Model 375XL - Backflow Parts USA
Model 375XL
®
a
®
Reduced Pressure Principle Assembly
company
SPECIFICATION SUBMITTAL SHEET APPLICATION Ideal for use where lead-free* valves are required. Designed for installation on potable water lines to protect against both backsiphonage and backpressure of contaminated water into the potable water supply. Assembly shall provide protection where a potential health hazard exists.
STANDARDS COMPLIANCE ASSE® Listed 1013 IAPMO® Listed CSA® Certified B64.4 AWWA compliant C511 Approved by the Foundation for Cross Connection Control and Hydraulic Research at the University of Southern California NSF® Listed-Standard 61, Annex G (3/4" - 2") UL® Classified (less shut-off valves only, 3/4"-2") C-UL® Classified (less shut-off valves only, 3/4"-2") LEAD PLUMBING LAW COMPLIANCE
FEATURES Sizes: 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Maximum working water pressure 175 PSI Maximum working water temperature 180°F Hydrostatic test pressure 350 PSI End connections Threaded FNPT ANSI B1.20.1
MATERIALS Housing Fasteners Elastomers Internals Springs Ball Valves Struts
Reinforced Nylon, FDA approved Stainless Steel, 300 Series Silicone (FDA Approved) Buna Nitrile (FDA Approved) Delrin, Nylon, NSF Listed Stainless Steel, 300 series Cast Bronze, ASTM B 584 Forged Brass, ASTM B 124
OPTIONAL LEAD-FREE STRAINER (MODEL SXL)
H
WILKINS
D E
A
F
( 1-1/4” - 2” )
DIMENSIONS (approximate) MODEL 375XL SIZE
A LESS BALL VALVES
A
B in.
C mm
in.
D mm
in.
E
in.
mm
in.
mm
in.
mm
1/2
20
8 7/8
225
n/a
n/a 1 15/16 49 1 5/8
41 2 15/16 75 3 7/8
mm
in.
3/4
20
8 7/8
225
7 1/8
181 1 15/16 49 1 5/8
25 11 3/16 284
8 7/8
225
WEIGHT F
mm
in.
B
S KIN IL XL
DIMENSIONS & WEIGHTS (do not include pkg.)
C
175 PSIG 180˚ F
W
175 PSIG 180ß F
A F (1/2” - 1” )
G
G
375 RP
3/4" 375 RP
ZURN
S KIN IL XL
G
(CA H&S Code §116875, VSA §2470h)
*(0.25% MAX. WEIGHTED AVERAGE LEAD CONTENT) Lead Plumbing Law Certified by IAPMO R&T Annex G Certified by NSF International (3/4" - 2")
W
OPTIONS (Suffixes can be combined) - with full port QT ball valves (standard) L - less ball valves, male pipe thread S - with Model SXL lead-free bronze "Y" type strainer SH - with stainless steel handles FT - with integral male 45° flare SAE test fitting AG - with air gap SAG - with Model SXL lead-free bronze "Y" strainer and air gap BOF - with Blow out/Flush fitting B - with black fusion epoxy coated ball valves & struts for theft protection ACCESSORIES Repair kits Thermal expansion tank (Mdl. XT) Soft seated check valve (Mdl. 40XL) Shock arrester (Model 1250XL) QT-SET Quick Test Fitting Set D Test Cock Lock (Model TCL24) Blow out / Flush fitting E (RK34-375BOF (1/2" or 3/4"), RK1-375BOF C B or RK114-350-375BOF)
G
H
mm
in.
mm
98
12 1/4 311
3
76
in.
J mm
10 7/8 276
WITH BALL VALVES
in.
mm
lbs.
kg
lbs.
