Microswitches MK series AWS
5
Microswitches MK series Description Microswitches of MK series have been developed in order to add new features to traditional and tested microswitches of Pizzato Elettrica. These products have been designed with shapes and fixing perfectly interchangeable with the previous ones and with various additional functions useful to extend the application field. The main innovation of this series is the tripping device modern and evolved, with qualitative features higher than solutions present on the market. The electrical contact on new microswitch has been realized with higher reliability technology, thanks to the double and redundant shape, and has the possibility to carry out operations with positive opening. The housing of the new microswitch provides the possibility to seat gaskets in order to seal the device against fine dusts or liquids up to IP65 degree. Fastening terminals of conductors are more practical and allow the fixing of different diameter cables or the possibility to choose different bends of faston contacts. For high quantity it’s possible to supply the microswitch only with the contact NO or NC, in order to minimize purchase costs.
Contact block reliability In the following table we refer to the typical microswitch contact structure (type A) normally used in the industry, compared with the innovative solution that Pizzato Elettrica uses in new MK series microswitches: movable contact with single interruption and double contacts (type B). As you can see from the table below, this last structure (type B) offers half of the contact resistance (R) than the simple mobile contact (type A) and a lower probability of failure (fe). In fact, defined x the probability of a commutation failure of a single interruption, it results that in the type A the failure probability fe=x, in the type B the probability fe x2. This means that if in a certain situation the probability of a single interruption failure x is equal, for instance, to 1x10-4 (1 failed interruption every 10,000) we will have: - for type A one failed commutation every 10,000. - for type B one failed commutation every 100,000,000 Type
Diagram
A
NO COMMON
Customar y microswitch B Pizzato MK series microswitch
Description
NC
NO
COMMON
NC
Contact Failure resistance R probability fe
mobile contact, single interruption
R=Rc
contacts with single interruption and double contacts
R=Rc/2
fe=x
fe
x2
Extended temperature range For the new MK series versions with extended temperature range are available on request. Differently from standard MK microswitches with temperature range from +85 C° to -25 C°, these special versions can be used in places where the ambient temperature changes from +85 C° to -40 °C. They can be installed inside cold stores, sterilizers or other equipment with very low ambient temperature. Special materials that have been used to realize these versions, maintain unchanged their features also in these conditions, widening the installation possibilities.
Microswitches for safety applications
safety lever
143
All microswitches that have the symbol beside the code are with positive opening, therefore suitable for safety applications. These microswitches are provided with a rigid connection between button and NC contacts, which are opened by force through a strong/sturdy internal safety lever. The positive opening has been realised in conformity with the standard EN 60947 5 1, enclosure K, therefore these microswitches are suitable for the installation for people’s protection.
General Catalogue 2015-2016
5 Protection degree IP65 By installing microswitches MK ••2••• with terminal covers VF MKC•22 or terminal covers VF MKC•23, it’s possible to obtain a microswitch fully dust proof and waterproof. Thanks to special rubber gaskets anti-oil, we achieve the protection degree IP65. For application with high presence of dirtiness, are available also versions with double gasket in the button (internal + external). ex. MK ••2•12 or MK ••2•13.
Gaskets Microswitch: MKV12D12 Terminal cover: VF MKCV22
Clamping screw plates for different diameter cables (MK V•) These clamping screw plates have a particular “roofing tile” structure and are connected loosely to the clamping screw. In this way, during the wires fixing, the clamping screw plate is able to suit to cables of different diameter (see picture) and tends to tighten the wires toward the screw instead of permitting them to escape towards the outside.
Stackable terminal covers with wiretrap cable gland New terminal covers supplied with wiretrap cable gland are provided for the protection degree up to IP65. These terminal covers are snap-in assembled and they have small dimensions in the microswitch profile, it’s possible to install them also on microswitches fixed side by side. See page 154.
Orientable actuators Thanks to the new patented lateral fixing system, it’s possible to rotate the roller of microswitches MK •••15 and MK •••17 in 90° steps. The lateral fixing allows to disconnect the actuator from the body also when the actuator is already fixed to the racket. The flexibility of the product allows also to unify items on stock for applications that require roller both longitudinal or transversal.
General Catalogue 2015-2016
144
5
Microswitches MK series
BUTTON DIRECT ACTION D01
D02
D03
D04
D05
D06
D08
LEVER DIRECT ACTION D30
D31
D32
D35
R30
R31
R32
R35
D37
D40
D42
R40
R42
LEVER INVERTED ACTION
LEVER BACK DIRECT ACTION
F30
F31
F32
F35
F40
F42
ACTUATORS product options accessory sold separately
1 1NO+1NC, snap action
2
3
1NO, snap action (on request)
1NC, snap action (on request)
V
H
F
faston 6.3 mm vertical
faston 6.3 mm 45° bend to right
TERMINALS
screws with self-lifting plate
145
G
faston 6,3 mm 45° bend to left (on request)
General Catalogue 2015-2016
5
D09
D10
D12
D13
external rubber gasket
external rubber gasket
D15
D17
D45
D46
D47
D53
D59
R45
R46
R47
R53
R59
F45
F46
F47
F53
F59
Code structure
D18
D19
D49
R60
F49
Attention! The feasibility of a code number does not mean the effective availability of a product. Please contact our sales office. article
options
MK V12D40-GR16T6 Terminal type
Ambient temperature
V
screws with self-lifting plate
H
vertical faston
F
faston, bent 45° to right
G
faston, bent 45° to left (on request)
-25°C … +85°C (standard) T6 Rollers standard roller
Contact blocks 1
1NO+1NC, snap action in deviation
2
1NO, snap action (on request)
3
1NC, snap action (on request)
IP40 (with terminal cover)
2
IP65 (with terminal cover)
R16
metal roller Ø 9.5x4 mm (only for actuators 40, 42,45, 47, 53, 59)
R10
large plastic roller Ø 9.8x8.4 mm (only for actuators 40, 42, 45, 53)
Contact type silver contacts (standard)
Maximum protection degree 1
G
silver contacts with 1 µm gold coating
Actuator
Actuation type
01
pin
D
direct action
02
pin
R
inverted action
03
narrow button
back direct action
..
................
F
General Catalogue 2015-2016
-40°C … +85°C
146
5
Microswitches MK series Technical data Housing Housing made of glass fiber reinforced technopolymer, self-extinguishing and shockproof. Protection degree acc. to EN 60529: IP00 without terminal cover IP20 (with terminal cover VF C01, VF C03) IP40 (with terminal cover VF MKC•1•, VF C02) IP65 (with terminal cover VF MKC•22 +
General data Ambient temperature: Max. actuation frequency: Mechanical endurance: Safety parameters: B10d: Tightening torques for installation:
MK V•2••• or VF MKC•23 + MK H•2•••)
-25°C … +85°C 3600 operating cycles1/hour 10 million operating cycles1 20,000,000 for NC contacts see pages 235-246
(1) One operation cycle means two movements, one to close and one to open contacts, as defined in EN 60947‑5‑1.
Main features Technopolymer housing High reliability contacts
Cable cross section (flexible copper strands) min. MK series: max.
1 x 0.34 mm2 2 x 1.5 mm2
(1 x AWG 22) (2 x AWG 16)
Protection degree up to IP65 4 terminal types available 47 actuators available Versions with positive opening Versions with gold-plated silver contacts Terminal covers with wiretrap cable gland
Markings and quality marks:
IMQ approval: UL approval: CCC approval: EAC approval:
CA02.05772 E131787 2013010305604291 RU C-IT ДМ94.В.01024
In conformity with standards: IEC 60947‑5‑1, EN 60947‑5‑1, IEC 60529, EN 60529, EN 60947‑1, IEC 60947‑1. Approvals: UL 508, CSA 22.2 No.14, EN 60947-1, EN 60947-5-1.
In conformity with the requirements of: Low Voltage Directive 2006/95/EC, Machinery Directive 2006/42/EC and EMC Directive 2004/108/EC. Positive contact opening in conformity with standards: IEC 60947‑5‑1, EN 60947‑5‑1.
Installation for safety applications: aside the product code. Always connect the safety circuit to the NC contacts (normally Use only microswitches marked with the symbol closed contacts) as stated in standard EN 60947‑5‑1, encl. K, par. 2. Actuate the switch at least up to the positive opening travel (CAP) stated aside the article code. Actuate the switch at least with the positive opening force (FAP) stated aside the article code. If not expressly indicated in this chapter, for correct installation and utilization of all articles see chapter utilization requirements from page 235 to page 246. Electrical data Thermal current (Ith): Rated insulation voltage (Ui): Rated impulse withstand voltage (Uimp): Conditional short circuit current: Protection against short circuits: Pollution degree: Dielectric strength
147
Utilization category 16 A 250 Vac 300 Vdc 4 kV 1000 A acc. to EN 60947‑5‑1 type gG fuse 16 A 250 V 3 2000 Vac/min.
