Motorola Moto 360 Rear Cover Replacement
Motorola Moto 360 Rear Cover Replacement
Motorola Moto 360 Rear Cover Replacement This guide covers removing the rear cover of the Moto 360.
Written By: Cole Twitchell
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Motorola Moto 360 Rear Cover Replacement
INTRODUCTION This panel should be removed to get to all of the watch's insides. It is extremely fragile, so use caution when removing it.
TOOLS: iOpener Kit (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Motorola Moto 360 Rear Cover Replacement
Step 1 — Rear Cover
Set the watch face down on a flat surface.
Place the heated iOpener on the face of the rear cover to loosen the adhesive underneath.
Step 2
Gently slide the blue opening pick between the rear cover and the metal casing.
The rear cover is extremely fragile. Be very delicate when using the opening pick.
Work your way entirely around the rear cover.
It may take several attempts of reheating the adhesive to get the rear cover loose enough to pull off. © iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
Motorola Moto 360 Rear Cover Replacement
Step 3
Once the adhesive has been successfully loosened, gently pull the rear cover off.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-11 04:17:35 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
Motorola Moto 360 Rear Cover Replacement This guide covers removing the rear cover of the Moto 360.
Written By: Cole Twitchell
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Motorola Moto 360 Rear Cover Replacement
INTRODUCTION This panel should be removed to get to all of the watch's insides. It is extremely fragile, so use caution when removing it.
TOOLS: iOpener Kit (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Motorola Moto 360 Rear Cover Replacement
Step 1 — Rear Cover
Set the watch face down on a flat surface.
Place the heated iOpener on the face of the rear cover to loosen the adhesive underneath.
Step 2
Gently slide the blue opening pick between the rear cover and the metal casing.
The rear cover is extremely fragile. Be very delicate when using the opening pick.
Work your way entirely around the rear cover.
It may take several attempts of reheating the adhesive to get the rear cover loose enough to pull off. © iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
Motorola Moto 360 Rear Cover Replacement
Step 3
Once the adhesive has been successfully loosened, gently pull the rear cover off.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-11 04:17:35 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
