Nikon D90 Bottom Casing Replacement
Nikon D90 Bottom Casing Replacement
Nikon D90 Bottom Casing Replacement Replacing the bottom casing of the Nikon D90.
撰写者: Matthew Grota
© iFixit — CC BY-NC-SA
zh.iFixit.com
1 / 4 页
Nikon D90 Bottom Casing Replacement
介绍 The bottom casing of the Nikon D90 can sometimes be scuffed up and damaged. This guide shows how to replace the bottom casing of the Nikon D90. Be forewarned, the screws can be easily be stripped so be careful.
工具: Phillips #00 Screwdriver (1) iFixit Opening Tools (1)
© iFixit — CC BY-NC-SA
zh.iFixit.com
2 / 4 页
Nikon D90 Bottom Casing Replacement
步骤 1 — Bottom Casing
Turn the camera so the bottom casing is facing up.
步骤 2 — Removing Screws from the Bottom Casing
Next, use a PH00 screwdriver to remove the screws from the bottom casing.
Remove the four 5.3 mm Phillips screws.
Remove the three other 6.3 mm Phillips screws.
Be careful not to strip the screws. © iFixit — CC BY-NC-SA
zh.iFixit.com
3 / 4 页
Nikon D90 Bottom Casing Replacement
步骤 3 — Removing the Bottom Case
Next, use a plastic opening tool and carefully pop off the bottom case.
Then, lift and remove the bottom case.
To reassemble your device, follow these instructions in reverse order. 此文档最后生成于 2017-10-06 07:14:02 PM。
© iFixit — CC BY-NC-SA
zh.iFixit.com
4 / 4 页
Nikon D90 Bottom Casing Replacement Replacing the bottom casing of the Nikon D90.
撰写者: Matthew Grota
© iFixit — CC BY-NC-SA
zh.iFixit.com
1 / 4 页
Nikon D90 Bottom Casing Replacement
介绍 The bottom casing of the Nikon D90 can sometimes be scuffed up and damaged. This guide shows how to replace the bottom casing of the Nikon D90. Be forewarned, the screws can be easily be stripped so be careful.
工具: Phillips #00 Screwdriver (1) iFixit Opening Tools (1)
© iFixit — CC BY-NC-SA
zh.iFixit.com
2 / 4 页
Nikon D90 Bottom Casing Replacement
步骤 1 — Bottom Casing
Turn the camera so the bottom casing is facing up.
步骤 2 — Removing Screws from the Bottom Casing
Next, use a PH00 screwdriver to remove the screws from the bottom casing.
Remove the four 5.3 mm Phillips screws.
Remove the three other 6.3 mm Phillips screws.
Be careful not to strip the screws. © iFixit — CC BY-NC-SA
zh.iFixit.com
3 / 4 页
Nikon D90 Bottom Casing Replacement
步骤 3 — Removing the Bottom Case
Next, use a plastic opening tool and carefully pop off the bottom case.
Then, lift and remove the bottom case.
To reassemble your device, follow these instructions in reverse order. 此文档最后生成于 2017-10-06 07:14:02 PM。
© iFixit — CC BY-NC-SA
zh.iFixit.com
4 / 4 页