Alternating current: AC15 (50 … 60 Hz) Ue (V) 250 120 Ie (A) 6 6 Direct current: DC13 Ue (V) 24 125 250 Ie (A) 5 0.6 0.3
General Catalogue 2015-2016
5 Characteristics approved by IMQ and CCC
Characteristics approved by UL
Rated insulation voltage (Ui): 250 Vac Conventional free air thermal current (Ith): 16 A Protection against short circuits: type gG fuse 16 A 250 V Rated impulse withstand voltage (Uimp): 4 kV Conditional short circuit current: 1000 A Protection degree of the housing: IP00 Terminals: screw terminals/faston Pollution degree: 3 Utilization category: AC15 Operating voltage (Ue): 250 Vac (50 Hz) Operating current (Ie): 5 A Forms of the contact element: X; Y; C Positive opening of contacts on contact blocks: 1, 3
Utilization categories
Q300 (69 VA, 125-250 Vdc) A300 (720 VA, 120 … 300 Vac)
In conformity with standard: UL 508, CSA 22.2 No.14
Please contact our technical service for the list of approved products.
In conformity with standards: EN 60947‑1, EN 60947‑5‑1+ A1:2009, fundamental requirements of the Low Voltage Directive 2006/95/EC. Please contact our technical service for the list of approved products.
Circuit diagram With direct and back direct action (F, D) NO
With inverted action (R)
COMMON
NC
Contacts with single interruption and double contacts
COMMON
NC
NO
COMMON
NC
NO
COMMON
NO
NC
FS operating force FR releasing force
OC over-travel CD differential travel
Maximumwith and Minimum page 245 - type 1 Microswitches directspeed action
All measures in the drawings are in mm
23.3
9.7
24.3 11.9
17.4
49.2
PC OC CD
4.2x5
12.2
11.9
4.2
25.4
18.4
26.3
24.3
4.2
4.2x5
Ø 2.5
14.6
9.7
Ø 2.5
14.6
16.6
23.3
1NO+1NC
OC
FAP positive opening force
25.4
12.2
11.9
17.4
49.2
0,5 mm 1,5 mm 0,05 mm
FS FR
MK V11D02
4N 3N
Maximum and Minimum speed page 245 - type 1
1NO+1NC
PC OC CD
FS FR
0,5 mm 2 mm 0,05 mm
4N 3N
Maximum and Minimum speed page 245 - type 1
23.3
Ø 3.8
23.3
28.1
PC pre-travel CAP positive opening travel
MK V11D01
Ø 3.8 Ø 7
25.4 49.2
11.9
PC OC CD
0,5 mm 2 mm 0,05 mm
FS FR
38.2
9.7
28.5
24.3
4.2 11.9
17.4
25.4
12.2
11.9
17.4
49.2
4N 3N
Maximum and Minimum speed page 245 - type 1
General Catalogue 2015-2016
14.6
24.3
1NO+1NC
4.2x5
12.2
4.2
4.2x5
MK V11D03
34.2
9.7
14.6
24.5
Ø 7
11.9
FR
FAP
OC
FAP
11.9
CD
FS
FR
CAP
CD
FS CAP
PC
PC
Actuation forces and travels
MK V11D04
1NO+1NC
PC OC CD
0,5 mm 2 mm 0,05 mm
FS FR
4N 3N
Maximum and Minimum speed page 245 - type 1
148
5
Microswitches MK series
23.3
Ø 6.8
Ø 6.8
MK V11D06
1NO+1NC
37.7
23.3
2.5
26.1
11.9
12.2
4N 3N 20 N
4N FS 0,5 mm PC 3N FR OC 5,5 mm 20 N FAP CD 0,05 mm CAP 2,2 mm Maximum and Minimum speed page 245 - type 1
MK V11D09
1NO+1NC
9.7
26.1
4.2x5
12.2
11.9
11.9
17.4
49.2
14 M12 x1
4.2
4.2 25.4
Ø 10.6
9.3
26.1
16.4
47.7
9.7
16.4
41.5
14
11.9
Ø 6.8
2.5
M12 x1
15.6
2.5
23.3
Ø 6.8
8.6 max.
23.3
17.4
4.8 max.
FS FR FAP
0,5 mm 5,5 mm 0,05 mm 2,2 mm
12.2
11.9
49.2
Maximum and Minimum speed page 245 - type 1
4.2x5
25.4
17.4
PC OC CD CAP
M10x0.75
4.2
4.2x5
11.9
Ø6.8
47.7
38
9.7 4.2
25.4
4N 3N 20 N
14
16.4
60.2
14
9.7
21.1 max.
2.5 50.5
28.1 11.9
1NO+1NC
38
FS FR FAP
Maximum and Minimum speed page 245 - type 1
M 10 x0.75
49.2
25.4
12.2 11.9
17.4
49.2
4N FS 0,5 mm PC 3N FR OC 5,5 mm 20 N FAP CD 0,05 mm CAP 2,2 mm Maximum and Minimum speed page 245 - type 1
MK V11D10
17.4
0,5 mm 3 mm 0,05 mm 2,2 mm
PC OC CD CAP
1NO+1NC
Ø 6.8
16.4 4.2x5
MK V11D08
12.2
11.9
8.6 max.
23.3
25.4 49.2
4N FS 0,5 mm PC 3N FR OC 2 mm 20 N FAP CD 0,05 mm CAP 2,2 mm Maximum and Minimum speed page 245 - type 1
MK V11D05
26.1 11.9
17.4
49.2
4.2
12.2
11.9
26.1
25.4
15.6
11.9
9.7
16.4 24.3
4.2x5
4.2
4.2x5
31.2
9.7
14.6
21.5
28
8
M 10 x0.75
51.2
23.3
4,5 N FS 0,5 mm PC 3N. FR OC 5,5 mm 20 N FAP CD 0,05 mm CAP 2,2 mm Maximum and Minimum speed page 245 - type 1
MK V11D12
1NO+1NC
1NO+1NC
Fixed only by threaded head
7 max.
3 33.6
M12x1
59.7
15
17
9.7
26.1
26.1 4.2
4.2x5 11.9
MK V11D13
Ø 17.2 17 M 12 x1
14
3.8
12
51.2
0.85 max.
2.5
2.5
Ø 6.8
16.4
41.5
25.1
23.3
1NO+1NC
25.4 49.2
PC OC CD CAP
14
12.2
11.9
FS FR FAP
0,6 mm 5,4 mm 0,05 mm 2,2 mm
12.2
49.2
17.4
6N. 4N 20 N
Maximum and Minimum speed page 245 - type 1
17.4
4N FS 0,5 mm MK V11D15 1NO+1NC PC 3N. FR OC 5,5 mm 20 N FAP CD 0,05 mm CAP 2,2 mm Maximum and Minimum speed page 245 - type 2
Fixed only by threaded head
MK V11D17
1NO+1NC
23.6
9.7 11.9
FS FR FAP
Items with withcode code on green on green background background are stock areitems stock items
4.2 25.4 49.2
17.4
0,5 mm 5,5 mm 0,05 mm 2,2 mm
26.1
49.6
40 4.2x5
4N 3N 20 N
Maximum and Minimum speed page 245 - type 2
149
Ø 10.5
12.2
49.2
PC OC CD CAP
23.3
16.4
59.7
8 max.
