NHIC-527QAT 5" IC Air-Tight Shallow Line Voltage ... - Nora Lighting
Source: 50W Max. (Varies with trim)
Type Project Catalog No. Lamp/Wattage
PRODUCT DESCRIPTION
Dimensions
NHIC-527QAT 5" IC Air-Tight Shallow Line Voltage Housing New construction housing for use in shallow plenum, insulated ceilings and can be in direct contact with thermal insulation. Air-tight construction provides energy savings by reducing the flow of air through the ceiling.
Features
5-7/8"
• Low 5-1/2" profile for shallow ceiling plenums • Rated for direct contact with insulation • Socket clips to trim for instant vertical lamp alignment • Reduces air loss for energy efficiency • Bar hangers with 90º repositioning ability • cULus listed for damp location and through branch circuit wiring • 24-1/2" Bar hangers with captive nails and alignment foot • Accommodates 1-3/8" maximum ceiling thickness
CONSTRUCTION Plaster Frame
High quality 0.040 steel die cut one piece frame. Bar hanger brackets on all four sides provide two possible positions for installations.
7"
5-5/8" Ceiling Cut-Out
10-1/2"
Cut-out: 5-5/8" ID: 5"
Housing Length: 10-1/2" Housing Width: 7" Housing Height: 5-7/8"
Housing 0.040 steel housing with riveted cap adjusts to maximum ceiling thickness of 1-3/8". Constructed as spot welded cylindrical wrap capped with a riveted dome. Air Flow Restriction Housing has factory installed gaskets to restrict airflow from room into ceiling plenum to
Type Project Catalog No. Lamp/Wattage
PRODUCT DESCRIPTION
Dimensions
NHIC-527QAT 5" IC Air-Tight Shallow Line Voltage Housing New construction housing for use in shallow plenum, insulated ceilings and can be in direct contact with thermal insulation. Air-tight construction provides energy savings by reducing the flow of air through the ceiling.
Features
5-7/8"
• Low 5-1/2" profile for shallow ceiling plenums • Rated for direct contact with insulation • Socket clips to trim for instant vertical lamp alignment • Reduces air loss for energy efficiency • Bar hangers with 90º repositioning ability • cULus listed for damp location and through branch circuit wiring • 24-1/2" Bar hangers with captive nails and alignment foot • Accommodates 1-3/8" maximum ceiling thickness
CONSTRUCTION Plaster Frame
High quality 0.040 steel die cut one piece frame. Bar hanger brackets on all four sides provide two possible positions for installations.
7"
5-5/8" Ceiling Cut-Out
10-1/2"
Cut-out: 5-5/8" ID: 5"
Housing Length: 10-1/2" Housing Width: 7" Housing Height: 5-7/8"
Housing 0.040 steel housing with riveted cap adjusts to maximum ceiling thickness of 1-3/8". Constructed as spot welded cylindrical wrap capped with a riveted dome. Air Flow Restriction Housing has factory installed gaskets to restrict airflow from room into ceiling plenum to
