)
Assembly (insulator/contacts/lock) Cover-top Cover- bottom
PCB wire soldering (SMT)
Assembly (insulator/contacts/lock) Cover
Micro-A
Direct wire soldering
Assembly (insulator/contacts/lock) Cover-top Cover- bottom
Micro-B
SMT + DIP
Micro-B
: ZX40-B-5S-UNIT(31)
9 and 10
: ZX40-B-SLDA : ZX40-SLDB
: ZX20-B-5S-UNIT(30)
11
: ZX20-B-SLDC : ZX64-B-5S-UNIT(31) 12 and 13
: ZX64-B-SLDA : ZX64-SLDB : ZX64-B-5S-UNIT(31)
12 and 13
: ZX64-B-SLDC : ZX40-A-5S-UNIT(30) 14 and 15
: ZX40-A-SLDA : ZX40-SLDB
ZX80-B-5S(30)
With lock
16
ZX80-B-5SA(30)
Without lock
16
Note : 1 Part numbers in the Plugs section of the above table list the Assembly (insulator/contacts/locks) and the corresponding Shields/Covers. Note : 2 Optional Printed Circuit boards for the Plugs are shown for reference only. Not supplied with applicable connectors. Note : 3 The color of the insulators body in the Assembly (insulator/contacts/lock) shown in the 3D Image column above is blue for clarity. Refer to the Materials (Page 2) for correct colors.
3
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Receptacles
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
●Micro B - Standard (Bottom mount), Shell SMT Part No.
HRS No.
Packaging
ZX62-B-5PA(33)
242-0033-8 33
3,500pcs/reel
BRecommended PCB mounting pattern 8.3 4.1 2.6
0.6
7.5
4.3 6.2 9.8
2.5
1.45
0.5
5
2.8
1.6
3.35
1.35 1.9
No.5 1.3 0.4
No.1 NO CONDUCTIVE TRACES
PCB EDGE No.1
7.9
No.5
2.15
All dimensions : mm
●Micro B - Standard (Bottom mount), Shell through hole Part No.
HRS No.
Packaging
ZX62D-B-5PA8(30)
242-0056-3 30
2,000pcs/reel
BRecommended PCB mounting pattern 4.85 2.6 0.65 0.4 D) No.1
1.05(LAND) 0.65(TH) No.5 1.35
AN
7.5
PCB EDGE
5
2.5
0.5 4.1 5.2 7.2 9.4
1.3
R0.325(TH) 0.5(TH)
0.6
2.75
NO CONDUCTIVE TRACES (TH) .3 R0
1.5(TH) 1.9
2.9
R0.5(LAND)
R0.325(TH)
No.1
4.85 7.2
0.8
5(L
3.35
.52
0.2 0.1
1.25(LAND) 0.85(TH)
R0
2.15
2.9
No.5
All dimensions : mm
4
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Receptacles Part No.
HRS No.
Packaging
ZX62R-B-5P(30)
242-0028-8 30
2,000pcs/reel
BRecommended PCB8.3 mounting pattern 4.1 2.6 1.3
No.1
No.5
1.35
0.5 2.9 3.9 5.6 6.6 9.8
0.6
No.1
5
2.5
1.45
1.9
2
3.35
0.4
0.43
No.5
NO CONDUCTIVE TRACES
2.15
7.5 8.8
All dimensions : mm
●Micro B - Drop-in (Mid-mount), Shell SMT Part No.
HRS No.
Packaging
ZX62M-B-5P(30)
242-0024-7 30
1,500pcs/reel
11.5 7.5
2.74 4.3
5 5.3
2.4
4.8
1.9
3.6
1.05
0.6
0.4 1.3 2.6 6.9 7.8 8.8 12
PCB EDGE
1.25
2.4
1.4
No.5
3
1.5
4.3
0.
7.15
1.9
7.5
C
.4
R0
No.1
4.7 2
1.23
BRecommended PCB mounting pattern
5.15
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
●Micro B - Reverse (Top mount) Shell SMT
No.5
No.1 0.25 1.3 2.6 4.7
All dimensions : mm
5
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Receptacles
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
●Micro AB - Standard (Bottom mount), Shell SMT Part No.