M12x1 17
26.1 14
3.6
12
12
15
3
33.6
3.8
MK V11D18
11.9
12.2 17.4
4N FS 0,5 mm PC 3N. FR OC 5,5 mm 20 N FAP CD 0,05 mm CAP 2,2 mm Maximum and Minimum speed page 245 - type 2
Accessories See page 225
1NO+1NC
The 2D/3D files are available at www.pizzato.com
General Catalogue 2015-2016
5 3.6
12
25.4
17.4
4N FS 0,5 mm PC 3N. FR OC 5,5 mm 20 N FAP CD 0,05 mm CAP 2,2 mm Maximum and Minimum speed page 245 - type 2
MK V11D30
1NO+1NC
R=26.2
FS FR
9 mm 10 mm 1,1 mm
PC OC CD
1NO+1NC
0,65 N 0,5 N
Maximum and Minimum speed page 245 - type 3
5
27.4
R= 54
13.7 9.7
29.5
32.9
17
0.9
23.3
17
29.7 17.4
5
0.9
12.2
11.9
49.2
37.1
49.2
9.7
4.2 11.9
12.2
29.7
11.9
38.4
28.7 13.7
17
26.1
9.7
16.4
4.2x5
4.2 25.4
11.9
MK V11D19
0.9
49.7
40
Ø 10.5
4.2x5
5
R= 63
23.6
23.6
23.3
25.4
1,66 N 1,32 N
MK V11D32
Maximum and Minimum speed page 245 - type 3
49.4
Ø 1
29.7
17
0.9
9.7
FS FR
0,28 N 0,22 N
MK V11D37
R= 37.5
0.9
PC OC CD
1NO+1NC
6,7 mm 7,8 mm 0,8 mm
FS FR
0,86 N 0,66 N
9.5
MK V11D42
1NO+1NC
11.9
MK V11D45
1NO+1NC
PC OC CD
3,5 mm 4,5 mm 0,4 mm
FS FR
1,66 N 1,28 N
Maximum and Minimum speed page 245 - type 6 Items with withcode code on green on green background background are stock areitems stock items
General Catalogue 2015-2016
1,09 N 0,84 N
Ø 9.5
35.9 11.9
17.4
49.2
FS FR
4.2
17
29.7
4.2x5
12.2
11.9
17.4
5,3 mm 5,7 mm 0,6 mm
43.9
34.2 13.7
25.4
PC OC CD
R=23.5
4.2
4.2
4.2x5
12.2
11.9
Maximum and Minimum speed page 245 - type 6
9.7
17
0.9
25.4 49.2
Maximum and Minimum speed page 245 - type 6
R= 24.6
4.2 11.9
17.4
49.2
MK V11D40
4.2x5
12.2
11.9
23.7
25.4
4.2
9.7
11.9
0,08 N 0,04 N
9.7
29.7
17
47.1
37.4 4.2
4.2x5
FS FR
19 mm 9,5 mm 2,3 mm
36
9.5
4.2
13.7
PC OC CD
1NO+1NC
9.7
17
0.9
17.4
Maximum and Minimum speed page 245 - type 3
Maximum and Minimum speed page 245 - type 3
R= 47.5
12.2
11.9
49.2
45.7
19 mm 16,7 mm 2,5 mm
25.4
4.2 25.4
11.9
1NO+1NC
PC OC CD
12.2 17.4
49.2
MK V11D46
45.6
PC OC CD
1NO+1NC
11.9
17.4
9.5
MK V11D35
4.2x5
12.2
11.9
49.2
13.7
25.4
4.2
11.9
0,76 N 0,58 N
Maximum and Minimum speed page 245 - type 3
9.7
4.2
4.2x5
FS FR
7,7 mm 8,3 mm 0,9 mm
R= 139
39.7 13.7
17
PC OC CD
1NO+1NC
5
R= 146.5
0.9
17.4
48.4
FS FR
4,54 mm 3,86 mm 0,42 mm
12.2
11.9
49.2
38.7
PC OC CD
1NO+1NC
11.9
17.4
29.7
MK V11D31
4.2x5
12.2
29.7
11.9
49.2
13.7
25.4
4.2
11.9
3,5 mm 4,5 mm 0,4 mm
FS FR
1,66 N 1,28 N
Maximum and Minimum speed page 245 - type 6 Accessories See page 225
The 2D/3D files are available at www.pizzato.com
150
5
Microswitches MK series It switches
It does not switch
4.2
R= 38.2
MK V11D49
35.8
9.7
29.7
17
48.1
0.9
4.2x5 11.9
25.4
12.2
11.9
17.4
49.2
7,7 mm 8,9 mm 0,9 mm
PC OC CD
1NO+1NC
4.2
42.9
9.5
38.4
R= 17.8
12.2
11.9
29.7
Maximum and Minimum speed page 245 - type 3
49.2
MK V11D53
17.4
Hand operated
1NO+1NC
4.2
13.7 4.2
25.4
26.1 9.7
1,66 N 1,28 N
9.7
17
0.9
12.2
11.9
49.2
29.7
FS FR
25.4
33.2
3,5 mm 4 mm 0,4 mm
R= 54
11.9
11.9
12.2 17.4
Maximum and Minimum speed page 245 - type 6
4.2x5
4.2
4.2x5
11.9
PC OC CD
1NO+1NC
13.7
17
29.7
13.7
25.4 49.2
0.9
13.7
MK V11D47
11.9
16.6
4.2
4.2x5
4.2
9.7
17
0.9
55.1
45.4
9.5
9.5
R= 24.6
FS FR
0,76 N 0,58 N
MK V11D59
Maximum and Minimum speed page 245 - type 6
2,5 mm 4,5 mm 0,2 mm
PC OC CD
1NO+1NC
2,3 N 1,77 N
FS FR
Maximum and Minimum speed page 245 - type 6
Microswitches with inverted action 5
11.9
25.4
11.9
25.4
17.4
49.2
MK V11R30
FS FR
4,4 mm 14 mm 1 mm
PC OC CD
1NO+1NC
31
23.8
21.3
9.7
4.2x5 12.2
11.9
4.2
4.2
4.2x5
13.7
17
33.2
29.7
23.5
13.7
8.1
9.7
17
8.1
5
R= 26.2
R= 63
12.2 17.4
11.9
49.2
0,6 N 0,4 N
MK V11R31
Maximum and Minimum speed page 245 - type 4
FS FR
0,7 mm 6,01 mm 0,23 mm
PC OC CD
1NO+1NC
1,47 N 0,72 N
Maximum and Minimum speed page 245 - type 4
5
R= 146.5
5
12.2
FS FR
3,7 mm 11,8 mm 0,8 mm
0,7 N 0,5 N
MK V11R35
Maximum and Minimum speed page 245 - type 4
11.9
25.4
1NO+1NC
PC OC CD
3,4 mm 10,3 mm 0,7 mm
9.7 11.9
17.4
FS FR
0,8 N 0,5 N
Maximum and Minimum speed page 245 - type 7 Items with withcode code on green on green background background are stock areitems stock items
151
4.2x5
12.2
11.9
49.2
MK V11R40
0,3 N 0,2 N
4.2
4.2
4.2
4.2x5
29.7
13.7
8.1
17
29.7
43.3
33.6
R= 37.5
9.7
13.7
8.1
FS FR
14,3 mm 25,7 mm 3,2 mm
Maximum and Minimum speed page 245 - type 7
4.2
9.5
R= 47.5
17.4
PC OC CD
1NO+1NC
12.2
11.9
42.7
PC OC CD
1NO+1NC
17
25.4 49.2
33
MK V11R32
11.9
17.4
49.2
29.7
11.9
9.5
25.4
13.7
11.9
4.2
4.2x5
4.2
4.2x5
9.7
17
29.7
32.7
23
13.7
8.1
9.7
17
8.1
37.3
R= 54
25.4
12.2
11.9
17.4
49.2
MK V11R42
1NO+1NC
PC OC CD
2,7 mm 7,9 mm 0,5 mm
FS FR
1,2 N 1,7 N
Maximum and Minimum speed page 245 - type 7 Accessories See page 225
The 2D/3D files are available at www.pizzato.com
General Catalogue 2015-2016
5 4.2
11.9
43.6
23.8
13.7
17
9.7 25.4
FS FR
1,5 mm 5,5 mm 0,3 mm
17.4
1,7 N 1N
MK V11R46
FS FR
3,5 mm 5,4 mm 0,2 mm
PC OC CD
1NO+1NC
1,5 N 1,45 N
Maximum and Minimum speed page 245 - type 7
It does not switch
4.2
R= 54
11.9
25.4 49.2
1NO+1NC
11.9
12.2
11.9
FS FR
1,7 mm 5,3 mm 0,3 mm
PC OC CD
25.4
1,7 N 1N
MK V11R53
43.7 29.7 17.4
FS FR
4,3 mm 11,6 mm 0,8 mm
PC OC CD
1NO+1NC
0,8 N 0,4 N
Maximum and Minimum speed page 245 - type 7 R= 39
4.2
9.5
12.2
11.9
49.2
17.4
Maximum and Minimum speed page 245 - type 7 R= 17.8
13.7 9.7
29.7
17
53.3
43.6 13.7 4.2
4.2x5
8.1
4.2x5
9.7
17
8.1
4.2
34
9.5
R= 24.6
9.5
It switches
12.2
11.9
49.2
Maximum and Minimum speed page 245 - type 7
MK V11R47
11.9
17.4
PC OC CD
1NO+1NC
4.2x5
12.2
11.9
4.2
MK V11R45
25.4 49.2
4.2
4.2
4.2x5
9.5
8.1
9.7
29.7
41.9
32.2 13.7
8.1
17
R= 23.5
4.2
R= 24.6
11.9
25.4
29.7
9.7
FS FR
1,5 mm 3,9 mm 0,3 mm
PC OC CD
1NO+1NC
11.9
17.4
49.2
MK V11R59
4.2x5
12.2
11.9
4.2
4.2
4.2x5
37.7 - 57.7
28 - 48 13.7
17
29.7
13.7
8.1
9.7
17
8.1
41.5
31.8
M 2.6
25.4
12.2
11.9
17.4
49.2
2,4 N 1,3 N
MK V11R60
Maximum and Minimum speed page 245 - type 7
FS FR
2,7 mm 9,2 mm 0,5 mm
PC OC CD
1NO+1NC
1,2 N 0,6 N
Maximum and Minimum speed page 245 - type 4
Microswitches with back direct action 5
11.9
25.4
0,6 N 0,5 N
Maximum and Minimum speed page 245 - type 5
35.8
11.9
25.4
1NO+1NC
PC OC CD
9.7 4.2x5
12.2
11.9
11.9
17.4
49.2
MK V11F32
2,5 mm 11,5 mm 0,3 mm
FS FR
General Catalogue 2015-2016
25.4
12.2
11.9
17.4
49.2
0,7 N 0,6 N
MK V11F35
Maximum and Minimum speed page 245 - type 5 Accessories See page 225
33.6
35
8.4
4.2
4.2
4.2x5
5
152.5
9.7
29.7
13.7
17
26.1
8.4
17.4
1,76 N FS 1,63 mm MK V11F31 1NO+1NC PC 1,08 N FR OC 4,64 mm 5,78 N FAP CD 0,17 mm CAP 5,72 mm Maximum and Minimum speed page 245 - type 5
5
R= 60
12.2
13.7
1NO+1NC
FS FR
17
