Motorola Razr V3c Face-Screen Replacement
Motorola Razr V3c Face-Screen Replacement
Motorola Razr V3c Face-Screen Replacement rough draft.
Written By: Nigel
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 7
Motorola Razr V3c Face-Screen Replacement
INTRODUCTION rough draft
TOOLS: 1.5mm Hex Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 7
Motorola Razr V3c Face-Screen Replacement
Step 1 — Face-Screen
Find a work space that will allow you to take a part the phone. You will need to place the screws in a place where they will be easy found--in order to reassemble.
Open the face of the phone.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 7
Motorola Razr V3c Face-Screen Replacement
Step 3
Use a 1.5mm Hex tool to take off the four screws that are located around the face plate.
Once the four screws are off, use a flat surfaced tool to click the facescreen cover off.
Step 4
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 7
Motorola Razr V3c Face-Screen Replacement
Step 5
Check in: Once the cover to the face-screen is off, your work area should look like this.
Since there is nothing securing the face-screen, all you must do is remove it using your fingers.
Step 6
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 7
Motorola Razr V3c Face-Screen Replacement
Step 7
After the face-screen is off and out of it's casing, you may replace it with one that works.
Time to put it back together! Place the new face-screen in the casing, then place the come back on it.
Step 8
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 7
Motorola Razr V3c Face-Screen Replacement
Step 9
Screw in the the four screws and your all done. Have fun with your new phone.
Enjoy your newly inserted face-screen. This document was last generated on 2017-06-25 12:06:56 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 7 of 7
Motorola Razr V3c Face-Screen Replacement rough draft.
Written By: Nigel
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 7
Motorola Razr V3c Face-Screen Replacement
INTRODUCTION rough draft
TOOLS: 1.5mm Hex Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 7
Motorola Razr V3c Face-Screen Replacement
Step 1 — Face-Screen
Find a work space that will allow you to take a part the phone. You will need to place the screws in a place where they will be easy found--in order to reassemble.
Open the face of the phone.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 7
Motorola Razr V3c Face-Screen Replacement
Step 3
Use a 1.5mm Hex tool to take off the four screws that are located around the face plate.
Once the four screws are off, use a flat surfaced tool to click the facescreen cover off.
Step 4
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 7
Motorola Razr V3c Face-Screen Replacement
Step 5
Check in: Once the cover to the face-screen is off, your work area should look like this.
Since there is nothing securing the face-screen, all you must do is remove it using your fingers.
Step 6
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 7
Motorola Razr V3c Face-Screen Replacement
Step 7
After the face-screen is off and out of it's casing, you may replace it with one that works.
Time to put it back together! Place the new face-screen in the casing, then place the come back on it.
Step 8
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 7
Motorola Razr V3c Face-Screen Replacement
Step 9
Screw in the the four screws and your all done. Have fun with your new phone.
Enjoy your newly inserted face-screen. This document was last generated on 2017-06-25 12:06:56 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 7 of 7
