Microsoft Surface Pro Camera Replacement

Microsoft Surface Pro Camera Replacement

Microsoft Surface Pro Camera Replacement This guide shows how to install both the front and rear cameras on the Surface Pro.

Written By: Jonathan Choi

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 5

Microsoft Surface Pro Camera Replacement

INTRODUCTION *In order to access the camera, refer to steps 1 - 5 in the Microsoft Surface Pro Teardown Guide to remove the screen. Teardown Guide

TOOLS:

PARTS:

T5 Torx Screwdriver (1)

Surface Pro Front Facing Camera (1)

iFixit Opening Tools (1) Spudger (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 5

Microsoft Surface Pro Camera Replacement

Step 1 — Camera



Using a T5 Torx screwdriver, unscrew a total number of 23 screws located on the outside panel of the Surface Pro.

Step 2 

© iFixit — CC BY-NC-SA

www.iFixit.com

Use the plastic opening tool or fingers to pry out the front camera.

Page 3 of 5

Microsoft Surface Pro Camera Replacement

Step 3 

Lift the outside panel from the Surface Pro.

Step 4



Use the plastic opening tool to pry out the back camera.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-17 02:08:57 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 5

Microsoft Surface Pro Camera Replacement

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 5