non-metered commercial dryers - Whirlpool Commercial Laundry
NON-METERED COMMERCIAL DRYERS Featuring Mechanical Controls FOR YOUR CUSTOMERS • Large Capacity is Ideal for Family-Size Loads • Increased Capacity Allows Large Loads to Tumble and Spread, Reducing Dry Time • 3 Cycle Options: Heavy Duty, Normal and Delicates • 180°-Wide-Opening Side-Swing Door Allows for Convenient Access • Ergonomic Control Knobs SINGLE OPERATING THERMOSTAT For simple accurate temperature control.
CEM2793BQ—27" Electric Dryer CGM2793BQ—27" Gas Dryer • 7.4-Cu.-Ft. Drum Capacity • Ergonomic Control Knobs • 3 Cycles: Heavy Duty, Normal, Delicates • 180°-Wide-Opening Reversible Side-Swing Door • Powdered Paint Top and Lid, Rustproof Stainless Steel Torx® Screws For Increased Security • Galvanized Heavy-Gauge Cabinet Back, Side and Front Panel
• Ball Bearing Idler Pulley • 1/3 HP Motor • Power Cord Sold Separately (Electric Model Only) • Commercial Grade Blower Wheel • 90-Day Labor/2-Year Limited Parts Only Warranty*
*Call 1-800-662-3587 for warranty details.
NON-METERED COMMERCIAL DRYERS
Whirlpool® Commercial Wash ENERGY STAR® RATED HIGH-EFFICIENCY FRONT-LOAD WASHER
COMMERCIAL WASHER SPECIFICATIONS
Whirlpool® Front-Load Washer MICROPROCESSOR CONTROLS
WASHER SPECIFICATIONS MODEL MOTOR Variable-speed, reversible, thermoprotected, high-efficiency controlled induction Wash – HP (kWh) Extract – HP (kWh) Average kilowatt hour per cycle APPROXIMATE WATER USAGE – gallons (liters) Average hot water usage, hot cycle Average hot water usage, warm cycle Average total water usage per cycle DRYER SPECIFICATIONS ELECTRICAL RATING MODELS CEM2793BQ Domestic model – voltage BREAKER/FUSE REQUIREMENTS GENERAL INFORMATION Domestic amps Modern design and look with metal console and CYLINDER ergonomic control knobs. Volume – cu. ft. (liters) DRUM VOLUME 7.4 Cu. Ft. Diameter – in. (mm) MOTOR Single-Speed Motor with Built-In Depth1/3 – in.HP(mm) Overload Protector DOOR OPENING ELECTRICAL REQUIREMENTS 3-Wire Nominal 240/208 Volt, 60 Hz, A.C. In. (mm) Standard, WASH SPEED 30-Amp Breaker/Fuse Circuit per Dryer (Subject to Local Codes) RPM Electric HEATER TYPE EXTRACT SPEED Maximum rpmHeater Rated at 5600 Watts HEATER/BURNER RATING Maximum g-force OPERATIONAL AMPERAGE Motor—4.0 AMPS, No Load OPERATING PRESSURE Heater—23.33 AMPS @ 240 Volt—27.33 Total Psi (bar) SHIPPING WEIGHT (EST.) 152 lb. crated, 138 lb. uncrated INLET HOSE DIMENSIONS Ft. (m) Cabinet Width—in. (mm) 27 (686) DRAIN HOSE Ft. (m) Cabinet Depth—in. (mm) 29.25 (743) ADJUSTABLE LEVELING LEGS Cabinet Height—in. (mm) at Top of Metercase 40.8 (1036) APPROXIMATE WEIGHT *Burner orifices are available for manufactured, natural, mixed and LP gas with Crated varying — BTUlbs. ratings. (kg) Uncrated — lbs. (kg) DIMENSIONS Width — in. (mm) Dimensions are for planning purposes only. For complete information, Depth — in. (mm) see installation instructions packed with product. Height — in. (mm)
Featuring Mechanical Controls
Whirlpool® Non-Metered Commercial Dryers Mechanical Controls
CHW9900WQ
.09 (.07) .54 (.40) 0.07 3.32 (12.6)** 1.87 (7.08)** 13.3 (50.3)** 120V/60Hz
CGM2793BQ
15 3.1 (87.8) 7.4 Cu. Ft. 21.6 (547) 1/313.4 HP (341) Single-Speed Motor with Built-In
Overload Protector
Volt, 60 Hz, A.C. Standard, Dimensions are for planning purposes only. 14.2120 (361) 15-Amp Breaker/Fuse Circuit per SeeDryer Whirlpool® Installation Instructions for full details. 31-40(Subject to Local Codes)
Gas*
80022,000 BTU Natural Gas 214
Motor—4.0 AMPS, No Load
20-100 (1-8)
152 lb. crated, 138 lb. uncrated
4 (1.22)
27 (686) 6 (1.83) •
29.25 (743) 40.8 (1036)
254 (115) 245 (111) 27 (685.8)
Exhaust29Information (736.6) All dryers 44.80 require (1137.92)*the equivalent of a 4-inch diameter exhaust * Height at metercase top does not include pedestal. duct. Rigid metal duct is recommended. Failure to properly **Average based on J1 testing with factory installed preset cycles. dryer willtheresult in improper operation. See specific instructions for proper installation. Because of continuous productexhaust improvement,the Whirlpool reserves right to change specifications without notice.