MK V11F30
2,7 mm 12,9 mm 0,35 mm
11.9
49.2
49.2
PC OC CD
29.7
13.7 23.9 4.2
11.9
17.4
44.7
25.4
29.7
11.9
4.2x5
12.2
4.2
4.2x5
9.7
17
36.8
8.4
9.7
29.7
13.7
17
8.4
5
R= 32.2
27.1
R= 69
1NO+1NC
PC OC CD
7,5 mm 25,9 mm 1,3 mm
FS FR
0,25 N 0,2 N
Maximum and Minimum speed page 245 - type 5
The 2D/3D files are available at www.pizzato.com
152
5
Microswitches MK series
MK V11F42
8.4
9.7 4.2x5
12.2
11.9
17.4
25.4
49.2
1,3 N FS 1,1 mm PC 0,9 N FR OC 6,6 mm 6,9 N FAP CD 0,1 mm CAP 6,3 mm Maximum and Minimum speed page 245 - type 8
MK V11F46
1NO+1NC
R= 44.1
It does not switch
26 13.7 33.2 13.7
17
46.8
8.4
9.7
29.7
13.7
4.2
4.2
9.5
R= 23.8
9.7
17
1N FS 1,5 mm PC 0,7 N FR OC 7,5 mm 4,8 N FAP CD 0,2 mm CAP 9 mm Maximum and Minimum speed page 245 - type 5
4.2x5
11.9
12.2
11.9
25.4
12.2
11.9
49.2
PC OC CD
1NO+1NC
17.4
1NO+1NC
49.2
MK V11F53
12.2
11.9
FS FR
2,5 mm 11,5 mm 0,3 mm
0,7 N 0,6 N
MK V11F59
Maximum and Minimum speed page 245 - type 8
1NO+1NC
PC OC CD CAP
Maximum and Minimum speed page 245 - type 8 All measures in the drawings are in mm
19
6.3
6.3
19
19
19
19
6.4
6.4
19
19
12.7
12.7
6.3
6.3
12.7
12.7
6.3
6.3
Screw terminals V with plate
Vertical faston H terminals
12.7
12.7
6.3
Faston terminals F, right bending
12
12
45° 6.3
45°
14.3
8.5
9.7
19
6.3
7
12.2
10.8
1,7 N 1,3 N 8,9 N
FS FR FAP
0,8 mm 5,2 mm 0,08 mm 4,9 mm
Terminals outline dimensions 7
42.9
MK V11F49
4.2
37.1
R= 60
25.4
4.2
9.7
1,3 N FS 1,1 mm PC 0,9 N FR OC 5,6 mm 6,9 N FAP CD 0,1 mm CAP 6,3 mm Maximum and Minimum speed page 245 - type 8
11.9
25.4 49.2
1NO+1NC
4.2x5
11.9
12.2 17.4
11.9
8.4
8.4
4.2
4.2
25.4 49.2
9.5
MK V11F47
11.9
16.6
29.7
13.7
4.2x5
9.7
17
55
45.3
9.5
8.4
4.2x5
1,3 N FS 1,1 mm PC 0,9 N FR OC 6,6 mm 6,9 N FAP CD 0,1 mm CAP 6,3 mm Maximum and Minimum speed page 245 - type 8
4.2
R= 30.6
It switches
17.4
1NO+1NC
17
MK V11F45
12.2
11.9
49.2
35.7
11.9
29.7
25.4
29.7
11.9
4.2
4.2
4.2x5
29.7
4.2
9.5
4.2
17
13.7
43.6
33.9
R= 29.5
9.7
17
1N FS 1,6 mm PC 0,7 N FR OC 8,4 mm 4,9 N FAP CD 0,2 mm CAP 9 mm Maximum and Minimum speed page 245 - type 8 1NO+1NC
4.2
8.4
17.4
46.2
0,85 N 0,65 N
9.5
12.2
11.9
49.2
Maximum and Minimum speed page 245 - type 8 R= 30.6
25.4
29.7
FS FR
2,4 mm 10,4 mm 0,25 mm
PC OC CD
1NO+1NC
11.9
17.4
49.2
MK V11F40
4.2x5
12.2
11.9
36.5
25.4
13.7
11.9
45
35.3 13.7 9.7
29.7
17
46.1
8.4
9.7 4.2
4.2x5
4.2
9.5
R= 43.5
36.4 13.7
8.4
17
4.2
9.5
R= 53.5
6.3
12.7
12.7
6.3
Faston terminals G, left bending (on request)
Note: H vertical faston terminals can be bent according to one’s installation requirements. We recommend to bend the faston with an angle not higher than 45° and to carry out this operation no more than 5 times.
153
General Catalogue 2015-2016
5 Protections (terminal covers)
10 pcs. packs 17.4
17.4 52.4
8.2
52.4
16
9
38.6
32
25.1
16
18.5
9
13
13
8.2
65.4 65.4
Protective terminal cover for screw terminals snap-in assembled and with wiretrap cable gland. Allows the stacked installation of switches.
Protective terminal cover for vertical faston terminals with wiretrap cable gland, snap-in attachment. Allows the stacked installation of switches.
Article
Description
Protection degree
Article
Description
Protection degree
VF MKCV11
Protective terminal cover without gasket for multipolar cables from Ø 5 to Ø 7.5 mm
IP40
VF MKCH11
Protective terminal cover without gasket for multipolar cables from Ø 5 to Ø 7.5 mm
IP40
VF MKCV12
Protective terminal cover without gasket for multipolar cables from Ø 4 to Ø 7.5 mm
IP40
VF MKCH12
Protective terminal cover without gasket for multipolar cables from Ø 4 to Ø 7.5 mm
IP40
VF MKCV13
Protective terminal cover without gasket for multipolar cables from Ø 2 to Ø 5.5 mm
IP40
VF MKCH13
Protective terminal cover without gasket for multipolar cables from Ø 2 to Ø 5.5 mm
IP40
VF MKCV22
Protective terminal cover with gasket for multipolar cables from Ø 4 to Ø 7.5 mm
IP65
VF MKCH22
Protective terminal cover with gasket for multipolar cables from Ø 4 to Ø 7.5 mm
IP65
VF MKCV23
Protective terminal cover with gasket for multipolar cables from Ø 2 to Ø 5.5 mm
IP65
VF MKCH23
Protective terminal cover with gasket for multipolar cables from Ø 2 to Ø 5.5 mm
IP65
52.8
54
21.1
4.5
4.3
4.3
4.3
4.3
16.6
25
10
4.9
20.8
22.7
7.5 22.7
68.3
21
25.4 22
Ø 20
8.5
7.5
25.4
Article
54
Description
Protection degree
Article
IP20
VF C02
Protective terminal cover for screw terminals
Protection degree
Description
Protective terminal cover for screw terminals with cable gland PG9 for multipolar cables from Ø 5 to Ø 7 mm
IP40
17.2 18.7
9
12.2
VF C01
10.5
10 8 15.3
8 10
8
51.3
Article
Description
Protection degree
VF C03
Protective terminal cover for screw terminals, snap-in attachment. Allows the stacked installation of switches
IP20
Accessories
10 pcs. packs 14
14
3
17
M12x1
2.5
M10x 0.75
Article
VF AC83
2.5
Description
Hexagonal threaded nut for microswitches with actuators D06, D08, D09
Items with withcode code on green on green background background are stock areitems stock items
General Catalogue 2015-2016
M12 x1
Article
VF AC72
Description
Hexagonal threaded nut for microswitches with actuators D10, D12, D13
Accessories See page 225
Article
Description
AC35
Hexagonal threaded nut notched for microswitches with actuators D15, D16
The 2D/3D files are available at www.pizzato.com
154
Microswitches MK series Description Microswitches of MK series have been developed in order to add new features to traditional and tested microswitches of Pizzato Elettrica. These products have been designed with shapes and fixing perfectly interchangeable with the previous ones and with various additional functions useful to extend the application field. The main innovation of this series is the tripping device modern and evolved, with qualitative features higher than solutions present on the market. The electrical contact on new microswitch has been realized with higher reliability technology, thanks to the double and redundant shape, and has the possibility to carry out operations with positive opening. The housing of the new microswitch provides the possibility to seat gaskets in order to seal the device against fine dusts or liquids up to IP65 degree. Fastening terminals of conductors are more practical and allow the fixing of different diameter cables or the possibility to choose different bends of faston contacts. For high quantity it’s possible to supply the microswitch only with the contact NO or NC, in order to minimize purchase costs.
