Modular - Irby
Modular
Head and Arms for Loading Dock Lighting
The Phoenix Modular docklite® is made of modular components for greater flexibility and lower costs. These fixtures are designed to illuminate truck, trailer, and railcar environments.
Modular Head Specifications
Compliances
UL/cUL Listed: ► 153 Portable Work Lights • Suitable for Dry Locations ► Indoor (cUL)
Housing
High temperature polymer housing in safety yellow
Lamp
Accommodates up to 250W PAR 38/BR 40 lamps
Socket
Spring-loaded socket assembly
Hardware
Zinc-plated steel
Wire Guard
Zinc-plated steel
Electrical Plug
Recessed 3-prong IEC type (C-14)
Modular Arm Specifications
3 Year Warranty
A three-year limited warranty. See Standard Terms and Conditions for details.
Switch
On-off rocker switch and IEC type receptacle
Mounting Bracket
3/16 inch thick and 3 x 5 inch zinc-plated steel Wear-resistant 3 conductor AC cord
Wiring
Male plug on light head cord plugs in to female receptacle in arm 11/2 inch square steel tube arms with wrist-action, zinc-plated steel joint on 42 and 60 inch single-strut arms
Arm
Washers at all joints and bushings at bracket joints Thermoset powder coat paint in safety yellow
Finish
Modular Head Ordering Information
Example: DL-INC-LH
Series
Watt/Type
Part
DL
INC
LH
Watt/Type INC – Incandescent (PAR38/BR40) Note: Please see separate specification sheets for DLA 16W LED docklite® head.
Modular Arm Ordering Information
Example: DL-24-ARM
Series
Length
Part
DL
24 1
Arm
Options
(120V 1 Single-Strut Standard)
DS 2
42 1 60 1
Notes 1 - 277V units are available in a non-modular configuration. Please contact factory or see specification sheets for DLX Series or DWT Series. 2 - Double-Strut Arm. Single-Strut arm is standard. Available in 42 and 60 inch lengths only. DL-18-FAN requires 42 or 60 inch Double-Strut arm.
This Product meets the requirements for the Buy American Act, or BAA (US Code, Title 41, Section 10a-10d) and may also meet other country of origin requirements. For additional information, please visit our website, www.phoenixlighting.com. 8711 West Port Avenue • Milwaukee, WI 53224 USA • Telephone: +1 414.973.3300 • Toll Free: 800.438.1214 • Fax: +1 414.973.3210 www.phoenixlighting.com
Modular
Head and Arms for Loading Dock Lighting Light Head Includes a recessed 3-prong IEC (C-14) type plug which will plug directly into the receptacle of any single- or double-strut modular arm.
8.20 in (20.82 cm)
Incandescent (INC) • Low initial cost • Instant on • Excellent color rendering • Up to 4,200 hour lamp life • Output: Up to 3,700 lumens Available up to 250W. Lamp is not included. Uses PAR or BR lamps.
10.20 in (25.91 cm)
Single-Strut Arms Made from 11/2 inch square steel tubes, with a 3/16 inch thick 3 x 5 inch steel mounting bracket and a standard 3-conductor AC cord and 3-prong plug. A wrist-action joint (except on the 24 inch arm) permits multi-directional movement. An on-off rocker switch controls power to the head. Recommended mounting height is 5 feet 10 inches from the floor. 42 in Arm Effective Reach
24 in Arm Effective Reach
25.00 in (63.50 cm)
17.00 in (43.20 cm)
60 in Arm Effective Reach
35.00 in (88.90 cm)
24.00 in (61.00 cm)
8711 West Port Avenue • Milwaukee, WI 53224 USA • Telephone: +1 414.973.3300 • Toll Free: 800.438.1214 • Fax: +1 414.973.3210 www.phoenixlighting.com
Modular
Head and Arms for Loading Dock Lighting Double-Strut Arms Operates a light head/fan combination. Made from 11/2 inch square steel tubes with a 3-conductor AC cord with a standard 3-prong plug. An on-off rocker switch controls power to one of the two receptacles. A 3/16 inch steel bracket with a 5 x 17 inch footprint and three steel braces easily support the extra weight. Recommended mounting height is 6 feet 9 inches from the floor.
60 in Arm Effective Reach
42 in Arm Effective Reach
16.00 in (40.64 cm)
24.00 in (61.00cm)
34.00 in (86.40 cm)
24.00 in (61.00 cm)
Note: Please see separate specification sheet for Light-Duty Double-Strut Arms.