kg
12 1/4
311
4.7
2.1
5.7
2.6
41 2 15/16 75 3 7/8
98
12 5/8 321
3
76
2 1/4
57 2 1/4
57
3 7/16
87
102 14 9/16 370
4
102
1-1/4 32
14 7/8 378 14 3/8 367 3 3/8
86 3 3/8
86
3 3/4
95 5 3/4 146 20 1/2 521 3 3/4
95
1-1/2 40
15 1/4 387 14 3/8 367 3 3/8
86 3 3/8
86
3 3/4
95 5 3/4 146
22
559 4 1/2
114
86 3 3/8
86
3 3/4
95 5 3/4 146
24
610 4 3/4 120.7 20 3/4 527 20 3/4 527 19.4 8.8 23.5 10.7
1
2
50
16
406 14 3/8 367 3 3/8
4
11
LESS BALL VALVES
279
12 1/4
311
4.7
2.1
5.7
2.6
13 3/4 349
15 1/4
387
8.2
3.7
9.7
4.4
18
457 18 1/2 470 18.7 8.5 20.5 9.3
18 3/4 476 20 1/4 514 18.3 8.0 21.5 9.8
DOCUMENT #: REVISION: (Patent No. 6,513,543, 7,784,483 & 7,905,250) BF-375XL(SM) 7/12 WILKINS a Zurn company, 1747 Commerce Way, Paso Robles, CA 93446 Phone:805-238-7100 Fax:805-238-5766 Page 1 of 2
In Canada: ZURN INDUSTRIES LIMITED, 3544 Nashua Dr., Mississauga, Ontario L4V 1L2 Phone:905-405-8272 Fax:905-405-1292 Product Support Help Line: 877-BACKFLOW (877-222-5356) • Website: http://www.zurn.com
FLOW CHARACTERISTICS MODEL 375XL 1/2" - 1" (STANDARD & METRIC) FLOW RATES (l/s) 2.5
1.3
PRESSURE LOSS (PSIG)
30
5.0 207
3/4" (20mm)
1/2" (15mm)
20
3.8 1" (25mm)
138 69
10
0
0 0
20
40 FLOW RATES (GPM)
60
PRESSURE LOSS (kpa)
0.0
80
MODEL 375XL 1-1/4" - 2" (STANDARD & METRIC) 3.2
FLOW RATES (l/s)
6.3
PRESSURE LOSS (PSIG)
20
9.5
12.6
15.8 138
1-1/2" (40mm)
1-1/4" (32mm)
2" (50mm)
15
103
10
69
5
PRESSURE LOSS (kpa)
0.0
34 0
50
100
FLOW RATES (GPM)
150
200
250
⃟ Rated Flow (Established by approval agencies)
TYPICAL INSTALLATION Local codes shall govern installation requirements. To be installed in accordance with the manufacturers’ instructions and the latest edition of the Uniform Plumbing Code. Unless otherwise specified, the assembly shall be mounted at a minimum of 12” (305mm) and a maximum of 30” (762mm) above adequate drains with sufficient side clearance for testing and maintenance. The installation shall be made so that no part of the unit can be submerged.
Capacity thru Schedule 40 Pipe Pipe size 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"
5 ft/sec 3 5 8 13 23 32 52
7.5 ft/sec 4 7 12 20 35 48 78
10 ft/sec 6 9 17 27 47 63 105
15 ft/sec 9 14 25 40 70 95 167
MODEL 375XLSAG (SHOWN) B64.4
PROTECTIVE ENCLOSURE
375 RP
/ WILKINS
175 PSIG 180° F
(1-1/4” - 2”) 8 1/8 (1/2” - 1”) 5 1/2
3/4" 375 RP ZURN
S KIN IL XL
ZURN 1013
W
2
OPTIONAL LEAD-FREE STRAINER MODEL SXL
AIR GAP
OPTIONAL WATER METER
(1-1/4” - 2”) 3” PIPE (1/2” - 1”) 2” PIPE (DRAIN LINE CAN BE ANY STANDARD PIPING MATERIAL)
WILKINS
175 PSIG 180ß F
12" MIN. 30" MAX.
12" MIN. 30" MAX.
DIRECTION OF FLOW INDOOR INSTALLATION
INLET SHUT OFF
FLOOR DRAIN
FLOOR DRAIN
DIRECTION OF FLOW
OUTDOOR INSTALLATION
SPECIFICATIONS The Reduced Pressure Principle Backflow Preventer shall be ANSI 3rd party certified to comply with states' lead plumbing law 0.25% maximum weighted average lead content requirement, shall be ASSE® Listed 1013, rated to 180°F, and supplied with full port ball valves. The main body shall be Nylon and the seat disc elastomers shall be silicone. If installed indoors, the installation shall be supplied with an air gap adapter. The Reduced Pressure Principle Backflow Preventer shall be a WILKINS Model 375XL. WILKINS a Zurn company, 1747 Commerce Way, Paso Robles, CA 93446 Phone:805-238-7100 Fax:805-238-5766 IN CANADA: ZURN INDUSTRIES LIMITED, 3544 Nashua Dr., Mississauga, Ontario L4V 1L2 Phone:905-405-8272 Fax:905-405-1292 Product Support Help Line: 877-BACKFLOW (877-222-5356) • Website: http://www.zurn.com
Page 2 of 2
®
a
®
Reduced Pressure Principle Assembly
company
SPECIFICATION SUBMITTAL SHEET APPLICATION Ideal for use where lead-free* valves are required. Designed for installation on potable water lines to protect against both backsiphonage and backpressure of contaminated water into the potable water supply. Assembly shall provide protection where a potential health hazard exists.