HRS No.
Packaging
ZX62-AB-5PA(31)
242-0045-7 31
3,500pcs/reel
8.3 4.1 2.6 1.3
No.1
No.5
3.35
1.6
0.4
1.35
BRecommended PCB mounting pattern
0.6
5
2.5
2.8
1.9
0.5 4.3 6.2 9.8
1.45
7.5
PCB EDGE NO CONDUCTIVE TRACES
No.1
No.5
8.8
2.15
All dimensions : mm
●Micro AB - Standard (Bottom mount), Shell through hole Part No.
HRS No.
Packaging
ZX62D-AB-5P8(30)
242-0027-5 30
2,000pcs/reel
0.4 No.1
1.05(LAND) 0.65(TH) NO CONDUCTIVE TRACES No.5 1.35 1.5 1.7
(0.325) (0.5)
0.5 4.1 5.2 7.35(TH) 9(TH) 9.4
0.6
5
2.025
3.125
2.5
1.3 1.5(TH) 1.9
R0.5(LAND) PCB EDGE
7.5
2.625
R0.25(TH)
2.8
R0.3(TH)
No.1
4.45 8.35
0.6
0.85(TH)
R0.45(LAND)
4.45 2.6 1.3
3.475
3.125
1.25(LAND)
BRecommended PCB mounting pattern
No.5
All dimensions: mm
6
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Receptacles Part No.
HRS No.
Packaging
ZX62R-AB-5P(30)
242-0035-3 30
2,000pcs/reel
BRecommended PCB mounting pattern 8.3 4.1 2.6 1.3
No.5 NO CONDUCTIVE TRACES
No.1
1.45 0.43
0.5 2.9 0.85 4.75 6.6 9.8
7.5
0.6
5
2.5
1.9
3.35
1.6
1.35
0.4
PCB EDGE No.5
.4
R0
4-
8.8
No.1
2.15
All dimensions : mm
●Micro AB - Reverse (Top mount), Shell through hole Part No.
HRS No.
Packaging
ZX62RD-AB-5P8(30)
242-0025-0 30
2,000pcs/reel
BRecommended PCB mounting pattern R0.45(LAND)
No.1
R0.2MAX 1.05(LAND) 0.65(TH)
1.35 1.5 1.7
0.4
NO CONDUCTIVE TRACES
3.475
7.5
No.1
0.6
5
2.5
No.5
R0 .5( LA ND )
4.45 8.35
0.6
1.9
4.75
0.85
1.5(TH)
2.9
1.3
(TH) (0.325) R0.3 (0.5)
2.625
No.5
1.25(LAND) 0.85(TH)
R0.25(TH)
9.4 9(TH) 7.35(TH) 6.6 4.45 2.6 1.3
3.125 0.555
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
●Micro AB - Reverse (Top mount), Shell SMT
2.025
3.125
PCB EDGE
All dimensions: mm
7
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
Plugs – assembled (not-terminated, without overmold)
Components
ZX40 - Direct wire soldering ZX40-*-SLDA Cover-top
ZX40-*-5S-UNIT Assembly (insulator/ contacts/lock) *No PCB required
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
ZX40-SLDB Cover-bottom
ZX20 - PCB wire soldering ZX20-*-SLDC Cover
ZX20-*-5S-UNIT Assembly (insulator/contacts/lock) *Vertical through hole PCB termination
ZX64 - PCB wire soldering ZX64-*-SLDA Cover-top
ZX64-*-5S-UNIT Assembly (insulator/ contacts/lock) *Right angle through hole PCB termination
ZX64-SLDB Cover-bottom
8
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Plugs ●Micro B - Assembly (insulator/contacts/lock) – Direct wire soldering Part No.
HRS No.
Packaging
ZX40-B-5S-UNIT(31)
242-0002-4 31
4,000pcs/reel
14.1 7.9 No.5
No.1
4.2
All dimensions : mm
●Micro B - Component, Cover-top - Direct wire soldering HRS No.
Packaging
ZX40-B-SLDA
242-0003-7
4,000 pcs/reel
22.6
Part No.
6.85
8 1.8
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
Contact HRS for Cable Termination Procedure Manual.
