nissan 2016 titan xd 2.2 steering stabilizer
921873680
NISSAN 2016 TITAN XD 2.2 STEERING STABILIZER Thank you for choosing Rough Country for your suspension needs.
Rough Country recommends a certified technician installs this system. In addition to these instructions, professional knowledge of disassemble/reassembly procedures as well as post installation checks must be known. Attempts to install this system without this knowledge and expertise may jeopardize the integrity and/or operating safety of the vehicle. Please read all the instructions before beginning the installation. Check the kit hardware against the parts list. Be sure you have all the needed parts and understand where they go. Also please review the tools needed list and make sure you have needed tools.
KIT CONTENTS: 1-Stabilizer Cylinder 1—Kit Bag Containing 1—12mm x 55mm Bolt 1—12mm x 65mm Bolt 1—½” Washer 2—12mm Flanged Locknuts
TOOLS NEEDED: 12mm Socket 18mm Wrench 19mm Wrench
TORQUE SPECS: ⅜” 30 ft/lbs - 35 ft/lbs ½” 65 ft/lbs - 75 ft/lbs
PASSENGER SIDE STABILIZER INSTALLATION INSTRUCTIONS FOR DUAL UNIT 1. 2. 3. 4. 5. 6.
Jack up the front of the truck and support with jack stands. Using a 12mm socket, remove the skid plate. Use the supplied 12mm x 55mm bolt and nut to secure the stabilizer to the frame side of the truck. See Photo 1. Secure the stabilizer to the steering with the 12mm x 65mm bolt, washer and nut. See Photo 2. Tighten using 18mm and 19mm wrenches. Install the skid plate using the factory hardware.
PHOTO 1
PHOTO 2
POST INSTALLATION 1. Check all fasteners for proper torque. Check to ensure there is adequate clearance between all rotating, mobile, fixed and heated members. Check steering for interference and proper working order. 2. Re torque all fasteners after 500 miles. Visually inspect components and re torque fasteners during routine vehicle service.
By purchasing any item sold by Rough Country, LLC, the buyer expressly warrants that he/she is in compliance with all applicable , State, and Local laws and regulations regarding the purchase, ownership, and use of the item. It shall be the buyers responsibility to comply with all Federal, State and Local laws governing the sales of any items listed, illustrated or sold. The buyer expressly agrees to indemnify and hold harmless Rough Country, LLC for all claims resulting directly or indirectly from the purchase, ownership, or use of the items.
NISSAN 2016 TITAN XD 2.2 STEERING STABILIZER Thank you for choosing Rough Country for your suspension needs.
Rough Country recommends a certified technician installs this system. In addition to these instructions, professional knowledge of disassemble/reassembly procedures as well as post installation checks must be known. Attempts to install this system without this knowledge and expertise may jeopardize the integrity and/or operating safety of the vehicle. Please read all the instructions before beginning the installation. Check the kit hardware against the parts list. Be sure you have all the needed parts and understand where they go. Also please review the tools needed list and make sure you have needed tools.
KIT CONTENTS: 1-Stabilizer Cylinder 1—Kit Bag Containing 1—12mm x 55mm Bolt 1—12mm x 65mm Bolt 1—½” Washer 2—12mm Flanged Locknuts
TOOLS NEEDED: 12mm Socket 18mm Wrench 19mm Wrench
TORQUE SPECS: ⅜” 30 ft/lbs - 35 ft/lbs ½” 65 ft/lbs - 75 ft/lbs
PASSENGER SIDE STABILIZER INSTALLATION INSTRUCTIONS FOR DUAL UNIT 1. 2. 3. 4. 5. 6.
Jack up the front of the truck and support with jack stands. Using a 12mm socket, remove the skid plate. Use the supplied 12mm x 55mm bolt and nut to secure the stabilizer to the frame side of the truck. See Photo 1. Secure the stabilizer to the steering with the 12mm x 65mm bolt, washer and nut. See Photo 2. Tighten using 18mm and 19mm wrenches. Install the skid plate using the factory hardware.
PHOTO 1
PHOTO 2
POST INSTALLATION 1. Check all fasteners for proper torque. Check to ensure there is adequate clearance between all rotating, mobile, fixed and heated members. Check steering for interference and proper working order. 2. Re torque all fasteners after 500 miles. Visually inspect components and re torque fasteners during routine vehicle service.
By purchasing any item sold by Rough Country, LLC, the buyer expressly warrants that he/she is in compliance with all applicable , State, and Local laws and regulations regarding the purchase, ownership, and use of the item. It shall be the buyers responsibility to comply with all Federal, State and Local laws governing the sales of any items listed, illustrated or sold. The buyer expressly agrees to indemnify and hold harmless Rough Country, LLC for all claims resulting directly or indirectly from the purchase, ownership, or use of the items.
