NAL-255 Mini Touch Dimmer - Nora Lighting
Type Project Catalog No. Lamp/Wattage
NAL-255 Mini Touch Dimmer Source: 24V 0.16W Stand By Power Dimensions
BRIGHTNESS CHART
actual size
Release sensor at desired brightness level. Touch sensor to turn off.
0.53"
Brightness Level
1.97"
0.75"
Width: 0.75" Length: 1.97" Height: 0.53"
Sensor cycles from low to high brightness when engaged.
PRODUCT DESCRIPTION
Touch sensor to turn on. Sensor displays at previously selected brightness level until changed or power is disconnected.
Sensor Control
The LED Lightbar mini touch dimmer mounts on the low voltage side of supply and can be attached to the Nora NULB Series Lightbar(s) or mounted remotely. Tap to turn on/off and hold to dim.
Features
• Mini Touch Dimmer allows Nora Lightbar run to dimmed from the voltage side • Brightness Memory allows the brightness to be stored until adapter plug is disconnected • Can be mounted directly to Lightbar or remotely • Includes mounting hardwire and power line interconnector • Available in Aluminum or Bronze • Compatible with NULB Lightbar and Lightbar PLUS
Included with every Mini Touch Dimmer: (1) Mini Touch Dimmer, (1) Special 11-3/4" Power Line Interconnector, (1) Flat Mounting Clip [NAL-201], (1) Bar to Bar Joiner [NAL-225], and (2) End to End Connectors [NAL-200]. Installation Mini Touch Dimmer includes a special 11-3/4" power line interconnector that MUST be used in order for the mini touch dimmer to work. Mini touch dimmer may be installed anywhere along the Lightbar run, as long as the LED Driver is fed into included special power line interconnector. Sample layouts (below) are a few examples where the mini touch dimmer may be placed. When attaching mini touch dimmer directly to Lightbar with end to end connector, bar to bar joiner (included) must be used for rigidty. Capabilities Dimmer is used to turn on/off a Lightbar run (Note: If the system using the Mini Touch Dimmer is connected to a wall switch, the switch can only shut system off), the system requires a manual touch to come on. Continue to hold a finger on the sensor area, it will dim the lightbar’s brightness in a cycling pattern. Remove your finger when it reaches the desired brightness (See Brightness Chart). The previous selected brightness is stored until the adapter plug is disconnected or when power has been interrupted.
SAMPLE LAYOUTS Dimmer Standard Lightbar Interconnection Cable
LED Lightbar
End to End Connector (Included)
LED Lightbar
Power Line Interconnector (Included)
Nora Driver
LED Lightbar
Power Line Interconnector (Included)
Nora Driver
Power Line Interconnector (Included)
Nora Driver
Dimmer LED Lightbar
Standard Lightbar Interconnection Cable
Standard Lightbar Interconnection Cable
Dimmer LED Lightbar
End to End Connector (Included)
LED Lightbar
Standard Lightbar Interconnection Cable
Mini Touch Dimmer NAL-255A: Mini Touch Dimmer, Aluminum NAL-255BZ: Mini Touch Dimmer, Bronze
6505 Gayhart St., Commerce, CA 90040 www.noralighting.com • Specifications subject to change without notice. © 2012 Phone: 800.686.6672 • FAX: 800.500.9955 • e-mail: [email protected]
Page 1 of 1
NAL-255 Mini Touch Dimmer Source: 24V 0.16W Stand By Power Dimensions
BRIGHTNESS CHART
actual size
Release sensor at desired brightness level. Touch sensor to turn off.
0.53"
Brightness Level
1.97"
0.75"
Width: 0.75" Length: 1.97" Height: 0.53"
Sensor cycles from low to high brightness when engaged.
PRODUCT DESCRIPTION
Touch sensor to turn on. Sensor displays at previously selected brightness level until changed or power is disconnected.
Sensor Control
The LED Lightbar mini touch dimmer mounts on the low voltage side of supply and can be attached to the Nora NULB Series Lightbar(s) or mounted remotely. Tap to turn on/off and hold to dim.
Features
• Mini Touch Dimmer allows Nora Lightbar run to dimmed from the voltage side • Brightness Memory allows the brightness to be stored until adapter plug is disconnected • Can be mounted directly to Lightbar or remotely • Includes mounting hardwire and power line interconnector • Available in Aluminum or Bronze • Compatible with NULB Lightbar and Lightbar PLUS
Included with every Mini Touch Dimmer: (1) Mini Touch Dimmer, (1) Special 11-3/4" Power Line Interconnector, (1) Flat Mounting Clip [NAL-201], (1) Bar to Bar Joiner [NAL-225], and (2) End to End Connectors [NAL-200]. Installation Mini Touch Dimmer includes a special 11-3/4" power line interconnector that MUST be used in order for the mini touch dimmer to work. Mini touch dimmer may be installed anywhere along the Lightbar run, as long as the LED Driver is fed into included special power line interconnector. Sample layouts (below) are a few examples where the mini touch dimmer may be placed. When attaching mini touch dimmer directly to Lightbar with end to end connector, bar to bar joiner (included) must be used for rigidty. Capabilities Dimmer is used to turn on/off a Lightbar run (Note: If the system using the Mini Touch Dimmer is connected to a wall switch, the switch can only shut system off), the system requires a manual touch to come on. Continue to hold a finger on the sensor area, it will dim the lightbar’s brightness in a cycling pattern. Remove your finger when it reaches the desired brightness (See Brightness Chart). The previous selected brightness is stored until the adapter plug is disconnected or when power has been interrupted.
SAMPLE LAYOUTS Dimmer Standard Lightbar Interconnection Cable
LED Lightbar
End to End Connector (Included)
LED Lightbar
Power Line Interconnector (Included)
Nora Driver
LED Lightbar
Power Line Interconnector (Included)
Nora Driver
Power Line Interconnector (Included)
Nora Driver
Dimmer LED Lightbar
Standard Lightbar Interconnection Cable
Standard Lightbar Interconnection Cable
Dimmer LED Lightbar
End to End Connector (Included)
LED Lightbar
Standard Lightbar Interconnection Cable
Mini Touch Dimmer NAL-255A: Mini Touch Dimmer, Aluminum NAL-255BZ: Mini Touch Dimmer, Bronze
6505 Gayhart St., Commerce, CA 90040 www.noralighting.com • Specifications subject to change without notice. © 2012 Phone: 800.686.6672 • FAX: 800.500.9955 • e-mail: [email protected]
Page 1 of 1
