Northfield Mount Hermon Early Childhood Education Center
Newberry Market Renovations Northfield Mount Hermon Early Childhood Education Center
05/20/16 7/16" ZIP Wall Sheathing REV. 1 06 10 00
_X Reviewed __ Revise and Resubmit _ Furnish as Corrected Corrections or comments made on the shop drawings during this review do not relieve contractor from compliance with requirements of the drawings and specifications. This check is only for review of the general conformance with the design concept of the project and general compliance with the information given in the contract documents. The contractor is responsible for: Confirming and correlating all quantities and dimensions; selecting fabrication processes and techniques of construction; coordinating his or her work with that of all other trades and performing all work in a safe and satisfactory manner. Date:_5/20/16____
By:_GS____
SELLERS TREYBAL STRUCTURAL ENGINEERS PC
SUBMITTAL
~aissance
IB~ilders
P.O. Box 272, Thrners Falls, MA 01376 413-863-8316, fax 413-863-9712
TO
Bread Loaf Corporation 1293 Route 7 South Middlebury VT 05753
Item
Submittal#: Submittal Date: Prepared By: PROJECT
24 05/18/2016 Stephen Greenwald
2016070 NMH Early Childhood Center One Lamplighter Way Gill MA 01354
Action Required
Description
For Your Record
1 7116 Zip Sheathing For Shear walls and Exterior wall Sheathing 2 ICC - EC Report 7116 Zip Sheathing
For Your Record
Notes
Please sign and date this form as proof that you are in receipt of the above listed items. Return form to Renaissance Builders Signed:
Date:
Date Required
.,..
••;:hg
Q.
'1&)-,
ZIP SYSTEM" SHEATHING MANUFACTURER Huber Engineered Woods lLC 10925 David Taylor Drive, Suite 300, Charlotte, NC 28262 800.933.9220 • Technical Service: 800.933.9220 x2716 ZIPSystem.com • HuberArchitectLibrarv.com BASIC USE AND APPLICATIONS ZIP System Roof and Wall sheathing panels are oriented strand board (OSB), wood structural panels with built-in protective overlays that eliminate the need for building wrap or roofing felt. Install the panels, tape the seams with Huber's ZIP System tape, and the building is rough dried-in. A wide range of roof coverings and waf! c1addings can be installed directly over ZIP System sheathing. When used on a wall, ZIP System sheathing functions as a combination wall sheathing, code.recognized water-resistive, and air barrier. The sheathing panel seams are sealed with ZIP System tape, protecting the wall from water intrusion.
Superior Moisture Resistance
Continuous vapor permeable moisture barrier that blocks out liquid water but still allows walls to dry out
Ease of Installation
No more delays because of felt or building wraps blowing off Code-recognized built in weather and air barrier
Energy Efficient When Huber's ZIP System sheathing is utilized for roof applications, felt underlayment is not required. In wall and roof coverings system requi ring multiple layers of wateHesistive barriers or underlayment, ZIP System is intended to replace on the first layer. ZIP System sheathing uses a tough, phenolic resign-impregnated overlay to provide permanent weather resistance, in contact with a proprietary seam tape that has been extensively tested for longterm adhesion and flexibility. This combination meets performance requirements for Grade D weather-resistive barriers in accordance with ICCAcceptance Criteria AC38. ZIP System sheathing may be used for roofs and walls in Type V construction, in Type III construction as roof sheathing only, and other construction permitted under the International Residential
roofs
with
underlayment
slopes
of
2:12
(16.67
percent)
or
greater.
Felt
is not required on the roof. In roof covering systems
requiring multiple layers of underlayment,
ZIP System sheathing is
Intended to replace only the first layer. In wall covering systems requiring
multiple
layers of water-resistive
barriers,
ZIP System
sheathing is intended to repiace only the first layer. ZIP System sheathing should not be used with adhesively-attached EIFS, but can be used with
mechanically
attached
EIFS. Avoid
exposing ZIP System sheathing for more than 180 days.
Code.
