Nokia 3120 Liquid Crystal Display (LCD) Replacement
Nokia 3120 Liquid Crystal Display (LCD) Replacement
Nokia 3120 Liquid Crystal Display (LCD) Replacement This guide shows how to install a new LCD to replace a damaged screen.
Written By: Pierre Tong
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 6
Nokia 3120 Liquid Crystal Display (LCD) Replacement
INTRODUCTION The LCD is difficult to get to and the guide requires a moderate amount of work. Tiny parts require patience during disassembly.
TOOLS: T8 Torx Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 6
Nokia 3120 Liquid Crystal Display (LCD) Replacement
Step 1 — Battery Installation
Remove the back cover plate of the phone. To do this press down the lock as you slide the cover toward the bottom of the phone.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Once the back cover plate is removed, the battery should be exposed. Remove the battery by prying it out. This can be done with your finger-nail or a prying tool.
Page 3 of 6
Nokia 3120 Liquid Crystal Display (LCD) Replacement
Step 3 — Face Plate
Using your fingernails or another tool, pry the front face plate out along its edges and corners.
Step 4 — Liquid Crystal Display (LCD)
© iFixit — CC BY-NC-SA
www.iFixit.com
Once the cover plate has been removed, the keypad should easily pop out.
Page 4 of 6
Nokia 3120 Liquid Crystal Display (LCD) Replacement
Step 5
Using a screwdriver, remove the 6, 7 mm Torx-head screws on the front of the phone.
Step 6
© iFixit — CC BY-NC-SA
www.iFixit.com
Once the screws have been removed, the front plate of the phone should be removed, exposing the inside electronic components of the phone.
Page 5 of 6
Nokia 3120 Liquid Crystal Display (LCD) Replacement
Step 7
Take out the cell phone electronic board
The LCD screen can now be removed from the body of the phone.
Step 8
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-09-17 12:40:40 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 6
Nokia 3120 Liquid Crystal Display (LCD) Replacement This guide shows how to install a new LCD to replace a damaged screen.
Written By: Pierre Tong
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 6
Nokia 3120 Liquid Crystal Display (LCD) Replacement
INTRODUCTION The LCD is difficult to get to and the guide requires a moderate amount of work. Tiny parts require patience during disassembly.
TOOLS: T8 Torx Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 6
Nokia 3120 Liquid Crystal Display (LCD) Replacement
Step 1 — Battery Installation
Remove the back cover plate of the phone. To do this press down the lock as you slide the cover toward the bottom of the phone.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Once the back cover plate is removed, the battery should be exposed. Remove the battery by prying it out. This can be done with your finger-nail or a prying tool.
Page 3 of 6
Nokia 3120 Liquid Crystal Display (LCD) Replacement
Step 3 — Face Plate
Using your fingernails or another tool, pry the front face plate out along its edges and corners.
Step 4 — Liquid Crystal Display (LCD)
© iFixit — CC BY-NC-SA
www.iFixit.com
Once the cover plate has been removed, the keypad should easily pop out.
Page 4 of 6
Nokia 3120 Liquid Crystal Display (LCD) Replacement
Step 5
Using a screwdriver, remove the 6, 7 mm Torx-head screws on the front of the phone.
Step 6
© iFixit — CC BY-NC-SA
www.iFixit.com
Once the screws have been removed, the front plate of the phone should be removed, exposing the inside electronic components of the phone.
Page 5 of 6
Nokia 3120 Liquid Crystal Display (LCD) Replacement
Step 7
Take out the cell phone electronic board
The LCD screen can now be removed from the body of the phone.
Step 8
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-09-17 12:40:40 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 6
