Nikon D40 Lens Mount Replacement

Report 4 Downloads 167 Views
Nikon D40 Lens Mount Replacement

Nikon D40 Lens Mount Replacement A simple procedure to replace the lens mount.

Written By: Joe Leija

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 3

Nikon D40 Lens Mount Replacement

INTRODUCTION Your lens mount may become unusable due to wear and tear. A simple replacement can make attaching a lens to your camera easy again.

TOOLS: Phillips #0 Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 3

Nikon D40 Lens Mount Replacement

Step 1 — Lens Mount 

Remove the six 5.0 mm Philips #0 screws that go through the lens mount.



Once all 6 screws are removed, the lens mount can be gently removed from the camera.

Step 2

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-25 03:32:56 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 3