All dimensions : mm
9
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Plugs
16.2
16.2
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
●Micro A, Micro B - Component, Cover-bottom - Direct wire soldering
8
8
All dimensions : mm
ZX40-SLDB(3.3)
ZX40-SLDB Part No.
HRS No.
ZX40-SLDB
242-0004-0
ZX40-SLDB(3.3)
242-0023-4
Packaging
Cable dia. Ø3.8
4,000pcs/reel
Ø3.3
22.6
●Assembled
6.85
1.8
4.75
8.6
All dimensions : mm
10
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Plugs ●Micro B - Assembly (insulator/contacts/lock) - Vertical through hole PCB wire soldering (non-direct) Part No.
HRS No.
Packaging
ZX20-B-5S-UNIT(30)
242-0012-8 30
4,000pcs/pks
Contact HRS for Cable Termination Procedure Manual.
1 1.4
PCB mounting pattern
gh
ho
le)
12.2
*PCB required (not supplied) Max. thickness: 0.6mm
(Th 0.7
No.5 1(Land)
10.25
R0
7.9 No.1 0.35 1.55
No.5 3.975
d)
.3(T
8.2
1.6(Land)
1.55
e) hol hro
(Lan
ugh
1.3 2.6
R0.5
1.2(Through hole)
4.2
5-Ø
)
nd
0.6(Through hole)
La
.1(
No.1
rou
Ø1 5-
All dimensions : mm
●Micro B - Component, Cover - through hole HRS No.
Packaging
ZX20-B-SLDC
242-0022-1
4,000 pcs/reel
12.1
8.2 2-0.2
1.1
Part No.
●Assembled
8.2 2.6 1.3
2-0.2
1 1.4
5-0.15
6.85
6.85
Assembly (insulator/contacts/lock)
0.6
12.2
1.8
8
Cover
1.8
0.35 1.55
8.4
0.6
4.4
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
2.6 1.3 5-0.15
All dimensions : mm
11
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Plugs ●Micro B - Assembly (insulator/contacts/lock) - Right angle SMT Part No.
HRS No.
Packaging
ZX64-B-5S-UNIT(31)
242-0009-3 31
1 piece
Contact HRS for Cable Termination Procedure Manual. 2.6 1.3
16.1
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
5-0.15
PCB mounting pattern
1.5
6
*PCB required (not supplied) Max. thickness: 1.0mm
7.9
1.3 No.5
2.6
No.1
No.1
3.7
0.35
1.1
0.5
No.5
6.8
All dimensions : mm
●Micro B - Component, Cover-top – Right angle SMT HRS No.
Packaging
ZX64-B-SLDA
242-0013-0
4,000 pcs/reel
24.7
Part No.
6.85
1.8
8
All dimensions : mm
12
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Plugs ●Micro B - Component, Cover-bottom - Right angle SMT HRS No.
Packaging
242-0049-8
4,000 pcs/reel
24.7
●Assembled
8
Assembly (insulator/contacts/lock)
Cover-top
1.8
4.1
6.85 8.4
Cover-bottom
All dimensions : mm
●Micro B - Component, Shell/cover – Right angle SMT Part No.
HRS No.
Packaging
ZX64-B-SLDC
242-0018-4
4,000 pcs/reel
6.85
Shell/cover, without cable clamp This shell/cover does not require ZX64-SLDB.
8
16.1
16.1
1.8
●Assembled
8.4
Assembly (insulator/contacts/lock)
Cover-top
1.8
6.85
4.1
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
18.25
Part No. ZX64-SLDB
Cover-bottom
All dimensions : mm
13
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Plugs ●Micro A - Assembly (insulator/contacts/lock) - Direct wire soldering Part No.
HRS No.
Packaging
ZX40-A-5S-UNIT(30)
242-0010-2 30
1 piece
12.4
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
Contact HRS for Cable Termination Procedure Manual.
Contacts
7.9
No.1
4.2
No.5
Insulator body (color grey)
All dimensions : mm
●Micro A - Component, Cover-top - Direct wire soldering HRS No.
Packaging
242-0011-5
4,000pcs/reel
22.6
Part No. ZX40-A-SLDA
6.85
1.8
8
All dimensions : mm
14
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Plugs
16.2
16.2
8
8
All dimensions : mm
ZX40-SLDB Part No.