STANDARDS COMPLIANCE ASSE® Listed 1013 IAPMO® Listed CSA® Certified B64.4 AWWA compliant C511 Approved by the Foundation for Cross Connection Control and Hydraulic Research at the University of Southern California NSF® Listed-Standard 61, Annex G (3/4" - 2") UL® Classified (less shut-off valves only, 3/4"-2") C-UL® Classified (less shut-off valves only, 3/4"-2") LEAD PLUMBING LAW COMPLIANCE
FEATURES Sizes: 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Maximum working water pressure 175 PSI Maximum working water temperature 180°F Hydrostatic test pressure 350 PSI End connections Threaded FNPT ANSI B1.20.1
MATERIALS Housing Fasteners Elastomers Internals Springs Ball Valves Struts
Reinforced Nylon, FDA approved Stainless Steel, 300 Series Silicone (FDA Approved) Buna Nitrile (FDA Approved) Delrin, Nylon, NSF Listed Stainless Steel, 300 series Cast Bronze, ASTM B 584 Forged Brass, ASTM B 124
OPTIONAL LEAD-FREE STRAINER (MODEL SXL)
H
WILKINS
D E
A
F
( 1-1/4” - 2” )
DIMENSIONS (approximate) MODEL 375XL SIZE
A LESS BALL VALVES
A
B in.
C mm
in.
D mm
in.
E
in.
mm
in.
mm
in.
mm
1/2
20
8 7/8
225
n/a
n/a 1 15/16 49 1 5/8
41 2 15/16 75 3 7/8
mm
in.
3/4
20
8 7/8
225
7 1/8
181 1 15/16 49 1 5/8
25 11 3/16 284
8 7/8
225
WEIGHT F
mm
in.
B
S KIN IL XL
DIMENSIONS & WEIGHTS (do not include pkg.)
C
175 PSIG 180˚ F
W
175 PSIG 180ß F
A F (1/2” - 1” )
G
G
375 RP
3/4" 375 RP
ZURN
S KIN IL XL
G
(CA H&S Code §116875, VSA §2470h)
*(0.25% MAX. WEIGHTED AVERAGE LEAD CONTENT) Lead Plumbing Law Certified by IAPMO R&T Annex G Certified by NSF International (3/4" - 2")
W
OPTIONS (Suffixes can be combined) - with full port QT ball valves (standard) L - less ball valves, male pipe thread S - with Model SXL lead-free bronze "Y" type strainer SH - with stainless steel handles FT - with integral male 45° flare SAE test fitting AG - with air gap SAG - with Model SXL lead-free bronze "Y" strainer and air gap BOF - with Blow out/Flush fitting B - with black fusion epoxy coated ball valves & struts for theft protection ACCESSORIES Repair kits Thermal expansion tank (Mdl. XT) Soft seated check valve (Mdl. 40XL) Shock arrester (Model 1250XL) QT-SET Quick Test Fitting Set D Test Cock Lock (Model TCL24) Blow out / Flush fitting E (RK34-375BOF (1/2" or 3/4"), RK1-375BOF C B or RK114-350-375BOF)
G
H
mm
in.
mm
98
12 1/4 311
3
76
in.
J mm
10 7/8 276
WITH BALL VALVES
in.
mm
lbs.
kg
lbs.