AVAII.ABLE SIZES ZIP System sheets with profile (SIB available in
LIMiTATIONS When used as roof sheathing, ZIP System sheathing is limited to
Roof and Wall sheathing panels are available in 4' x 8' self-spacing edge profiles and tongue and groove edge only). ZIP System panels are Exposure 1 rated and are the following span ratings and performance categories.
.24/16, Structural 1, 7/16 PERFCAT (tI' x 8, 9 and 10')* .32/16, Structural 1, 1i2 PERFCAT .40/20, Structural 1, 5/8 PERFCAT Longer length panels are available for wall applications. Third party independent testing for ZIP System Roof and Wall sheathing is conducted by Timbereo, Inc. (TECO).
;;
SUSTAINABLE DESiGN CONTRIBUTIONS o Low-Emitting Material: No added urea formaldehyde Sustainable Forestry Initiative Certified Wood: Harvested, transported, manufactured, and distributed utilizing sustainable practices Renewable Forest Resources: Composed of primarily young growth biD-based resources Regional Materials: Made in the United Sates at one of our 4 regional manufacturing facilities: Broken Bow, OK; Commerce, GA; Crystal Hill, VA; and Easton, ME
.". .;.,.
,
.~
.. "
fIi.i",,-tt~.--" .::n~,.(w,
i.. !. ,:
'.
."",
.
i.
POTENTIAL LEED CREDIT CONTRIBUTiONS Credit IEQ 4.4 low-Emitting Materials, Composite Wood and Agrifiber: AdvanTech contains nGl added urea formaldehyde Credit MR 5.1 or 5.2 Regional Materials: Materials harvested, processed, and manufactured within SODmiles of project site. Credit MR 2.2 Environmentally Preferable Products - local Production (LEEDfor Homes)
Huber Engineered Wood's ZIP System Roof and Wall sheathing panels are manufactured at multiple ioeations in the U,S. They are available through distributors nationwide. Visit ZIPSystem.com or contact Huber Engineered Woods for a retailer near you.
WARRANTY
SUBSTRATE
ZIP System Roof and Wall sheathing is furnished with a 30.year system warranty as well as a 30.year. warranty against manufacturing defects. Visit ZIPSystem.com for limitations and restrictions.
Before beginning installation, verify wood wall framing is properly spaced and aligned to continuously support panel edges.
NOTES AND LIMITATIONS
EA 3 Air Infiltration
- Meet air leakage requirements
P,~NEL INSTALLATION Install ZIP System sheathing
in accordance
with:
-ZIP System Sheathing Installation Manual .JCC.ES ESR-1473 .ICC-ES ESR-1474 • Requirements of authorities having jurisdiction
Do not use on roof with slopes less than 2:12 Do not install ZIP System tape in temperatures less than zaG F o Roof panels edge clips are only required with 7/16 Inch thick ZIP System sheathing on supports spaced greater than 16-inches oc, Panel edge clips approved to be used with ZIP System Sheathing are: Simpson Strong-Tie19, PSCA,PSCl and TamlynT'" pes models
eo
TeCHNICAL SERVICE When used as roof sheathing, install panels with moisture barrier surface facing out, with long edge perpendicular to framing members, and with short edges fully supported. Stagger short edge seams. Long edges are self-spacing; 4.foot panel edges should be spaced manually approximately 1/B-inch (3 mm) apart. When used as wall sheathing, install panels positioned with the water-resistive barrier facing out. The panels may be installed with the long side of the panel oriented either horizontally or vertically to the framing members. Walls that are designed to resist lateral shear forces and sheathed with wood structural panels typically require solid framing or blocking behind all panel edges. Long edges are selfspacing; 4-foot panel edges should be manually, spaced approximately lIB-in (3 mm) apart. Fasteners: Install fasteners approved by applicable bullding codes. Install fasteners 318.inch (9.5 mm) from panel edges. Space fasteners 6inches (152 mm) on centers on supported panel ends and 12-1nches (305 mm) on center at intermediate supports unless otherwise specified. ZIP System panels have a printed fastening guide for 16inch (406 mm) and 24-inch (610 mm) on center fasteners locations. Tape Installation: Install ZIP System tape in accordance with manufacturer's written instructions as seams, openings, and penetrations. Install windows and window flashing in accordance with window manufactureris written instructions. Details of installation recommendations are available in AutoCAD and PDF formats at ZIPSystem.com or HuberArchitectUbra ry .com.