Pedestal Single Box Kit #WHP0400VW Pedestal Pack of 10 Kit #WHP0401VW
3 YEARS LIMITED PARTS ONLY WARRANTY # of 90° turns
4" Hood
For a period from the date of original purchase through the time listed above, the designated partsof that in Maximum length 4"fail diameter rigid normal commercial use will be repaired or replaced free of charge for the part itself, with0 the owner paying all 64 Ft. other costs, including labor, transportation and customs 1 from all warranty 54 Ft. duty. Chemical damage is excluded coverage. See complete warranty for details.
2 1⁄2" Hood metal duct 58 Ft. 48 Ft.
2
44 Ft.
38 Ft.
3
35 Ft.
29 Ft.
4
27 Ft.
21 Ft.
To Locate a Distributor Near You, Please Visit www.whirlpoolcommerciallaundry.com/distributor, or call 1-800-NO-BELTS
Maximum length of 4" diameter flexible metal duct
®Registered trademark/™Trademark of Whirlpool, U.S.A. ©2009 Whirlpool Corporation. All rights reserved. 0 3649022 Ft. U.S.A. 28 Ft. Whirlpool Corporation • Benton Harbor, Michigan
1
31 Ft.
23 Ft.
2
27 Ft.
19 Ft.
3
25 Ft.
17 Ft.
4
23 Ft.
15 Ft.
To Locate a Distributor Near You, Please Visit www.whirlpoolcommerciallaundry.com/distributor, or call 1-800-662-3587. TORX is a registered Trademark of Textron Industries, Inc. ®/™ © 2013 Whirlpool. All rights reserved. Whirlpool Corporation • Benton Harbor, Michigan 49022 U.S.A.
WY13010 4/13
WL100014
CEM2793BQ—27" Electric Dryer CGM2793BQ—27" Gas Dryer • 7.4-Cu.-Ft. Drum Capacity • Ergonomic Control Knobs • 3 Cycles: Heavy Duty, Normal, Delicates • 180°-Wide-Opening Reversible Side-Swing Door • Powdered Paint Top and Lid, Rustproof Stainless Steel Torx® Screws For Increased Security • Galvanized Heavy-Gauge Cabinet Back, Side and Front Panel
• Ball Bearing Idler Pulley • 1/3 HP Motor • Power Cord Sold Separately (Electric Model Only) • Commercial Grade Blower Wheel • 90-Day Labor/2-Year Limited Parts Only Warranty*
*Call 1-800-662-3587 for warranty details.