Contact block reliability In the following table we refer to the typical microswitch contact structure (type A) normally used in the industry, compared with the innovative solution that Pizzato Elettrica uses in new MK series microswitches: movable contact with single interruption and double contacts (type B). As you can see from the table below, this last structure (type B) offers half of the contact resistance (R) than the simple mobile contact (type A) and a lower probability of failure (fe). In fact, defined x the probability of a commutation failure of a single interruption, it results that in the type A the failure probability fe=x, in the type B the probability fe x2. This means that if in a certain situation the probability of a single interruption failure x is equal, for instance, to 1x10-4 (1 failed interruption every 10,000) we will have: - for type A one failed commutation every 10,000. - for type B one failed commutation every 100,000,000 Type
Diagram
A
NO COMMON
Customar y microswitch B Pizzato MK series microswitch
Description
NC
NO
COMMON
NC
Contact Failure resistance R probability fe
mobile contact, single interruption
R=Rc
contacts with single interruption and double contacts
R=Rc/2
fe=x
fe
x2
Extended temperature range For the new MK series versions with extended temperature range are available on request. Differently from standard MK microswitches with temperature range from +85 C° to -25 C°, these special versions can be used in places where the ambient temperature changes from +85 C° to -40 °C. They can be installed inside cold stores, sterilizers or other equipment with very low ambient temperature. Special materials that have been used to realize these versions, maintain unchanged their features also in these conditions, widening the installation possibilities.
Microswitches for safety applications
safety lever
143
All microswitches that have the symbol beside the code are with positive opening, therefore suitable for safety applications. These microswitches are provided with a rigid connection between button and NC contacts, which are opened by force through a strong/sturdy internal safety lever. The positive opening has been realised in conformity with the standard EN 60947 5 1, enclosure K, therefore these microswitches are suitable for the installation for people’s protection.
General Catalogue 2015-2016
5 Protection degree IP65 By installing microswitches MK ••2••• with terminal covers VF MKC•22 or terminal covers VF MKC•23, it’s possible to obtain a microswitch fully dust proof and waterproof. Thanks to special rubber gaskets anti-oil, we achieve the protection degree IP65. For application with high presence of dirtiness, are available also versions with double gasket in the button (internal + external). ex. MK ••2•12 or MK ••2•13.
Gaskets Microswitch: MKV12D12 Terminal cover: VF MKCV22
Clamping screw plates for different diameter cables (MK V•) These clamping screw plates have a particular “roofing tile” structure and are connected loosely to the clamping screw. In this way, during the wires fixing, the clamping screw plate is able to suit to cables of different diameter (see picture) and tends to tighten the wires toward the screw instead of permitting them to escape towards the outside.
Stackable terminal covers with wiretrap cable gland New terminal covers supplied with wiretrap cable gland are provided for the protection degree up to IP65. These terminal covers are snap-in assembled and they have small dimensions in the microswitch profile, it’s possible to install them also on microswitches fixed side by side. See page 154.
Orientable actuators Thanks to the new patented lateral fixing system, it’s possible to rotate the roller of microswitches MK •••15 and MK •••17 in 90° steps. The lateral fixing allows to disconnect the actuator from the body also when the actuator is already fixed to the racket. The flexibility of the product allows also to unify items on stock for applications that require roller both longitudinal or transversal.
General Catalogue 2015-2016
144
5
Microswitches MK series
BUTTON DIRECT ACTION D01
D02
D03
D04
D05
D06
D08
LEVER DIRECT ACTION D30
D31
D32
D35
R30
R31
R32
R35
D37
D40
D42
R40
R42
LEVER INVERTED ACTION
LEVER BACK DIRECT ACTION
F30
F31
F32
F35
F40
F42
ACTUATORS product options accessory sold separately
1 1NO+1NC, snap action
2
3
1NO, snap action (on request)
1NC, snap action (on request)
V
H
F
faston 6.3 mm vertical
faston 6.3 mm 45° bend to right
TERMINALS
screws with self-lifting plate
145
G
faston 6,3 mm 45° bend to left (on request)
General Catalogue 2015-2016
5
D09
D10
D12
D13
external rubber gasket
external rubber gasket
D15
D17
D45
D46
D47
D53
D59
R45
R46
R47
R53
R59
F45
F46
F47
F53
F59
Code structure
D18
D19
D49
R60
F49
Attention! The feasibility of a code number does not mean the effective availability of a product. Please contact our sales office. article
options
MK V12D40-GR16T6 Terminal type
Ambient temperature
V
screws with self-lifting plate
H
vertical faston
F
faston, bent 45° to right
G
faston, bent 45° to left (on request)
-25°C … +85°C (standard) T6 Rollers standard roller
Contact blocks 1
1NO+1NC, snap action in deviation
2
1NO, snap action (on request)
3
1NC, snap action (on request)
IP40 (with terminal cover)
2
IP65 (with terminal cover)
R16
metal roller Ø 9.5x4 mm (only for actuators 40, 42,45, 47, 53, 59)
R10
large plastic roller Ø 9.8x8.4 mm (only for actuators 40, 42, 45, 53)
Contact type silver contacts (standard)
Maximum protection degree 1
G
silver contacts with 1 µm gold coating
Actuator
Actuation type
01
pin
D
direct action
02
pin
R
inverted action
03
narrow button
back direct action
..
................
F
General Catalogue 2015-2016
-40°C … +85°C
146
5
Microswitches MK series Technical data Housing Housing made of glass fiber reinforced technopolymer, self-extinguishing and shockproof. Protection degree acc. to EN 60529: IP00 without terminal cover IP20 (with terminal cover VF C01, VF C03) IP40 (with terminal cover VF MKC•1•, VF C02) IP65 (with terminal cover VF MKC•22 +
General data Ambient temperature: Max. actuation frequency: Mechanical endurance: Safety parameters: B10d: Tightening torques for installation:
MK V•2••• or VF MKC•23 + MK H•2•••)
-25°C … +85°C 3600 operating cycles1/hour 10 million operating cycles1 20,000,000 for NC contacts see pages 235-246
(1) One operation cycle means two movements, one to close and one to open contacts, as defined in EN 60947‑5‑1.
Main features Technopolymer housing High reliability contacts
Cable cross section (flexible copper strands) min. MK series: max.
1 x 0.34 mm2 2 x 1.5 mm2
(1 x AWG 22) (2 x AWG 16)
Protection degree up to IP65 4 terminal types available 47 actuators available Versions with positive opening Versions with gold-plated silver contacts Terminal covers with wiretrap cable gland
Markings and quality marks:
IMQ approval: UL approval: CCC approval: EAC approval:
CA02.05772 E131787 2013010305604291 RU C-IT ДМ94.В.01024
In conformity with standards: IEC 60947‑5‑1, EN 60947‑5‑1, IEC 60529, EN 60529, EN 60947‑1, IEC 60947‑1. Approvals: UL 508, CSA 22.2 No.14, EN 60947-1, EN 60947-5-1.
In conformity with the requirements of: Low Voltage Directive 2006/95/EC, Machinery Directive 2006/42/EC and EMC Directive 2004/108/EC. Positive contact opening in conformity with standards: IEC 60947‑5‑1, EN 60947‑5‑1.
Installation for safety applications: aside the product code. Always connect the safety circuit to the NC contacts (normally Use only microswitches marked with the symbol closed contacts) as stated in standard EN 60947‑5‑1, encl. K, par. 2. Actuate the switch at least up to the positive opening travel (CAP) stated aside the article code. Actuate the switch at least with the positive opening force (FAP) stated aside the article code. If not expressly indicated in this chapter, for correct installation and utilization of all articles see chapter utilization requirements from page 235 to page 246. Electrical data Thermal current (Ith): Rated insulation voltage (Ui): Rated impulse withstand voltage (Uimp): Conditional short circuit current: Protection against short circuits: Pollution degree: Dielectric strength
147
Utilization category 16 A 250 Vac 300 Vdc 4 kV 1000 A acc. to EN 60947‑5‑1 type gG fuse 16 A 250 V 3 2000 Vac/min.