ZX40-SLDB(3.3)
HRS No.
ZX40-SLDB
242-0004-0
ZX40-SLDB(3.3)
242-0023-4
Packaging 4,000pcs/reel
Cable dia. Ø3.8 Ø3.3
22.6
●Assembled
6.85 Assembly (insulator/contacts/lock)
Cover-top
1.8
8.6 4.75
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
●Micro A, Micro B - Component, Cover-bottom - Direct wire soldering
Cover-bottom
All dimensions : mm
15
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Plug-Vertical, cradle mount, Shell through hole ●Micro B, with lock 6.65
2-0.2
2.6 1.3 5-0.15 No.1
HRS No.
Packaging
ZX80-B-5S(30)
242-0017-1 30
100pcs/pks
6
Part No.
0.7
R1.
3.52 2.32 0.37
3.15
No.5
1 1.86
2.78 2.42 1.88
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
6.85 8.55
2.5 7.1
16.55 20.55
13
1.15
All dimensions : mm
●Micro B, without lock 6.65
2-0.2
2.6 1.3 5-0.15 No.1
HRS No.
Packaging
ZX80-B-5SA(30)
242-0019-7 30
100 pcs/pks
BPCB mounting pattern
13
0.5(Through hole) 1.1(Land) 2.6 6.65 16.55
Contact No.5
1.86
.55 0.4 1.3
2.2(Land)
R0
1.6(Through hole)
2.9 2.2
8-
Contact No.1
16
1.15
3.15
0.37
5
e) ol
.2
R0
H 2(
2.
8-
Ø 2-
1.1(Land) 0.5(Through hole)
0.7
2.5 7.1
16.55 20.55
1.3(Through hole) 1.9(Land)
Part No.
6 R1.
3.52 2.32 0.37
3.15
No.5
1 1.86
2.78 2.42 1.88
6.85 8.55
All dimensions : mm
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
BPackaging Specifications ●Embossed carrier tape dimensions Unreeling direction
C
D
0.5 Ø1 .5
E
2
3 Ø1
1.75
4
●Reel Dimensions
Unreeling direction
Ø3
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
A
B
80
Part No. Part No.
ZX62-B-5PA(33) ZX62-AB-5PA(31) ZX62M-B-5P(30) Other
A dimension 24 24 24 16
B dimension 11.5 11.5 11.5 7.5
ZX62-B-5PA(33) ZX62-AB-5PA(31) ZX62M-B-5P(30) Other
D dimension 30.4 30.4 30.4 22.4
E dimension 24.4 24.4 24.4 16.4
BRecommended Temperature Profile - Receptacles ●Using lead-free solder paste
The temperature profile is based on the left conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume/ thickness and board size/thickness. Contact your solder paste and equipment manufacturer for specific recommendations.
(ç) 240ç 230çmin
250 200
180ç
150
150ç
100 60S
50
30S
Note 1 : Up to 2 cycles of Reflow soldering are possible under the same conditions, provided that there is a return to normal temperature between the first and second cycle. Note 2 : The temperature profile indicates the board surface temperature at the point of contacts with the connector terminals.
BPrecautions 1. Exercise care when handling the connectors. Do not subject them to excessive external forces when mating/un-mating. 2. Mate and un-mate as intended, holding by the overmolded body, in the correct direction. Do not un-mate by pulling on the cable. 3. Some tooling marks may be visible on the surfaces of receptacle (shell/cover). No form/fit or function is affected. 4. Appearance of the surface finishes on the receptacles may vary between production runs. No affect on form, fit or function.
