Monsoon Outdoor Banner Display Frame
Monsoon Outdoor Banner Display Frame A large format banner ‘A’ frame made from lightweight aluminium, ideal for use with PVC eyelet banners. Available in two sizes Monsoon is very easy to use, reusable and is the perfect graphics carrier for venues, events, exhibitions, promotions and indoor or outdoor shows. fea t ur es & benefit s
Graphic dimensions & eyelet locations
30mm (1.18”)
30mm (1.18”)
840mm (33.1”)
2340mm (92.13”)
770mm (30.3”) between centres
Indoor or outdoor banner system
•
Suitable for single or double sided display
•
2 frame sizes 1000mm x 2500mm and 1250mm x 3000mm
•
Extension kits available
•
Natural finish 25mm (1”) square aluminium tubes with reinforced plastic mouldings
•
Easy push-fit assembly, no tools necessary
•
Graphics are secured to the frame with elastic bungee cords
•
Supplied complete carry bag
•
Flat packs for easy transportation
•
Recommended for use in wind conditions upto Beaufort Scale 5
Extension kits
Graphic suitable for 1000 x 2500mm frame
1000 x 2500 frame Each extension kit increases the assembled width by 1237.50mm (48.72”) approx
2840mm (111.8”)
1090mm (42.9”)
1250 x 3000 frame Each extension kit increases the assembled width by 1487.50mm (58.56”) approx 30mm (1.18”)
30mm (1.18”)
•
925mm (36.42”) between centres
To calculate graphic widths deduct 160mm (6.30”) approx from the extended frame size Extension kits include: Horizontal tube x4 Centre ‘A’ frame x1 Ground peg x2 Elastic bungee cord x8
Graphic suitable for 1250 x 3000mm frame
All dimensions are approx.
hardware specifications Assembled Dimensions (mm) 1000 x 2500 frame 975 (h) x 2500 (w) x 640 (d) approx 38.39” (h) x 98.43” (w) x 25.20” (d) approx
REV 2 01/07
1250 x 3000 frame 1200 (h) x 3000 (w) x 795 (d) approx 47.24” (h) x 118.11” (w) x 31.30” (d) approx Weight (including carry bag): 1000 x 2500 frame
8kg (17.6lbs) approx.
1250 x 3000 frame
9kg (19.8lbs) approx.
graphic specifications
additional info
Visible Graphic Dimensions (mm): As above diagrams Substrate: Lightweight outdoor banner material (solid or mesh type substrates) Eyelets: Graphic requires 8 off eyelets with 11.5mm (0.45”) recommended minimum internal diameter.
We are continually improving and modifying our product range and reserve the right to vary the specifications without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE.
Recommended Accessories: 1250mm x 150mm diameter cardboard/tube carry bag for transporting graphics 1000 x 2500 Extension kit 1250 x 3000 Extension kit
Assembly Instructions A
Frame assembly
B
1
2
C D F
E
Kit Includes: Carry bag (A) Horizontal tube x8 (B) Centre ‘A’ frame x1 (C) End ‘A’ frame x 2 (D) Ground peg x6 (E) and Elastic bungee cord x24 (F)
Open up all the End and Centre ‘A’ frames
4
3
5
6
Push fit the bottom horizontal tubes into the ‘A’ frames, ensure the plastic joiners face inwards
Push fit the top horizontal tubes into the ‘A’ frames, ensure the plastic joiners face inwards
B
Push each locking arm down to secure the frame
D C
D
Ground peg fixing
Graphic attachment 1
3
2
Pass the elastic bungee cord through the graphic eyelet and around the frame to secure Corner eyelets require a bungee cord loop around the top and the side of the frame to secure
1
2
To secure the frame to grassed areas, push or hammer the ground peg into the ground
Ensure the ground peg covers the horizontal tube
Graphic dimensions & eyelet locations
30mm (1.18”)
30mm (1.18”)
840mm (33.1”)
2340mm (92.13”)
770mm (30.3”) between centres
Indoor or outdoor banner system
•
Suitable for single or double sided display
•
2 frame sizes 1000mm x 2500mm and 1250mm x 3000mm
•
Extension kits available
•
Natural finish 25mm (1”) square aluminium tubes with reinforced plastic mouldings
•
Easy push-fit assembly, no tools necessary
•
Graphics are secured to the frame with elastic bungee cords
•
Supplied complete carry bag
•
Flat packs for easy transportation
•
Recommended for use in wind conditions upto Beaufort Scale 5
Extension kits
Graphic suitable for 1000 x 2500mm frame
1000 x 2500 frame Each extension kit increases the assembled width by 1237.50mm (48.72”) approx
2840mm (111.8”)
1090mm (42.9”)
1250 x 3000 frame Each extension kit increases the assembled width by 1487.50mm (58.56”) approx 30mm (1.18”)
30mm (1.18”)
•
925mm (36.42”) between centres
To calculate graphic widths deduct 160mm (6.30”) approx from the extended frame size Extension kits include: Horizontal tube x4 Centre ‘A’ frame x1 Ground peg x2 Elastic bungee cord x8
Graphic suitable for 1250 x 3000mm frame
All dimensions are approx.
hardware specifications Assembled Dimensions (mm) 1000 x 2500 frame 975 (h) x 2500 (w) x 640 (d) approx 38.39” (h) x 98.43” (w) x 25.20” (d) approx
REV 2 01/07
1250 x 3000 frame 1200 (h) x 3000 (w) x 795 (d) approx 47.24” (h) x 118.11” (w) x 31.30” (d) approx Weight (including carry bag): 1000 x 2500 frame
8kg (17.6lbs) approx.
1250 x 3000 frame
9kg (19.8lbs) approx.
graphic specifications
additional info
Visible Graphic Dimensions (mm): As above diagrams Substrate: Lightweight outdoor banner material (solid or mesh type substrates) Eyelets: Graphic requires 8 off eyelets with 11.5mm (0.45”) recommended minimum internal diameter.
We are continually improving and modifying our product range and reserve the right to vary the specifications without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE.
Recommended Accessories: 1250mm x 150mm diameter cardboard/tube carry bag for transporting graphics 1000 x 2500 Extension kit 1250 x 3000 Extension kit
Assembly Instructions A
Frame assembly
B
1
2
C D F
E
Kit Includes: Carry bag (A) Horizontal tube x8 (B) Centre ‘A’ frame x1 (C) End ‘A’ frame x 2 (D) Ground peg x6 (E) and Elastic bungee cord x24 (F)
Open up all the End and Centre ‘A’ frames
4
3
5
6
Push fit the bottom horizontal tubes into the ‘A’ frames, ensure the plastic joiners face inwards
Push fit the top horizontal tubes into the ‘A’ frames, ensure the plastic joiners face inwards
B
Push each locking arm down to secure the frame
D C
D
Ground peg fixing
Graphic attachment 1
3
2
Pass the elastic bungee cord through the graphic eyelet and around the frame to secure Corner eyelets require a bungee cord loop around the top and the side of the frame to secure
1
2
To secure the frame to grassed areas, push or hammer the ground peg into the ground
Ensure the ground peg covers the horizontal tube
