mueller
MUELLER®
N.R.S. Resilient Wedge Gate Valves
q P-2361-16 (with M.J. Accessories+) q P-2361-19 (less M.J. Accessories)
FLANGED X MECHANICAL JOINT ENDS Indicator Post Style Stuffing box 2" Square Operating Nut
• 4", 6", 8", 10" and 12" sizes • Meets or exceeds all applicable requirements of UL 262 and FM 1120/1130 specifications and certified to ANSI/NSF 61 & 372. • Ductile iron body with Mueller® PRO-GARD® fusion epoxy coated interior and exterior surfaces • Non-rising bronze stem • Rubber encapsulated iron wedge
Options
• Stainless steel fasteners: Type 316 • ASTM B98-C66100/H02 stem
• 350psig (2400 kPa/24 barg) maximum working pressure, 700psig (4800 kPa/48 barg) static test • Triple O-ring seal stuffing box (2 upper & 1 lower O-rings) • Epoxy coating meets or exceeds ANSI/AWWA C550. • Flanged end drilling complies with ANSI B16.42 Class 150***
• Stainless steel stem: Type 304 and Type 316 • EPDM disc and o-rings
PARTS LIST
Catalog Part Number G-16 G-27 G-41 G-49 G-152 G-200 G-201 G-203 G-205 G-206 G-208 G-209 G-210 G-211 G-212
Description
Material
Material Standard
Bonnet Bolts & Nuts Wrench Nut Stuffing Box Bolts and Nuts Stem O-rings (3) Stuffing Box Wrench Nut Cap Screw Stuffing Box Seal Stem Stem Nut Guide Cap Bearings Anti-friction Washers (2) Wedge/Rubber Encapsulated Bonnet Bonnet Gasket Body
304 Stainless Steel Ductile Iron 304 Stainless Steel Nitrile Ductile Iron 304 Stainless Steel Nitrile Bronze Bronze Acetal Acetal Ductile Iron** Ductile Iron Nitrile Ductile Iron
ASTM F593 (bolt)/ASTM F594 (nut) ASTM A536 ▼ ASTM F593 (bolt)/ASTM F594 (nut) ASTM D2000 ASTM A536 ▼ ASTM F593 ASTM D2000 ASTM B138 ASTM B584 ASTM A536 ▼ ASTM A536 ▼ ASTM D2000 ASTM A536 ▼
DIMENSIONS Dimension* A R FF E UU (bolt circle for FL) Q (bore) OO (bolt circle for MJ) N L B (number and size of holes for FL) O (bolt circle diameter for MJ) Turns to opem Weight (lbs.)*
4" 14.19 9.00 9.50 12.00 7.50 4.30 7.50 9.12 2.50 8--.75" 4--.88" 14 120
6" 18.00 11.00 11.06 12.00 9.50 6.30 9.50 11.12 2.50 8--.88" 6--.88" 20.5 172
Size 8" 21.50 13.50 12.09 12.00 11.75 8.30 11.75 13.37 2.50 8--.88" 6--.88" 26.5 264
10" 25.50 16.00 13.94 12.00 14.25 10.30 14.00 15.62 2.50 12--1.00" 8--.88" 33 397
12" 28.62 19.00 14.50 12.00 17.00 12.30 16.25 17.88 2.50 12--1.00" 8--.88" 38.5 522
See page B-1-22 for ordering instructions. + MJ accessories are included and palletized separately from valves. *All dimensions are in inches. All weights are in approximate pounds. **Fully encapsulated in molded rubber with no iron exposed. ▼ Material strength ASTM A536 65-45-12 minimum *** Per ANSI/AWWA C111, working pressure above 250psi requires the use of a special gasket rated for the higher pressure.