17
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
MEMO :
18
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
MEMO :
19
Sep.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
Powered by TCPDF (www.tcpdf.org)
USA: HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE 2300 Warrenville Road, Suite 150, Downers Grove, IL 60515 Phone : +1-630-282-6700 http://www.hirose.com/us/
USA: HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE 2841 Junction Ave, Suite 200 San Jose, CA. 95134 Phone : +1-408-253-9640 Fax : +1-408-253-9641 http://www.hirose.com/us/
USA: HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) 17197 N. Laurel Park Drive, Suite 253, Livonia, MI 48152 Phone : +1-734-542-9963 Fax : +1-734-542-9964 http://www.hirose.com/us/
THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg #8 1101 CC Amsterdam Z-O Phone : +31-20-6557460 Fax : +31-20-6557469 http://www.hirose.com/eu/
GERMANY: HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH Schoenbergstr. 20, 73760 ostfildern Phone : +49-711-456002-1 Fax : +49-711-456002-299 http://www.hirose.com/eu/
GERMANY: HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE Neumeyerstrasse 22-26, 90411 Nurnberg Phone : +49-911 32 68 89 63 Fax : +49-911 32 68 89 69 http://www.hirose.com/eu/
GERMANY: HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE Bayernstr. 3, Haus C 30855 Langenhagen, Germany Phone : +49-511 97 82 61 30 Fax : +49-511 97 82 61 35 http://www.hirose.com/eu/
FRANCE: HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE Regus La Garenne Colombes,Place de La Belgique, 71 Boulevard National La Garenne Colombes, 92250, France Phone : +33 (0) 1 7082 3170 Fax : +33 (1) 7082 3101 http://www.hirose.com/eu/
UNITED KINGDOM: HIROSE ELECTRIC EUROPE BV (UK BRANCH) 4 Newton Court, Kelvin Drive, Knowlhill, Milton Keynes, MK5 8NH Phone : +44-1908 202050 Fax : +44-1908 202058 http://www.hirose.com/eu/
CHINA: HIROSE ELECTRIC (SHANGHAI) CO., LTD. 1601, Henderson Metropolitan, NO.300, East Nanjing Road, Huangpu District, Shanghai, China 200001 Phone : +86-21-6391-3355 Fax : +86-21-6391-3335 http://www.hirose.com/cn/
CHINA: HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH A1001, Ocean International Center, Building 56# East 4th Ring Middle Road, ChaoYang District, Beijing, 100025 Phone : +86-10-5165-9332 Fax : +86-10-5908-1381 http://www.hirose.com/cn/
CHINA: HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, 5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008 Phone : +86-755-8207-0851 Fax : +86-755-8207-0873 http://www.hirose.com/cn/
HONG KONG: HIROSE ELECTRIC HONGKONG TRADING CO., LTD. Room 1001, West Wing, Tsim Sha Tsui Centre, 66 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +852-2803-5338 Fax : +852-2591-6560 http://www.hirose.com/hk/
TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. 103 8F, No.87, Zhengzhou Rd., Taipei Phone : +886-2-2555-7377 Fax : +886-2-2555-7350 http://www.hirose.com/tw/
KOREA: HIROSE KOREA CO.,LTD. 250, Huimanggongwon-ro, Siheung-si, Gyeonggi-do, Korea, 15083 Phone : +82-31-496-7000 or 7124 Fax : +82-31-496-7100 http://www.hirose.co.kr/
SINGAPORE: INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE HIROSE ELECTRIC SINGAPORE PTE. LTD. 10 Anson Road #26-16, International Plaza Office NO.552, Regus-Green Boulevard, Level5, Tower C, Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India 079903, Singapore Phone : +91-12-660-8018 Phone : +65-6324-6113 Fax : +91-120-4804949 Fax : +65-6324-6123 http://www.hirose.com/sg/ http://www.hirose.com/sg/ MALAYSIA: PENANG REPRESENTATIVE OFFICE 1-21-01, Suntech @ Penang Cybercity (1164), Lintang Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia. Phone : +604-619-2564 Fax : +604-619-2574 http://www.hirose.com/sg/
®
20
INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma Gandhi (MG) Road, Bangalore 560 001, Karnataka, India Phone : +91-80-4120 1907 Fax : +91-80-4120 9908 http://www.hirose.com/sg/
THAILAND: BANGKOK OFFICE (REPRESENTATIVE OFFICE) Unit 4703, 47th FL., 1 Empire Tower, South Sathorn Road, Yannawa, Sathorn, Bangkok 10120 Thailand Phone : +66-2-686-1255 Fax : +66-2-686-3433 http://www.hirose.com/sg/
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 09/2016. Contents are subject to change without notice for the purpose of improvements.