Accessories
Wire Lamp Guard Provides maximum protection against lamp theft or damage. Used as optional replacement for standard guard shipped with unit. Recommended for areas where lamp theft is a problem. Installs easily. Hinged for relamping. Will not fit over glare guards or polycarbonate guards. 71/2 in (19 cm) diameter. For modular heads and IR models. Order: WG-S (INC Only)
21.00 in (53.34 cm)
22.00 in (55.88 cm)
Polycarbonate Guard Protects against lamp damage and contains any glass from a broken lamp. Ideal for food processing applications. Use only with fixtures rated for 70W maximum. Order: PG-1
Fan Eighteen (18) inches in diameter, operates at 3 speeds providing up to 8250 CFM circulation. Front and rear chrome-plated safety grills enclose the blades. Rotates vertically and horizontally. Fan plugs directly into doublestrut arm. Weight: 18 lb. To support the fan’s weight use only with Double-Strut (DS) modular arms. Draws 2.6 Amps on high setting. Order: DL-FAN-18
8711 West Port Avenue • Milwaukee, WI 53224 USA • Telephone: +1 414.973.3300 • Toll Free: 800.438.1214 • Fax: +1 414.973.3210 www.phoenixlighting.com
Modular
Head and Arms for Loading Dock Lighting Lamping & Amperage Draw Data
Light Head
Type
Watts
Bulb
Base
Phoenix Part No.
Amp Draw 120V
INC
Incandescent
Up to 250
–
–
–
2.30
Amp draw is calculated using highest wattage lamp allowable.
Dimensions
3.00 in (7.62 cm) (4) HOLES FOR 3/ 8 in MTG BOLTS
2.30 in (5.84 cm)
5.00 in (12.70 cm) (8) HOLES FOR 1/ 2 in MTG BOLTS
4.00 in (10.20 cm)
5.00 in (12.70 cm) 5.00 in (12.70 cm)
4.60 in 20.00 in (50.80 cm) (11.70 cm) 3.40 in (8.6cm)
Wall Mounting Plate for 24 inch, 42 inch and 60 inch Single-Strut Arms
5.00 in (12.70 cm)
Wall Mounting Plate for Double-Strut Arms
Phoenix has taken reasonable steps to ensure that the information contained herein is accurate. While we believe the information is accurate, no warranty is made or implied. Product design and specifications are subject to change without notice. The most current version of this specification sheet can be found on our website, www.phoenixlighting.com. 050214
N5610208N 8711 West Port Avenue • Milwaukee, WI 53224 USA • Telephone: +1 414.973.3300 • Toll Free: 800.438.1214 • Fax: +1 414.973.3210 www.phoenixlighting.com
Head and Arms for Loading Dock Lighting
The Phoenix Modular docklite® is made of modular components for greater flexibility and lower costs. These fixtures are designed to illuminate truck, trailer, and railcar environments.
Modular Head Specifications
Compliances
UL/cUL Listed: ► 153 Portable Work Lights • Suitable for Dry Locations ► Indoor (cUL)
Housing
High temperature polymer housing in safety yellow
Lamp
Accommodates up to 250W PAR 38/BR 40 lamps
Socket
Spring-loaded socket assembly
Hardware
Zinc-plated steel
Wire Guard
Zinc-plated steel
Electrical Plug
Recessed 3-prong IEC type (C-14)
Modular Arm Specifications
3 Year Warranty
A three-year limited warranty. See Standard Terms and Conditions for details.
Switch
On-off rocker switch and IEC type receptacle
Mounting Bracket
3/16 inch thick and 3 x 5 inch zinc-plated steel Wear-resistant 3 conductor AC cord
Wiring
Male plug on light head cord plugs in to female receptacle in arm 11/2 inch square steel tube arms with wrist-action, zinc-plated steel joint on 42 and 60 inch single-strut arms
Arm
Washers at all joints and bushings at bracket joints Thermoset powder coat paint in safety yellow
Finish
Modular Head Ordering Information
Example: DL-INC-LH
Series
Watt/Type
Part
DL
INC
LH
Watt/Type INC – Incandescent (PAR38/BR40) Note: Please see separate specification sheets for DLA 16W LED docklite® head.
Modular Arm Ordering Information
Example: DL-24-ARM
Series
Length
Part
DL
24 1
Arm
Options
(120V 1 Single-Strut Standard)
DS 2
42 1 60 1
Notes 1 - 277V units are available in a non-modular configuration. Please contact factory or see specification sheets for DLX Series or DWT Series. 2 - Double-Strut Arm. Single-Strut arm is standard. Available in 42 and 60 inch lengths only. DL-18-FAN requires 42 or 60 inch Double-Strut arm.
This Product meets the requirements for the Buy American Act, or BAA (US Code, Title 41, Section 10a-10d) and may also meet other country of origin requirements. For additional information, please visit our website, www.phoenixlighting.com. 8711 West Port Avenue • Milwaukee, WI 53224 USA • Telephone: +1 414.973.3300 • Toll Free: 800.438.1214 • Fax: +1 414.973.3210 www.phoenixlighting.com
Modular
Head and Arms for Loading Dock Lighting Light Head Includes a recessed 3-prong IEC (C-14) type plug which will plug directly into the receptacle of any single- or double-strut modular arm.
