Nerf Vortex Vigilon Slide Replacement
Nerf Vortex Vigilon Slide Replacement
Nerf Vortex Vigilon Slide Replacement If your slide wears out or cracks, you may need to replace it. This guide will show you the correct way to remove and replace your current slide.
Written By: Cara Pew
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 3
Nerf Vortex Vigilon Slide Replacement
INTRODUCTION In two steps, this guide will show you how to remove the slide pieces with a screwdriver so that they can be replaced.
TOOLS: Phillips #00 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 3
Nerf Vortex Vigilon Slide Replacement
Step 1 — Removing the slide screws
The two slide pieces hold the orange sight in place. Expect that the sight will come off when you remove the slide pieces.
Using a screwdriver, carefully unscrew the three #00 1 cm Phillips screws holding the two slide pieces together.
Both sides of the slide will come off when the screws are removed.
Step 2 — Removing the slide pieces
Lift both slide pieces off of the gun.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-19 08:20:37 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 3
Nerf Vortex Vigilon Slide Replacement If your slide wears out or cracks, you may need to replace it. This guide will show you the correct way to remove and replace your current slide.
Written By: Cara Pew
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 3
Nerf Vortex Vigilon Slide Replacement
INTRODUCTION In two steps, this guide will show you how to remove the slide pieces with a screwdriver so that they can be replaced.
TOOLS: Phillips #00 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 3
Nerf Vortex Vigilon Slide Replacement
Step 1 — Removing the slide screws
The two slide pieces hold the orange sight in place. Expect that the sight will come off when you remove the slide pieces.
Using a screwdriver, carefully unscrew the three #00 1 cm Phillips screws holding the two slide pieces together.
Both sides of the slide will come off when the screws are removed.
Step 2 — Removing the slide pieces
Lift both slide pieces off of the gun.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-19 08:20:37 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 3