STORAGE AND HANDLING Store and handle products according to manufacturer's written recommendations. Support panel bundles off the ground. Cover stored panels with weatherproof protective material; allow sides of protective material to remain loose to ensure adequate air circulation. In high-moisture conditions, cut bundle banding to prevent edge damage to panels. Factory applied packaging is intended only for protection during transit.
AVA ILABILITY
Detalled information including specifications, product literature, test reports, installation instructions, and special applications is available through Huber Engineered Woods. Please visit ZIPSystem.com or call 800.933.9220 EXT2716 to speak to a technical representative.
AVAILABLE RESOURCES Section 061613 SHEATHING guide specifications ZIP System Roof and Wall Sheathing products in CSI 3-part format is available in MasterSpec~, ARCAT.com, BSD SpecLinkG, at ZIPSystem.com, and Huber ArchitectLibrary .com.
Exposure Durability Classification
DOC PS 2
Exposure 1
Panel Grade
DOC PS 2
Structural 1*
Moisture Barrier
AC38
Grade D WRB
Water Penetration
ASTM E331
Passed
Vapor Transmission
ASTM E96-8 (paneloverlavl
12-16 perms
Air Barrier Assembly
ASTM E2357
0.037 L/(s*m2)
Air Barrier Material
ASTM E2178
0.0016 L/Is'm2i
Wind Driven Rain
TAS 100 (at 100mph)
Passed
@300 P,
2015 Huber EngineeredWoods llC. AdvanTech" is a registeredtrademark of Huber EngineeredWoods llC. Huber is a registration trademark of J.M. Huber Co~poration.HUB-90D602/16
@
*-Note:4' ~g' 7/16" ZIPSystem"Structural 1" panelsare not availablein all areasof the country. Pleasecheckwith your local supplier for availability In your area.
DIVISION:
0600
DO-WOOD,
PLASTICS AND COMPOSITES
SECTION: 06 16 DO-SHEATHING DIVISION:
07 00 DO-THERMAL
SECTION: 07 2S OO-WATER-RESISTIVE
AND MOISTURE
PROTECTION
BARRIERS/WEATHER
SECTION: 07 27 DO-AIR
BARRIERS
BARRIERS
REPORT HOLDER:
HUBER ENGINEERED WOODS, LLC ONE RESOURCE SQUARE 1092S DAVID TAYLOR DRIVE, SUITE 300 CHARLonE,
NORTH CAROLINA 28262
EVALUATION
SUBJECT:
ZIP SYSTEM@WALL SHEATHING
ICC ~ ~
ICC ~
ICC ~
Fs,@, Fsj c PMG ~. LISTED
look for the trusted marks of Conformity! "2014 Recipient of Prestigious Western Stotes Seismic Policy Council (WSSPC)Aword in Excellence" ICC-ES Evaluation Reports are not to be construed as representing aesthetics or any other attributes not specifically addressed, nor are they to be construed as an endorsement of the subject of the report or a recommendation for its use. There is no warranty by ICC Evaluation Service, LLC, express or implied, as to any finding or other malter in this report, or as to any product covered by the report. Copyright @ 2015
ES ICC EVALUATION ,-=,. SERVICE
.
Most Widely Accepted and Trusted
ICC-ES Evaluation Report
ESR-1474* Reissued October 2014 This report is subject to renewal October 2016.
www.icc-es.org
I
I
(800) 423-6587
(562) 699-0543
DIVISION: 06 00 DO-WOOD, PLASTICS AND COMPOSITES Section: 06 16 DO-Sheathing
A Subsidiary of the International Code Counci~ 3.0 DESCRIPTION 3.1 Sheathing
DIVISION: 07 00 DO-THERMAL AND MOISTURE PROTECTION Section: 07 25 OO-Water-resistive BarrierslWeather Barriers
Section: 07 27 OD-Air Barriers REPORT HOLDER:
Panel:
The ZIP System4tl Wall Sheathing panel is an aSB wood structural panel having a laminated exterior facer. The Exposure 1 OSS complies with US DOC PS 2 for wood structural panels. The exterior facer is a medium-density, phenolic-impregnated, polymer-modified sheet material qualifying as a Grade D water-resistive barrier (required by Section 2510.6 of the 2012 and 2009 IBG). The panels are nominally 4 feet wide by 8,9, 10, 11 or 12 feet long and have a square-finished-edge or machined-edge profile.