Alternating current: AC15 (50 … 60 Hz) Ue (V) 250 120 Ie (A) 6 6 Direct current: DC13 Ue (V) 24 125 250 Ie (A) 5 0.6 0.3
General Catalogue 2015-2016
5 Characteristics approved by IMQ and CCC
Characteristics approved by UL
Rated insulation voltage (Ui): 250 Vac Conventional free air thermal current (Ith): 16 A Protection against short circuits: type gG fuse 16 A 250 V Rated impulse withstand voltage (Uimp): 4 kV Conditional short circuit current: 1000 A Protection degree of the housing: IP00 Terminals: screw terminals/faston Pollution degree: 3 Utilization category: AC15 Operating voltage (Ue): 250 Vac (50 Hz) Operating current (Ie): 5 A Forms of the contact element: X; Y; C Positive opening of contacts on contact blocks: 1, 3
Utilization categories
Q300 (69 VA, 125-250 Vdc) A300 (720 VA, 120 … 300 Vac)
In conformity with standard: UL 508, CSA 22.2 No.14
Please contact our technical service for the list of approved products.
In conformity with standards: EN 60947‑1, EN 60947‑5‑1+ A1:2009, fundamental requirements of the Low Voltage Directive 2006/95/EC. Please contact our technical service for the list of approved products.
Circuit diagram With direct and back direct action (F, D) NO
With inverted action (R)
COMMON
NC
Contacts with single interruption and double contacts
COMMON
NC
NO
COMMON
NC
NO
COMMON
NO
NC
FS operating force FR releasing force
OC over-travel CD differential travel
Maximumwith and Minimum page 245 - type 1 Microswitches directspeed action
All measures in the drawings are in mm
23.3
9.7
24.3 11.9
17.4
49.2
PC OC CD
4.2x5
12.2
11.9
4.2
25.4
18.4
26.3
24.3
4.2
4.2x5
Ø 2.5
14.6
9.7
Ø 2.5
14.6
16.6
23.3
1NO+1NC
OC
FAP positive opening force
25.4
12.2
11.9
17.4
49.2
0,5 mm 1,5 mm 0,05 mm
FS FR
MK V11D02
4N 3N
Maximum and Minimum speed page 245 - type 1
1NO+1NC
PC OC CD
FS FR
0,5 mm 2 mm 0,05 mm
4N 3N
Maximum and Minimum speed page 245 - type 1
23.3
Ø 3.8
23.3
28.1
PC pre-travel CAP positive opening travel
MK V11D01
Ø 3.8 Ø 7
25.4 49.2
11.9
PC OC CD
0,5 mm 2 mm 0,05 mm
FS FR
38.2
9.7
28.5
24.3
4.2 11.9
17.4
25.4
12.2
11.9
17.4
49.2
4N 3N
Maximum and Minimum speed page 245 - type 1
General Catalogue 2015-2016
14.6
24.3
1NO+1NC
4.2x5
12.2
4.2
4.2x5
MK V11D03
34.2
9.7
14.6
24.5
Ø 7
11.9
FR
FAP
OC
FAP
11.9
CD
FS
FR
CAP
CD
FS CAP
PC
PC
Actuation forces and travels
MK V11D04
1NO+1NC
PC OC CD
0,5 mm 2 mm 0,05 mm
FS FR
4N 3N
Maximum and Minimum speed page 245 - type 1
148
5
Microswitches MK series
23.3
Ø 6.8
Ø 6.8
MK V11D06
1NO+1NC
37.7
23.3
2.5
26.1
11.9
12.2
4N 3N 20 N
4N FS 0,5 mm PC 3N FR OC 5,5 mm 20 N FAP CD 0,05 mm CAP 2,2 mm Maximum and Minimum speed page 245 - type 1
MK V11D09
1NO+1NC
9.7
26.1
4.2x5
12.2
11.9
11.9
17.4
49.2
14 M12 x1
4.2
4.2 25.4
Ø 10.6
9.3
26.1
16.4
47.7
9.7
16.4
41.5
14
11.9
Ø 6.8
2.5
M12 x1
15.6
2.5
23.3
Ø 6.8
8.6 max.
23.3
17.4
4.8 max.
FS FR FAP
0,5 mm 5,5 mm 0,05 mm 2,2 mm
12.2
11.9
49.2
Maximum and Minimum speed page 245 - type 1
4.2x5
25.4
17.4
PC OC CD CAP
M10x0.75
4.2
4.2x5
11.9
Ø6.8
47.7
38
9.7 4.2
25.4
4N 3N 20 N
14
16.4
60.2
14
9.7
21.1 max.
2.5 50.5
28.1 11.9
1NO+1NC
38
FS FR FAP
Maximum and Minimum speed page 245 - type 1
M 10 x0.75
49.2
25.4
12.2 11.9
17.4
49.2
4N FS 0,5 mm PC 3N FR OC 5,5 mm 20 N FAP CD 0,05 mm CAP 2,2 mm Maximum and Minimum speed page 245 - type 1
MK V11D10
17.4
0,5 mm 3 mm 0,05 mm 2,2 mm
PC OC CD CAP
1NO+1NC
Ø 6.8
16.4 4.2x5
MK V11D08
12.2
11.9
8.6 max.
23.3
25.4 49.2
4N FS 0,5 mm PC 3N FR OC 2 mm 20 N FAP CD 0,05 mm CAP 2,2 mm Maximum and Minimum speed page 245 - type 1
MK V11D05
26.1 11.9
17.4
49.2
4.2
12.2
11.9
26.1
25.4
15.6
11.9
9.7
16.4 24.3
4.2x5
4.2
4.2x5
31.2
9.7
14.6
21.5
28
8
M 10 x0.75
51.2
23.3
4,5 N FS 0,5 mm PC 3N. FR OC 5,5 mm 20 N FAP CD 0,05 mm CAP 2,2 mm Maximum and Minimum speed page 245 - type 1
MK V11D12
1NO+1NC
1NO+1NC
Fixed only by threaded head
7 max.
3 33.6
M12x1
59.7
15
17
9.7
26.1
26.1 4.2
4.2x5 11.9
MK V11D13
Ø 17.2 17 M 12 x1
14
3.8
12
51.2
0.85 max.
2.5
2.5
Ø 6.8
16.4
41.5
25.1
23.3
1NO+1NC
25.4 49.2
PC OC CD CAP
14
12.2
11.9
FS FR FAP
0,6 mm 5,4 mm 0,05 mm 2,2 mm
12.2
49.2
17.4
6N. 4N 20 N
Maximum and Minimum speed page 245 - type 1
17.4
4N FS 0,5 mm MK V11D15 1NO+1NC PC 3N. FR OC 5,5 mm 20 N FAP CD 0,05 mm CAP 2,2 mm Maximum and Minimum speed page 245 - type 2
Fixed only by threaded head
MK V11D17
1NO+1NC
23.6
9.7 11.9
FS FR FAP
Items with withcode code on green on green background background are stock areitems stock items
4.2 25.4 49.2
17.4
0,5 mm 5,5 mm 0,05 mm 2,2 mm
26.1
49.6
40 4.2x5
4N 3N 20 N
Maximum and Minimum speed page 245 - type 2
149
Ø 10.5
12.2
49.2
PC OC CD CAP
23.3
16.4
59.7
8 max.
