MYERS® ME7 Series - Myers Pumps
EFFLUENT PUMPS
MYERS ME7 Series ®
Cast Iron Submersible Effluent Pumps
SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS Applications
Effluent and Wastewater Removal, Sump Drainage, Dewatering, Flood Control
Capacities
110 GPM
416 LPM
Shut-off head
58’
17.7 m
Operation: Tethered: On Off Solids handling
18” 9” 3/4”
459.7 mm 231.1 mm 19 mm
Intermittent liquid temp
130°F
54.4°C
Motor
1/2 HP, 3450 RPM, 115 Volt or 230 Volt, single-phase, 60 Hz. Oil-filled. Built-in thermal overload protection with automatic reset and permanent split capacitor.
Acceptable pH range
6-9
Shaft seal
Type 6A or equal, Buna-N elastomers, silicon carbide sealing faces, stainless steel metal parts
Motor housing
Cast Iron
Volute case
Cast iron
Impeller
Cast iron Vortex
Power cord
20’ oil and water resistant 16-3 SJTW-A/SJTW with integrally grounded three-prong plug.
Discharge, NPT
2”
3 YEAR WARRANTY
FEATURES • Bearing and Mechanical Seal – Permanently lubricated for long life. • Overload Protection – Built-in thermal overload with automatic reset. • Cord Design – Prevents oil loss from and moisture protection for motor. • Serviceability – Heavyduty lift-out ring, field serviceable. • Solids Handling – 3/4” spherical capability.
• Stainless Steel Hardware – Allows for easy disassembly after extended service. • Controls – Standard controls available for automatic operation. • Float – Mechanical (non mercury).
ORDERING INFORMATION Catalog Number ME750120M ME750120T ME750220M
HP
1/2
Maximum Mechanical Phase/ Cord Load Volts Switch Cycles Length Amps Type 13.0 13.0 6.4
115 115 230
1/60
20’
Manual Tethered Manual
Switch Setting On
Off
– – 18.1” 9.1” – –
In order to provide the best products possible, s pecifications are subject to change.
EFFLUENT PUMPS
MYERS ME7 Series ®
Cast Iron Submersible Effluent Pumps PUMP PERFORMANCE 0
100
ME
CAPACITY LITERS PER MINUTE 150
200
250
300
350
400
450
18
75
01
50
20
-1
/2
16
HP
14 40
12 10
30
8 20
6
TOTAL HEAD IN METERS
TOTAL HEAD IN FEET
60
50
12.00
4 10
T AT I RO
2
0
20
40
60
80
100
CAPACITY GALLONS PER MINUTE
8.62
0
120
2" NPT 6.09
OUTLINE DIMENSIONS
12.00
T AT I RO
8.62
13.58
2" NPT 6.09
3.69 .94
Dimensions (in inches) are for estimating purposes only.
USA 293 WRIGHT STREET, DELAVAN, WI 53115 WWW.FEMYERS.COM PH: 888-987-8677 ORDERS FAX: 800-426-9446
CANADA
490 PINEBUSH ROAD, UNIT 4, CAMBRIDGE, ONTARIO, N1T 0A5 13.58 PH: 800-363-7867 FAX: 888-606-5484
Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. M3953SSE (06/18/15)
© 2015 Pentair Ltd. All Rights Reserved.
3.69 .94
MYERS ME7 Series ®
Cast Iron Submersible Effluent Pumps
SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS Applications
Effluent and Wastewater Removal, Sump Drainage, Dewatering, Flood Control
Capacities
110 GPM
416 LPM
Shut-off head
58’
17.7 m
Operation: Tethered: On Off Solids handling
18” 9” 3/4”
459.7 mm 231.1 mm 19 mm
Intermittent liquid temp
130°F
54.4°C
Motor
1/2 HP, 3450 RPM, 115 Volt or 230 Volt, single-phase, 60 Hz. Oil-filled. Built-in thermal overload protection with automatic reset and permanent split capacitor.
Acceptable pH range
6-9
Shaft seal
Type 6A or equal, Buna-N elastomers, silicon carbide sealing faces, stainless steel metal parts
Motor housing
Cast Iron
Volute case
Cast iron
Impeller
Cast iron Vortex
Power cord
20’ oil and water resistant 16-3 SJTW-A/SJTW with integrally grounded three-prong plug.
Discharge, NPT
2”
3 YEAR WARRANTY
FEATURES • Bearing and Mechanical Seal – Permanently lubricated for long life. • Overload Protection – Built-in thermal overload with automatic reset. • Cord Design – Prevents oil loss from and moisture protection for motor. • Serviceability – Heavyduty lift-out ring, field serviceable. • Solids Handling – 3/4” spherical capability.
• Stainless Steel Hardware – Allows for easy disassembly after extended service. • Controls – Standard controls available for automatic operation. • Float – Mechanical (non mercury).
ORDERING INFORMATION Catalog Number ME750120M ME750120T ME750220M
HP
1/2
Maximum Mechanical Phase/ Cord Load Volts Switch Cycles Length Amps Type 13.0 13.0 6.4
115 115 230
1/60
20’
Manual Tethered Manual
Switch Setting On
Off
– – 18.1” 9.1” – –
In order to provide the best products possible, s pecifications are subject to change.
EFFLUENT PUMPS
MYERS ME7 Series ®
Cast Iron Submersible Effluent Pumps PUMP PERFORMANCE 0
100
ME
CAPACITY LITERS PER MINUTE 150
200
250
300
350
400
450
18
75
01
50
20
-1
/2
16
HP
14 40
12 10
30
8 20
6
TOTAL HEAD IN METERS
TOTAL HEAD IN FEET
60
50
12.00
4 10
T AT I RO
2
0
20
40
60
80
100
CAPACITY GALLONS PER MINUTE
8.62
0
120
2" NPT 6.09
OUTLINE DIMENSIONS
12.00
T AT I RO
8.62
13.58
2" NPT 6.09
3.69 .94
Dimensions (in inches) are for estimating purposes only.
USA 293 WRIGHT STREET, DELAVAN, WI 53115 WWW.FEMYERS.COM PH: 888-987-8677 ORDERS FAX: 800-426-9446
CANADA
490 PINEBUSH ROAD, UNIT 4, CAMBRIDGE, ONTARIO, N1T 0A5 13.58 PH: 800-363-7867 FAX: 888-606-5484
Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. M3953SSE (06/18/15)
© 2015 Pentair Ltd. All Rights Reserved.
3.69 .94