8.20 in (20.82 cm)
Incandescent (INC) • Low initial cost • Instant on • Excellent color rendering • Up to 4,200 hour lamp life • Output: Up to 3,700 lumens Available up to 250W. Lamp is not included. Uses PAR or BR lamps.
10.20 in (25.91 cm)
Single-Strut Arms Made from 11/2 inch square steel tubes, with a 3/16 inch thick 3 x 5 inch steel mounting bracket and a standard 3-conductor AC cord and 3-prong plug. A wrist-action joint (except on the 24 inch arm) permits multi-directional movement. An on-off rocker switch controls power to the head. Recommended mounting height is 5 feet 10 inches from the floor. 42 in Arm Effective Reach
24 in Arm Effective Reach
25.00 in (63.50 cm)
17.00 in (43.20 cm)
60 in Arm Effective Reach
35.00 in (88.90 cm)
24.00 in (61.00 cm)
8711 West Port Avenue • Milwaukee, WI 53224 USA • Telephone: +1 414.973.3300 • Toll Free: 800.438.1214 • Fax: +1 414.973.3210 www.phoenixlighting.com
Modular
Head and Arms for Loading Dock Lighting Double-Strut Arms Operates a light head/fan combination. Made from 11/2 inch square steel tubes with a 3-conductor AC cord with a standard 3-prong plug. An on-off rocker switch controls power to one of the two receptacles. A 3/16 inch steel bracket with a 5 x 17 inch footprint and three steel braces easily support the extra weight. Recommended mounting height is 6 feet 9 inches from the floor.
60 in Arm Effective Reach
42 in Arm Effective Reach
16.00 in (40.64 cm)
24.00 in (61.00cm)
34.00 in (86.40 cm)
24.00 in (61.00 cm)
Note: Please see separate specification sheet for Light-Duty Double-Strut Arms.
Accessories
Wire Lamp Guard Provides maximum protection against lamp theft or damage. Used as optional replacement for standard guard shipped with unit. Recommended for areas where lamp theft is a problem. Installs easily. Hinged for relamping. Will not fit over glare guards or polycarbonate guards. 71/2 in (19 cm) diameter. For modular heads and IR models. Order: WG-S (INC Only)
21.00 in (53.34 cm)
22.00 in (55.88 cm)
Polycarbonate Guard Protects against lamp damage and contains any glass from a broken lamp. Ideal for food processing applications. Use only with fixtures rated for 70W maximum. Order: PG-1
Fan Eighteen (18) inches in diameter, operates at 3 speeds providing up to 8250 CFM circulation. Front and rear chrome-plated safety grills enclose the blades. Rotates vertically and horizontally. Fan plugs directly into doublestrut arm. Weight: 18 lb. To support the fan’s weight use only with Double-Strut (DS) modular arms. Draws 2.6 Amps on high setting. Order: DL-FAN-18
8711 West Port Avenue • Milwaukee, WI 53224 USA • Telephone: +1 414.973.3300 • Toll Free: 800.438.1214 • Fax: +1 414.973.3210 www.phoenixlighting.com
Modular
Head and Arms for Loading Dock Lighting Lamping & Amperage Draw Data
Light Head
Type
Watts
Bulb
Base
Phoenix Part No.
Amp Draw 120V
INC
Incandescent
Up to 250
–
–
–
2.30
Amp draw is calculated using highest wattage lamp allowable.
Dimensions
3.00 in (7.62 cm) (4) HOLES FOR 3/ 8 in MTG BOLTS
2.30 in (5.84 cm)
5.00 in (12.70 cm) (8) HOLES FOR 1/ 2 in MTG BOLTS
4.00 in (10.20 cm)
5.00 in (12.70 cm) 5.00 in (12.70 cm)
4.60 in 20.00 in (50.80 cm) (11.70 cm) 3.40 in (8.6cm)
Wall Mounting Plate for 24 inch, 42 inch and 60 inch Single-Strut Arms
5.00 in (12.70 cm)
Wall Mounting Plate for Double-Strut Arms
Phoenix has taken reasonable steps to ensure that the information contained herein is accurate. While we believe the information is accurate, no warranty is made or implied. Product design and specifications are subject to change without notice. The most current version of this specification sheet can be found on our website, www.phoenixlighting.com. 050214
N5610208N 8711 West Port Avenue • Milwaukee, WI 53224 USA • Telephone: +1 414.973.3300 • Toll Free: 800.438.1214 • Fax: +1 414.973.3210 www.phoenixlighting.com