M12x1 17
26.1 14
3.6
12
12
15
3
33.6
3.8
MK V11D18
11.9
12.2 17.4
4N FS 0,5 mm PC 3N. FR OC 5,5 mm 20 N FAP CD 0,05 mm CAP 2,2 mm Maximum and Minimum speed page 245 - type 2
Accessories See page 225
1NO+1NC
The 2D/3D files are available at www.pizzato.com
General Catalogue 2015-2016
5 3.6
12
25.4
17.4
4N FS 0,5 mm PC 3N. FR OC 5,5 mm 20 N FAP CD 0,05 mm CAP 2,2 mm Maximum and Minimum speed page 245 - type 2
MK V11D30
1NO+1NC
R=26.2
FS FR
9 mm 10 mm 1,1 mm
PC OC CD
1NO+1NC
0,65 N 0,5 N
Maximum and Minimum speed page 245 - type 3
5
27.4
R= 54
13.7 9.7
29.5
32.9
17
0.9
23.3
17
29.7 17.4
5
0.9
12.2
11.9
49.2
37.1
49.2
9.7
4.2 11.9
12.2
29.7
11.9
38.4
28.7 13.7
17
26.1
9.7
16.4
4.2x5
4.2 25.4
11.9
MK V11D19
0.9
49.7
40
Ø 10.5
4.2x5
5
R= 63
23.6
23.6
23.3
25.4
1,66 N 1,32 N
MK V11D32
Maximum and Minimum speed page 245 - type 3
49.4
Ø 1
29.7
17
0.9
9.7
FS FR
0,28 N 0,22 N
MK V11D37
R= 37.5
0.9
PC OC CD
1NO+1NC
6,7 mm 7,8 mm 0,8 mm
FS FR
0,86 N 0,66 N
9.5
MK V11D42
1NO+1NC
11.9
MK V11D45
1NO+1NC
PC OC CD
3,5 mm 4,5 mm 0,4 mm
FS FR
1,66 N 1,28 N
Maximum and Minimum speed page 245 - type 6 Items with withcode code on green on green background background are stock areitems stock items
General Catalogue 2015-2016
1,09 N 0,84 N
Ø 9.5
35.9 11.9
17.4
49.2
FS FR
4.2
17
29.7
4.2x5
12.2
11.9
17.4
5,3 mm 5,7 mm 0,6 mm
43.9
34.2 13.7
25.4
PC OC CD
R=23.5
4.2
4.2
4.2x5
12.2
11.9
Maximum and Minimum speed page 245 - type 6
9.7
17
0.9
25.4 49.2
Maximum and Minimum speed page 245 - type 6
R= 24.6
4.2 11.9
17.4
49.2
MK V11D40
4.2x5
12.2
11.9
23.7
25.4
4.2
9.7
11.9
0,08 N 0,04 N
9.7
29.7
17
47.1
37.4 4.2
4.2x5
FS FR
19 mm 9,5 mm 2,3 mm
36
9.5
4.2
13.7
PC OC CD
1NO+1NC
9.7
17
0.9
17.4
Maximum and Minimum speed page 245 - type 3
Maximum and Minimum speed page 245 - type 3
R= 47.5
12.2
11.9
49.2
45.7
19 mm 16,7 mm 2,5 mm
25.4
4.2 25.4
11.9
1NO+1NC
PC OC CD
12.2 17.4
49.2
MK V11D46
45.6
PC OC CD
1NO+1NC
11.9
17.4
9.5
MK V11D35
4.2x5
12.2
11.9
49.2
13.7
25.4
4.2
11.9
0,76 N 0,58 N
Maximum and Minimum speed page 245 - type 3
9.7
4.2
4.2x5
FS FR
7,7 mm 8,3 mm 0,9 mm
R= 139
39.7 13.7
17
PC OC CD
1NO+1NC
5
R= 146.5
0.9
17.4
48.4
FS FR
4,54 mm 3,86 mm 0,42 mm
12.2
11.9
49.2
38.7
PC OC CD
1NO+1NC
11.9
17.4
29.7
MK V11D31
4.2x5
12.2
29.7
11.9
49.2
13.7
25.4
4.2
11.9
3,5 mm 4,5 mm 0,4 mm
FS FR
1,66 N 1,28 N
Maximum and Minimum speed page 245 - type 6 Accessories See page 225
The 2D/3D files are available at www.pizzato.com
150
5
Microswitches MK series It switches
It does not switch
4.2
R= 38.2
MK V11D49
35.8
9.7
29.7
17
48.1
0.9
4.2x5 11.9
25.4
12.2
11.9
17.4
49.2
7,7 mm 8,9 mm 0,9 mm
PC OC CD
1NO+1NC
4.2
42.9
9.5
38.4
R= 17.8
12.2
11.9
29.7
Maximum and Minimum speed page 245 - type 3
49.2
MK V11D53
17.4
Hand operated
1NO+1NC
4.2
13.7 4.2
25.4
26.1 9.7
1,66 N 1,28 N
9.7
17
0.9
12.2
11.9
49.2
29.7
FS FR
25.4
33.2
3,5 mm 4 mm 0,4 mm
R= 54
11.9
11.9
12.2 17.4
Maximum and Minimum speed page 245 - type 6
4.2x5
4.2
4.2x5
11.9
PC OC CD
1NO+1NC
13.7
17
29.7
13.7
25.4 49.2
0.9
13.7
MK V11D47
11.9
16.6
4.2
4.2x5
4.2
9.7
17
0.9
55.1
45.4
9.5
9.5
R= 24.6
FS FR
0,76 N 0,58 N
MK V11D59
Maximum and Minimum speed page 245 - type 6
2,5 mm 4,5 mm 0,2 mm
PC OC CD
1NO+1NC
2,3 N 1,77 N
FS FR
Maximum and Minimum speed page 245 - type 6
Microswitches with inverted action 5
11.9
25.4
11.9
25.4
17.4
49.2
MK V11R30
FS FR
4,4 mm 14 mm 1 mm
PC OC CD
1NO+1NC
31
23.8
21.3
9.7
4.2x5 12.2
11.9
4.2
4.2
4.2x5
13.7
17
33.2
29.7
23.5
13.7
8.1
9.7
17
8.1
5
R= 26.2
R= 63
12.2 17.4
11.9
49.2
0,6 N 0,4 N
MK V11R31
Maximum and Minimum speed page 245 - type 4
FS FR
0,7 mm 6,01 mm 0,23 mm
PC OC CD
1NO+1NC
1,47 N 0,72 N
Maximum and Minimum speed page 245 - type 4
5
R= 146.5
5
12.2
FS FR
3,7 mm 11,8 mm 0,8 mm
0,7 N 0,5 N
MK V11R35
Maximum and Minimum speed page 245 - type 4
11.9
25.4
1NO+1NC
PC OC CD
3,4 mm 10,3 mm 0,7 mm
9.7 11.9
17.4
FS FR
0,8 N 0,5 N
Maximum and Minimum speed page 245 - type 7 Items with withcode code on green on green background background are stock areitems stock items
151
4.2x5
12.2
11.9
49.2
MK V11R40
0,3 N 0,2 N
4.2
4.2
4.2
4.2x5
29.7
13.7
8.1
17
29.7
43.3
33.6
R= 37.5
9.7
13.7
8.1
FS FR
14,3 mm 25,7 mm 3,2 mm
Maximum and Minimum speed page 245 - type 7
4.2
9.5
R= 47.5
17.4
PC OC CD
1NO+1NC
12.2
11.9
42.7
PC OC CD
1NO+1NC
17
25.4 49.2
33
MK V11R32
11.9
17.4
49.2
29.7
11.9
9.5
25.4
13.7
11.9
4.2
4.2x5
4.2
4.2x5
9.7
17
29.7
32.7
23
13.7
8.1
9.7
17
8.1
37.3
R= 54
25.4
12.2
11.9
17.4
49.2
MK V11R42
1NO+1NC
PC OC CD
2,7 mm 7,9 mm 0,5 mm
FS FR
1,2 N 1,7 N
Maximum and Minimum speed page 245 - type 7 Accessories See page 225
The 2D/3D files are available at www.pizzato.com
General Catalogue 2015-2016
5 4.2
11.9
43.6
23.8
13.7
17
9.7 25.4
FS FR
1,5 mm 5,5 mm 0,3 mm
17.4
1,7 N 1N
MK V11R46
FS FR
3,5 mm 5,4 mm 0,2 mm
PC OC CD
1NO+1NC
1,5 N 1,45 N
Maximum and Minimum speed page 245 - type 7
It does not switch
4.2
R= 54
11.9
25.4 49.2
1NO+1NC
11.9
12.2
11.9
FS FR
1,7 mm 5,3 mm 0,3 mm
PC OC CD
25.4
1,7 N 1N
MK V11R53
43.7 29.7 17.4
FS FR
4,3 mm 11,6 mm 0,8 mm
PC OC CD
1NO+1NC
0,8 N 0,4 N
Maximum and Minimum speed page 245 - type 7 R= 39
4.2
9.5
12.2
11.9
49.2
17.4
Maximum and Minimum speed page 245 - type 7 R= 17.8
13.7 9.7
29.7
17
53.3
43.6 13.7 4.2
4.2x5
8.1
4.2x5
9.7
17
8.1
4.2
34
9.5
R= 24.6
9.5
It switches
12.2
11.9
49.2
Maximum and Minimum speed page 245 - type 7
MK V11R47
11.9
17.4
PC OC CD
1NO+1NC
4.2x5
12.2
11.9
4.2
MK V11R45
25.4 49.2
4.2
4.2
4.2x5
9.5
8.1
9.7
29.7
41.9
32.2 13.7
8.1
17
R= 23.5
4.2
R= 24.6
11.9
25.4
29.7
9.7
FS FR
1,5 mm 3,9 mm 0,3 mm
PC OC CD
1NO+1NC
11.9
17.4
49.2
MK V11R59
4.2x5
12.2
11.9
4.2
4.2
4.2x5
37.7 - 57.7
28 - 48 13.7
17
29.7
13.7
8.1
9.7
17
8.1
41.5
31.8
M 2.6
25.4
12.2
11.9
17.4
49.2
2,4 N 1,3 N
MK V11R60
Maximum and Minimum speed page 245 - type 7
FS FR
2,7 mm 9,2 mm 0,5 mm
PC OC CD
1NO+1NC
1,2 N 0,6 N
Maximum and Minimum speed page 245 - type 4
