Mouse Glove
Mouse Glove Dylan C. 13 Missouri
I came up with this idea at a friend’s house when we were playing computer games, and as I was playing with his unusually flat computer mouse. I thought how cool would it be if I had a computer mouse attached to my hand. So then I revised and hoped for the best.
There have been ideas like this before but those ideas were used for therapeutic purposes only. Plus those mice couldn’t be used for most every day activities because of the supports which keep you hand in one position. Here is the website http://www.gizmag.com/airmouse- wearable-mouse/13993/ The cold heat soldering iron is a soldering iron that will not get hot unless touching the solder or metal. Check that out here http://www.coldheat.com/
This mouse is made so the sensor is in the palm of your hand, the left and right click buttons on the index and middle finger. With scroll button on your ring finger. The mouse is also wireless.
this is me holding the mouse head on
this is the near finished sensor
this is the mouse straight down
testing the mouse off the glove
.
At first the mouse we were using, had a very odd shaped circuit board and had an impossible amount of soldering required that at full attempt would fry the circuit. We decided to try and it was surprisingly going pretty well… but shortly after we lost the wireless adapter and the entire project came to a halt. I applied for I thirty dollar grant to get new materials, and the grant was won. The advantage with the new mouse was that it had less soldering required and was larger so it was easier to solder. Another large barricade was our soldering was a cold heat which means it does not get hot it just sends an electric current through the solder to melt it. This was very difficult! So half way through the project we get a safe to use heating soldering iron, and this was so much easier that the project began to sail smoothly until its lovely completion.
Have you ever been using your computer mouse and the surface just didn’t work? Or have you ever had no place to use your computer mouse? Well then I’ve got a product for you! The mouse glove the computer mouse you can wear! This new product allows you to use the computer mouse on nearly any surface, and since it’s so versatile you can use it on the wall. Or any surface you find needed. Mouse glove buy yours now Only available while supplies last
I came up with this idea at a friend’s house when we were playing computer games, and as I was playing with his unusually flat computer mouse. I thought how cool would it be if I had a computer mouse attached to my hand. So then I revised and hoped for the best.
There have been ideas like this before but those ideas were used for therapeutic purposes only. Plus those mice couldn’t be used for most every day activities because of the supports which keep you hand in one position. Here is the website http://www.gizmag.com/airmouse- wearable-mouse/13993/ The cold heat soldering iron is a soldering iron that will not get hot unless touching the solder or metal. Check that out here http://www.coldheat.com/
This mouse is made so the sensor is in the palm of your hand, the left and right click buttons on the index and middle finger. With scroll button on your ring finger. The mouse is also wireless.
this is me holding the mouse head on
this is the near finished sensor
this is the mouse straight down
testing the mouse off the glove
.
At first the mouse we were using, had a very odd shaped circuit board and had an impossible amount of soldering required that at full attempt would fry the circuit. We decided to try and it was surprisingly going pretty well… but shortly after we lost the wireless adapter and the entire project came to a halt. I applied for I thirty dollar grant to get new materials, and the grant was won. The advantage with the new mouse was that it had less soldering required and was larger so it was easier to solder. Another large barricade was our soldering was a cold heat which means it does not get hot it just sends an electric current through the solder to melt it. This was very difficult! So half way through the project we get a safe to use heating soldering iron, and this was so much easier that the project began to sail smoothly until its lovely completion.
Have you ever been using your computer mouse and the surface just didn’t work? Or have you ever had no place to use your computer mouse? Well then I’ve got a product for you! The mouse glove the computer mouse you can wear! This new product allows you to use the computer mouse on nearly any surface, and since it’s so versatile you can use it on the wall. Or any surface you find needed. Mouse glove buy yours now Only available while supplies last