HUBER ENGINEERED WOODS, LLC ONE RESOURCE SQUARE 10925 DAVID TAYLOR DRIVE, SUITE 300 CHARLOnE, NORTH CAROLINA 28262 (800) 933.9220 www.huberwood.com
When tested in accordance with ASTM E96 (water method), the polymer-modified sheet overlay has a minimum vapor permeance of 12 perms [68.6 X 10-11 kg/(Pa-s-m2)]. Equivalent Water Vapor Transmission rate (WVT) of the polymer-modified sheet overlay is 83.4 g/(24h-m') when tested at 73.4'F (23'G).
EVALUATION SUBJECT:
The water-resistive barrier and air barrier properties of the ZIP System4tl Wall Sheathing Panels are not affected when the panels are manufactured to comply as facing materials for SIPs in accordance with Section R610.3.2 and Table R610.3.2 of the 2015 IRG (Section R613.3.2 and Table R613.3.2 of the 2012 and 2009IRG).
ZIP SYSTEM" WALL SHEATHING 1.0 EVALUATION SCOPE Compliance with the following codes: .2015,2012
3.2 Seam Tape:
and 2009 InternationalBuilding Code'"(IBC)
• 2015, 2012 and 2009 International Residential Code'" (IRC) • 2015,2012 and 2009/nternational Code'" (IECG)
Energy Conservation
The ZIP System™ seam tape is a self-adhering membrane tape consisting of acrylic adhesive laminated to a polyolefin backing. The ta~e is 0.012 inch (0.30 mm) thick with a minimum width of 3/4 inches (95.2 mm), and comes in rolls of various Il;ngths. 4.0
Properties evaluated:
INSTALLATION
4.1 General:
• Weather resistance • Air leakage 2.0 USES ZIP System'" Wall Sheathing panels are used as combination wall sheathing, air barrier, and water-resistive illl barrier. This report recognizes the use of ZIP System Sheathing, when installed with ZIP System™ flexible flashing seam tape, in walls of Type V construction (IBC) and dwellings under the IRe, and as an alternate to the water-resistive barrier required in Chapter 14 of the IBC and Chapter 7 of the IRC, and to the air barrier required by Sections R402.4 and G402.5.1 of the 2015 IEGG (Sections R402.4 and G402.4.1 of the 2012 IEGG; Sections 402.4.1 and 502.4.3 of the 2009 IEGG).
