Microsoft Band Wrist Clasp Replacement

Microsoft Band Wrist Clasp Replacement

Microsoft Band Wrist Clasp Replacement This guide will safely replace the spring clasp system.

Written By: Chad Steese

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Microsoft Band Wrist Clasp Replacement

INTRODUCTION You might try keeping track of the screws with the use of a magnetic mat.

TOOLS: T3 Torx Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Microsoft Band Wrist Clasp Replacement

Step 1 — Wrist Clasp 

Using the T3 Torx Screwdriver, remove the two 2.00mm long screws from the inside of the clasp.



Remove the metal plate with the serial and model number on it by pulling it straight up around the two hooks.

Step 2

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Microsoft Band Wrist Clasp Replacement

Step 3 

Pull the two securing pins out of the rubberized part of the band.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-23 03:48:03 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4