Microswitches with back direct action 5
11.9
25.4
0,6 N 0,5 N
Maximum and Minimum speed page 245 - type 5
35.8
11.9
25.4
1NO+1NC
PC OC CD
9.7 4.2x5
12.2
11.9
11.9
17.4
49.2
MK V11F32
2,5 mm 11,5 mm 0,3 mm
FS FR
General Catalogue 2015-2016
25.4
12.2
11.9
17.4
49.2
0,7 N 0,6 N
MK V11F35
Maximum and Minimum speed page 245 - type 5 Accessories See page 225
33.6
35
8.4
4.2
4.2
4.2x5
5
152.5
9.7
29.7
13.7
17
26.1
8.4
17.4
1,76 N FS 1,63 mm MK V11F31 1NO+1NC PC 1,08 N FR OC 4,64 mm 5,78 N FAP CD 0,17 mm CAP 5,72 mm Maximum and Minimum speed page 245 - type 5
5
R= 60
12.2
13.7
1NO+1NC
FS FR
17
MK V11F30
2,7 mm 12,9 mm 0,35 mm
11.9
49.2
49.2
PC OC CD
29.7
13.7 23.9 4.2
11.9
17.4
44.7
25.4
29.7
11.9
4.2x5
12.2
4.2
4.2x5
9.7
17
36.8
8.4
9.7
29.7
13.7
17
8.4
5
R= 32.2
27.1
R= 69
1NO+1NC
PC OC CD
7,5 mm 25,9 mm 1,3 mm
FS FR
0,25 N 0,2 N
Maximum and Minimum speed page 245 - type 5
The 2D/3D files are available at www.pizzato.com
152
5
Microswitches MK series
MK V11F42
8.4
9.7 4.2x5
12.2
11.9
17.4
25.4
49.2
1,3 N FS 1,1 mm PC 0,9 N FR OC 6,6 mm 6,9 N FAP CD 0,1 mm CAP 6,3 mm Maximum and Minimum speed page 245 - type 8
MK V11F46
1NO+1NC
R= 44.1
It does not switch
26 13.7 33.2 13.7
17
46.8
8.4
9.7
29.7
13.7
4.2
4.2
9.5
R= 23.8
9.7
17
1N FS 1,5 mm PC 0,7 N FR OC 7,5 mm 4,8 N FAP CD 0,2 mm CAP 9 mm Maximum and Minimum speed page 245 - type 5
4.2x5
11.9
12.2
11.9
25.4
12.2
11.9
49.2
PC OC CD
1NO+1NC
17.4
1NO+1NC
49.2
MK V11F53
12.2
11.9
FS FR
2,5 mm 11,5 mm 0,3 mm
0,7 N 0,6 N
MK V11F59
Maximum and Minimum speed page 245 - type 8
1NO+1NC
PC OC CD CAP
Maximum and Minimum speed page 245 - type 8 All measures in the drawings are in mm
19
6.3
6.3
19
19
19
19
6.4
6.4
19
19
12.7
12.7
6.3
6.3
12.7
12.7
6.3
6.3
Screw terminals V with plate
Vertical faston H terminals
12.7
12.7
6.3
Faston terminals F, right bending
12
12
45° 6.3
45°
14.3
8.5
9.7
19
6.3
7
12.2
10.8
1,7 N 1,3 N 8,9 N
FS FR FAP
0,8 mm 5,2 mm 0,08 mm 4,9 mm
Terminals outline dimensions 7
42.9
MK V11F49
4.2
37.1
R= 60
25.4
4.2
9.7
1,3 N FS 1,1 mm PC 0,9 N FR OC 5,6 mm 6,9 N FAP CD 0,1 mm CAP 6,3 mm Maximum and Minimum speed page 245 - type 8
11.9
25.4 49.2
1NO+1NC
4.2x5
11.9
12.2 17.4
11.9
8.4
8.4
4.2
4.2
25.4 49.2
9.5
MK V11F47
11.9
16.6
29.7
13.7
4.2x5
9.7
17
55
45.3
9.5
8.4
4.2x5
1,3 N FS 1,1 mm PC 0,9 N FR OC 6,6 mm 6,9 N FAP CD 0,1 mm CAP 6,3 mm Maximum and Minimum speed page 245 - type 8
4.2
R= 30.6
It switches
17.4
1NO+1NC
17
MK V11F45
12.2
11.9
49.2
35.7
11.9
29.7
25.4
29.7
11.9
4.2
4.2
4.2x5
29.7
4.2
9.5
4.2
17
13.7
43.6
33.9
R= 29.5
9.7
17
1N FS 1,6 mm PC 0,7 N FR OC 8,4 mm 4,9 N FAP CD 0,2 mm CAP 9 mm Maximum and Minimum speed page 245 - type 8 1NO+1NC
4.2
8.4
17.4
46.2
0,85 N 0,65 N
9.5
12.2
11.9
49.2
Maximum and Minimum speed page 245 - type 8 R= 30.6
25.4
29.7
FS FR
2,4 mm 10,4 mm 0,25 mm
PC OC CD
1NO+1NC
11.9
17.4
49.2
MK V11F40
4.2x5
12.2
11.9
36.5
25.4
13.7
11.9
45
35.3 13.7 9.7
29.7
17
46.1
8.4
9.7 4.2
4.2x5
4.2
9.5
R= 43.5
36.4 13.7
8.4
17
4.2
9.5
R= 53.5
6.3
12.7
12.7
6.3
Faston terminals G, left bending (on request)
Note: H vertical faston terminals can be bent according to one’s installation requirements. We recommend to bend the faston with an angle not higher than 45° and to carry out this operation no more than 5 times.
153
General Catalogue 2015-2016
5 Protections (terminal covers)
10 pcs. packs 17.4
17.4 52.4
8.2
52.4
16
9
38.6
32
25.1
16
18.5
9
13
13
8.2
65.4 65.4
Protective terminal cover for screw terminals snap-in assembled and with wiretrap cable gland. Allows the stacked installation of switches.
Protective terminal cover for vertical faston terminals with wiretrap cable gland, snap-in attachment. Allows the stacked installation of switches.
Article
Description
Protection degree
Article
Description
Protection degree
VF MKCV11
Protective terminal cover without gasket for multipolar cables from Ø 5 to Ø 7.5 mm
IP40
VF MKCH11
Protective terminal cover without gasket for multipolar cables from Ø 5 to Ø 7.5 mm
IP40
VF MKCV12
Protective terminal cover without gasket for multipolar cables from Ø 4 to Ø 7.5 mm
IP40
VF MKCH12
Protective terminal cover without gasket for multipolar cables from Ø 4 to Ø 7.5 mm
IP40
VF MKCV13
Protective terminal cover without gasket for multipolar cables from Ø 2 to Ø 5.5 mm
IP40
VF MKCH13
Protective terminal cover without gasket for multipolar cables from Ø 2 to Ø 5.5 mm
IP40
VF MKCV22
Protective terminal cover with gasket for multipolar cables from Ø 4 to Ø 7.5 mm
IP65
VF MKCH22
Protective terminal cover with gasket for multipolar cables from Ø 4 to Ø 7.5 mm
IP65
VF MKCV23
Protective terminal cover with gasket for multipolar cables from Ø 2 to Ø 5.5 mm
IP65
VF MKCH23
Protective terminal cover with gasket for multipolar cables from Ø 2 to Ø 5.5 mm
IP65
52.8
54
21.1
4.5
4.3
4.3
4.3
4.3
16.6
25
10
4.9
20.8
22.7
7.5 22.7
68.3
21
25.4 22
Ø 20
8.5
7.5
25.4
Article
54
Description
Protection degree
Article
IP20
VF C02
Protective terminal cover for screw terminals
Protection degree
Description
Protective terminal cover for screw terminals with cable gland PG9 for multipolar cables from Ø 5 to Ø 7 mm
IP40
17.2 18.7
9
12.2
VF C01
10.5
10 8 15.3
8 10
8
51.3
Article
Description
Protection degree
VF C03
Protective terminal cover for screw terminals, snap-in attachment. Allows the stacked installation of switches
IP20
Accessories
10 pcs. packs 14
14
3
17
M12x1
2.5
M10x 0.75
Article
VF AC83
2.5
Description
Hexagonal threaded nut for microswitches with actuators D06, D08, D09
Items with withcode code on green on green background background are stock areitems stock items
General Catalogue 2015-2016
M12 x1
Article
VF AC72
Description
Hexagonal threaded nut for microswitches with actuators D10, D12, D13
Accessories See page 225
Article
Description
AC35
Hexagonal threaded nut notched for microswitches with actuators D15, D16
The 2D/3D files are available at www.pizzato.com
154