E
O
B
R
OO N
PROJECT INFORMATION
Q
UU
L
FF
APPROVAL STAMP
Contractor:
q Approved q Approved as noted q Not approved
Engineer:
Remarks:
Project: Address:
Submittal Date: Notes 1: Notes 2: MUELLER UL/FM - 8.15
Shaded area indicates change
N.R.S. Resilient Wedge Gate Valves
q P-2361-16 (with M.J. Accessories+) q P-2361-19 (less M.J. Accessories)
FLANGED X MECHANICAL JOINT ENDS Indicator Post Style Stuffing box 2" Square Operating Nut
• 4", 6", 8", 10" and 12" sizes • Meets or exceeds all applicable requirements of UL 262 and FM 1120/1130 specifications and certified to ANSI/NSF 61 & 372. • Ductile iron body with Mueller® PRO-GARD® fusion epoxy coated interior and exterior surfaces • Non-rising bronze stem • Rubber encapsulated iron wedge
Options
• Stainless steel fasteners: Type 316 • ASTM B98-C66100/H02 stem
• 350psig (2400 kPa/24 barg) maximum working pressure, 700psig (4800 kPa/48 barg) static test • Triple O-ring seal stuffing box (2 upper & 1 lower O-rings) • Epoxy coating meets or exceeds ANSI/AWWA C550. • Flanged end drilling complies with ANSI B16.42 Class 150***
• Stainless steel stem: Type 304 and Type 316 • EPDM disc and o-rings
PARTS LIST
Catalog Part Number G-16 G-27 G-41 G-49 G-152 G-200 G-201 G-203 G-205 G-206 G-208 G-209 G-210 G-211 G-212
Description
Material
Material Standard
Bonnet Bolts & Nuts Wrench Nut Stuffing Box Bolts and Nuts Stem O-rings (3) Stuffing Box Wrench Nut Cap Screw Stuffing Box Seal Stem Stem Nut Guide Cap Bearings Anti-friction Washers (2) Wedge/Rubber Encapsulated Bonnet Bonnet Gasket Body
304 Stainless Steel Ductile Iron 304 Stainless Steel Nitrile Ductile Iron 304 Stainless Steel Nitrile Bronze Bronze Acetal Acetal Ductile Iron** Ductile Iron Nitrile Ductile Iron
ASTM F593 (bolt)/ASTM F594 (nut) ASTM A536 ▼ ASTM F593 (bolt)/ASTM F594 (nut) ASTM D2000 ASTM A536 ▼ ASTM F593 ASTM D2000 ASTM B138 ASTM B584 ASTM A536 ▼ ASTM A536 ▼ ASTM D2000 ASTM A536 ▼
DIMENSIONS Dimension* A R FF E UU (bolt circle for FL) Q (bore) OO (bolt circle for MJ) N L B (number and size of holes for FL) O (bolt circle diameter for MJ) Turns to opem Weight (lbs.)*
4" 14.19 9.00 9.50 12.00 7.50 4.30 7.50 9.12 2.50 8--.75" 4--.88" 14 120
6" 18.00 11.00 11.06 12.00 9.50 6.30 9.50 11.12 2.50 8--.88" 6--.88" 20.5 172
Size 8" 21.50 13.50 12.09 12.00 11.75 8.30 11.75 13.37 2.50 8--.88" 6--.88" 26.5 264
10" 25.50 16.00 13.94 12.00 14.25 10.30 14.00 15.62 2.50 12--1.00" 8--.88" 33 397
12" 28.62 19.00 14.50 12.00 17.00 12.30 16.25 17.88 2.50 12--1.00" 8--.88" 38.5 522
See page B-1-22 for ordering instructions. + MJ accessories are included and palletized separately from valves. *All dimensions are in inches. All weights are in approximate pounds. **Fully encapsulated in molded rubber with no iron exposed. ▼ Material strength ASTM A536 65-45-12 minimum *** Per ANSI/AWWA C111, working pressure above 250psi requires the use of a special gasket rated for the higher pressure.
E
O
B
R
OO N
PROJECT INFORMATION
Q
UU
L
FF
APPROVAL STAMP
Contractor:
q Approved q Approved as noted q Not approved
Engineer:
Remarks:
Project: Address:
Submittal Date: Notes 1: Notes 2: MUELLER UL/FM - 8.15
Shaded area indicates change