kg
12 1/4
311
4.7
2.1
5.7
2.6
41 2 15/16 75 3 7/8
98
12 5/8 321
3
76
2 1/4
57 2 1/4
57
3 7/16
87
102 14 9/16 370
4
102
1-1/4 32
14 7/8 378 14 3/8 367 3 3/8
86 3 3/8
86
3 3/4
95 5 3/4 146 20 1/2 521 3 3/4
95
1-1/2 40
15 1/4 387 14 3/8 367 3 3/8
86 3 3/8
86
3 3/4
95 5 3/4 146
22
559 4 1/2
114
86 3 3/8
86
3 3/4
95 5 3/4 146
24
610 4 3/4 120.7 20 3/4 527 20 3/4 527 19.4 8.8 23.5 10.7
1
2
50
16
406 14 3/8 367 3 3/8
4
11
LESS BALL VALVES
279
12 1/4
311
4.7
2.1
5.7
2.6
13 3/4 349
15 1/4
387
8.2
3.7
9.7
4.4
18
457 18 1/2 470 18.7 8.5 20.5 9.3
18 3/4 476 20 1/4 514 18.3 8.0 21.5 9.8
DOCUMENT #: REVISION: (Patent No. 6,513,543, 7,784,483 & 7,905,250) BF-375XL(SM) 7/12 WILKINS a Zurn company, 1747 Commerce Way, Paso Robles, CA 93446 Phone:805-238-7100 Fax:805-238-5766 Page 1 of 2
In Canada: ZURN INDUSTRIES LIMITED, 3544 Nashua Dr., Mississauga, Ontario L4V 1L2 Phone:905-405-8272 Fax:905-405-1292 Product Support Help Line: 877-BACKFLOW (877-222-5356) • Website: http://www.zurn.com
FLOW CHARACTERISTICS MODEL 375XL 1/2" - 1" (STANDARD & METRIC) FLOW RATES (l/s) 2.5
1.3
PRESSURE LOSS (PSIG)
30
5.0 207
3/4" (20mm)
1/2" (15mm)
20
3.8 1" (25mm)
138 69
10
0
0 0
20
40 FLOW RATES (GPM)
60
PRESSURE LOSS (kpa)
0.0
80
MODEL 375XL 1-1/4" - 2" (STANDARD & METRIC) 3.2
FLOW RATES (l/s)
6.3
PRESSURE LOSS (PSIG)
20
9.5
12.6
15.8 138
1-1/2" (40mm)
1-1/4" (32mm)
2" (50mm)
15
103
10
69
5
PRESSURE LOSS (kpa)
0.0
34 0
50
100
FLOW RATES (GPM)
150
200
250
⃟ Rated Flow (Established by approval agencies)
TYPICAL INSTALLATION Local codes shall govern installation requirements. To be installed in accordance with the manufacturers’ instructions and the latest edition of the Uniform Plumbing Code. Unless otherwise specified, the assembly shall be mounted at a minimum of 12” (305mm) and a maximum of 30” (762mm) above adequate drains with sufficient side clearance for testing and maintenance. The installation shall be made so that no part of the unit can be submerged.
Capacity thru Schedule 40 Pipe Pipe size 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"
5 ft/sec 3 5 8 13 23 32 52
7.5 ft/sec 4 7 12 20 35 48 78
10 ft/sec 6 9 17 27 47 63 105
15 ft/sec 9 14 25 40 70 95 167
MODEL 375XLSAG (SHOWN) B64.4
PROTECTIVE ENCLOSURE
375 RP
/ WILKINS
175 PSIG 180° F
(1-1/4” - 2”) 8 1/8 (1/2” - 1”) 5 1/2
3/4" 375 RP ZURN
S KIN IL XL
ZURN 1013
W
2
OPTIONAL LEAD-FREE STRAINER MODEL SXL
AIR GAP
OPTIONAL WATER METER
(1-1/4” - 2”) 3” PIPE (1/2” - 1”) 2” PIPE (DRAIN LINE CAN BE ANY STANDARD PIPING MATERIAL)
WILKINS
175 PSIG 180ß F
12" MIN. 30" MAX.
12" MIN. 30" MAX.
DIRECTION OF FLOW INDOOR INSTALLATION
INLET SHUT OFF
FLOOR DRAIN
FLOOR DRAIN
DIRECTION OF FLOW
OUTDOOR INSTALLATION
SPECIFICATIONS The Reduced Pressure Principle Backflow Preventer shall be ANSI 3rd party certified to comply with states' lead plumbing law 0.25% maximum weighted average lead content requirement, shall be ASSE® Listed 1013, rated to 180°F, and supplied with full port ball valves. The main body shall be Nylon and the seat disc elastomers shall be silicone. If installed indoors, the installation shall be supplied with an air gap adapter. The Reduced Pressure Principle Backflow Preventer shall be a WILKINS Model 375XL. WILKINS a Zurn company, 1747 Commerce Way, Paso Robles, CA 93446 Phone:805-238-7100 Fax:805-238-5766 IN CANADA: ZURN INDUSTRIES LIMITED, 3544 Nashua Dr., Mississauga, Ontario L4V 1L2 Phone:905-405-8272 Fax:905-405-1292 Product Support Help Line: 877-BACKFLOW (877-222-5356) • Website: http://www.zurn.com
Page 2 of 2
