NEW QS
MYQ-See DDNS Setup for QS458, QS494, QS4816, QS558 1. STEP 1: On your computer go to the website http://myq-see.com. Enter the information required to create your MYQ-SEE Domain Name account. The information needed is your email address, a password, your name, etc. as seen on the image below. Click Submit button when done.
2. You will then see the image below. This is where you create the domain name you will use to login to your cameras with on your computer and mobile device, ex. mycameras.myq-see.com. Click “Request Domain” button to save your domain name. Congratulations, you have successfully created your own myq-see domain name.
Make sure to write down your email address (aka. user name), password and domain name you created on myq-see.com because you will enter and save this information into your DVR. Proceed below on how to do this.
3. Now you will save your email address (aka user name), password and domain name into your DVR. Right click on the mouse and click on “START”
4. Click on “ADVANCE”
5. Then click COMM Set the DDNS drop down box to “Enable” and then save your myq-see domain name into the Host Name box, ex. mycameras.myq-see.com. The user name will be the email address you setup in your myq-see account, and the password is the password you setup on your myq-see account. Click on Apply. Then click Test button. It should test with Success. Click exit when done.
2. You will then see the image below. This is where you create the domain name you will use to login to your cameras with on your computer and mobile device, ex. mycameras.myq-see.com. Click “Request Domain” button to save your domain name. Congratulations, you have successfully created your own myq-see domain name.
Make sure to write down your email address (aka. user name), password and domain name you created on myq-see.com because you will enter and save this information into your DVR. Proceed below on how to do this.
3. Now you will save your email address (aka user name), password and domain name into your DVR. Right click on the mouse and click on “START”
4. Click on “ADVANCE”
5. Then click COMM Set the DDNS drop down box to “Enable” and then save your myq-see domain name into the Host Name box, ex. mycameras.myq-see.com. The user name will be the email address you setup in your myq-see account, and the password is the password you setup on your myq-see account. Click on Apply. Then click Test button. It should test with Success. Click exit when done.