NON-METERED COMMERCIAL DRYERS
Whirlpool® Commercial Wash ENERGY STAR® RATED HIGH-EFFICIENCY FRONT-LOAD WASHER
COMMERCIAL WASHER SPECIFICATIONS
Whirlpool® Front-Load Washer MICROPROCESSOR CONTROLS
WASHER SPECIFICATIONS MODEL MOTOR Variable-speed, reversible, thermoprotected, high-efficiency controlled induction Wash – HP (kWh) Extract – HP (kWh) Average kilowatt hour per cycle APPROXIMATE WATER USAGE – gallons (liters) Average hot water usage, hot cycle Average hot water usage, warm cycle Average total water usage per cycle DRYER SPECIFICATIONS ELECTRICAL RATING MODELS CEM2793BQ Domestic model – voltage BREAKER/FUSE REQUIREMENTS GENERAL INFORMATION Domestic amps Modern design and look with metal console and CYLINDER ergonomic control knobs. Volume – cu. ft. (liters) DRUM VOLUME 7.4 Cu. Ft. Diameter – in. (mm) MOTOR Single-Speed Motor with Built-In Depth1/3 – in.HP(mm) Overload Protector DOOR OPENING ELECTRICAL REQUIREMENTS 3-Wire Nominal 240/208 Volt, 60 Hz, A.C. In. (mm) Standard, WASH SPEED 30-Amp Breaker/Fuse Circuit per Dryer (Subject to Local Codes) RPM Electric HEATER TYPE EXTRACT SPEED Maximum rpmHeater Rated at 5600 Watts HEATER/BURNER RATING Maximum g-force OPERATIONAL AMPERAGE Motor—4.0 AMPS, No Load OPERATING PRESSURE Heater—23.33 AMPS @ 240 Volt—27.33 Total Psi (bar) SHIPPING WEIGHT (EST.) 152 lb. crated, 138 lb. uncrated INLET HOSE DIMENSIONS Ft. (m) Cabinet Width—in. (mm) 27 (686) DRAIN HOSE Ft. (m) Cabinet Depth—in. (mm) 29.25 (743) ADJUSTABLE LEVELING LEGS Cabinet Height—in. (mm) at Top of Metercase 40.8 (1036) APPROXIMATE WEIGHT *Burner orifices are available for manufactured, natural, mixed and LP gas with Crated varying — BTUlbs. ratings. (kg) Uncrated — lbs. (kg) DIMENSIONS Width — in. (mm) Dimensions are for planning purposes only. For complete information, Depth — in. (mm) see installation instructions packed with product. Height — in. (mm)
Featuring Mechanical Controls
Whirlpool® Non-Metered Commercial Dryers Mechanical Controls
CHW9900WQ
.09 (.07) .54 (.40) 0.07 3.32 (12.6)** 1.87 (7.08)** 13.3 (50.3)** 120V/60Hz
CGM2793BQ
15 3.1 (87.8) 7.4 Cu. Ft. 21.6 (547) 1/313.4 HP (341) Single-Speed Motor with Built-In
Overload Protector
Volt, 60 Hz, A.C. Standard, Dimensions are for planning purposes only. 14.2120 (361) 15-Amp Breaker/Fuse Circuit per SeeDryer Whirlpool® Installation Instructions for full details. 31-40(Subject to Local Codes)
Gas*
80022,000 BTU Natural Gas 214
Motor—4.0 AMPS, No Load
20-100 (1-8)
152 lb. crated, 138 lb. uncrated
4 (1.22)
27 (686) 6 (1.83) •
29.25 (743) 40.8 (1036)
254 (115) 245 (111) 27 (685.8)
Exhaust29Information (736.6) All dryers 44.80 require (1137.92)*the equivalent of a 4-inch diameter exhaust * Height at metercase top does not include pedestal. duct. Rigid metal duct is recommended. Failure to properly **Average based on J1 testing with factory installed preset cycles. dryer willtheresult in improper operation. See specific instructions for proper installation. Because of continuous productexhaust improvement,the Whirlpool reserves right to change specifications without notice.
Pedestal Single Box Kit #WHP0400VW Pedestal Pack of 10 Kit #WHP0401VW
3 YEARS LIMITED PARTS ONLY WARRANTY # of 90° turns
4" Hood
For a period from the date of original purchase through the time listed above, the designated partsof that in Maximum length 4"fail diameter rigid normal commercial use will be repaired or replaced free of charge for the part itself, with0 the owner paying all 64 Ft. other costs, including labor, transportation and customs 1 from all warranty 54 Ft. duty. Chemical damage is excluded coverage. See complete warranty for details.
2 1⁄2" Hood metal duct 58 Ft. 48 Ft.
2
44 Ft.
38 Ft.
3
35 Ft.
29 Ft.
4
27 Ft.
21 Ft.
To Locate a Distributor Near You, Please Visit www.whirlpoolcommerciallaundry.com/distributor, or call 1-800-NO-BELTS
Maximum length of 4" diameter flexible metal duct
®Registered trademark/™Trademark of Whirlpool, U.S.A. ©2009 Whirlpool Corporation. All rights reserved. 0 3649022 Ft. U.S.A. 28 Ft. Whirlpool Corporation • Benton Harbor, Michigan
1
31 Ft.
23 Ft.
2
27 Ft.
19 Ft.
3
25 Ft.
17 Ft.
4
23 Ft.
15 Ft.
To Locate a Distributor Near You, Please Visit www.whirlpoolcommerciallaundry.com/distributor, or call 1-800-662-3587. TORX is a registered Trademark of Textron Industries, Inc. ®/™ © 2013 Whirlpool. All rights reserved. Whirlpool Corporation • Benton Harbor, Michigan 49022 U.S.A.
WY13010 4/13
WL100014