Installation of ZIP Systemfll Wall Sheathing panels must comply with the applicable code, this report and the manufacturer's published installation instructions. The manufacturer's published installation instructions must be available at the jobsite during installation. 4.2 Application: 4.2.1 General: The ZIP System'" Wall Sheathing panels must be attached to wall framing in accordance with the applicable code for wood structural panels, and in compliance with their panel span rating. The panels must be installed with the polymer-modified sheet overlay facing the exterior. In accordance with the manufacturer's published installation instructions, it is recommended that the square edges of the panels be installed with a gap
*Revlsed August 2015 lCC-ES Evalualion Reports are nOllO be conslrued as representing aeslhelics or any olher allribules 1101 specifically addressed, nor are they to be construed as an elldorseml!nt oflhe subjecl of the report or a recommendation for ilS use. There Is no worranly by ICC EI'a/ualion Serl'ice, LLC, express or implied, as 10 any finding or olher mat/er in Ihis report, or OJ /0 any produci covered hy Ihe report. Copyright 0 2015
Page 1 of6
ESR-1474
I
Most Widely Accepted and Trusted
between adjacent panels and between panels and dissimilar materials. All ZIP System~ Wall Sheathinil panel seams must be sufficiently sealed with ZIP System seam tape. All overlay surfaces must be dry and free of sawdust and dirt prior to application of the ZIP System seam tape. The ZIP System™ seam tape must extend a minimum of 1 inch (25.4 mm) past the panel edge T-joint intersections and must be centered within 1/2 inch (12.7 mm) over the middle of panel seams. The tape must be pressed firmly to adhere to the surfaces and seal the seams. Wrinkles in the ZIP SystemTh'l seam tape are acceptable unless they create a leak path to the panel seam. 1M
4.2.2 Flashing: Flashing complying with the applicable code must be installed at the perimeter of door and window assemblies, penetrations and terminations of exterior wall assemblies. exterior wall intersections with roofs. chimneys, porches, decks, balconies, and similar projections, and at built-in gutters and similar locations where moisture could enter the wall. An adhesive-backed flashing tape recognized in a current ICC-ES evaluation fll report must be installed to seal all ZIP System Wall Sheathing flashing joints. Penetration items must be sealed to the panels. The adhesive-backed flashing tape must comply with the ICC-ES Acceptance Criteria for Flexible Flashing Materials (AC148) and must be installed in accordance with the manufacturer's published installation instructions. See Figures 1 through 7 of this report for typical flashing, water-resistive barrier and air barrier assembly installation details. 4.2.3 Air Barrier Assembly: ZIP System~ Wall Sheathing fastened to maximum 24-inch-on-center (610 mm), wood wall framing, using minimum 6d nails spaced at 6 inches (152 mm) around panel edges and at 12 inches (305 mm) in the field, leaving a lIs-inch (3.18 mm) gap between panels, forms an air barrier assembly when the gaps between panels and the perimeter of penetrations are sealed with ZIP System™ seam tape as required by Section 4.2.1. The assembly has demonstrated a maximum air leakage of 0.0072 cfm/tr [0.037 LI(som')) infiltration and 0.0023 clmltt' [0.012 LI(som')) exfiltration at a pressure differential 01 1.57 psf (75 Pal when tested in accordance with ASTM E2357. 5.0
CONDITIONS OF USE
The ZIP Systemfll Wall Sheathing panel and tape system described in this report complies with, or is a suitable
Page 2 016 alternative to what is specified in, those codes listed in Section 1.0 of this report, subject to the following conditions: 5.1 This evaluation report and the manufacturer's published instailation instructions, when required by the code official, must be submitted at the time of permit application. 5.2 The ZIP Systemfll Wall Sheathing panels must be manufactured, identified and installed in accordance with this report and the manufacturer's published installation instructions. In the event of a conflict between the instructions and this report, this report must govern. 5.3 The ZIP Systemfll Wall Sheathing panels must be covered with a code-complying exterior wall covering, or one that is recognized in a current ICC-ES evaluation report. 5.4 The OSB sheathing must comply with US DOC PS-2. 5.5 6.0 6.1
Fire-resistance-rated scope of this report.
construction
is
outside
the
EVIDENCE SUBMITIED Data in accordance with the ICC-ES Acceptance Criteria for Water-resistive Membranes Factorybonded to Wood-based Structural Sheathing, Used as Water-resistive Barriers (AC310), dated May 2008 (editorially revised August 2015).
6.2 Air leakage data in accordance with ASTM E2357. 7.0
IDENTIFICATION
Each ZIP Systemfll Wall Sheathing panel described in this report must bear a label that includes the manufacturer's name (Huber Engineered Woods LLC), the product name, nominal panel thickness, the evaluation report number (ESR-1474), and the words "Mill 229, Crystal Hill, Virginia"; "Mill 228, Easton, Maine~; "Mill 227, Commerce, Georgia~; or -Mill 290, Broken Bow, Oklahoma." The OSB sheathing must also bear a label demonstrating compliance with US DOC PS 2 from an approved inspection agency. The ZIP System TM seam tape roll must be labeled with the ZIP System logo and the evaluation report number ESR-1474 (see Figure 8).
ESR-1474
I
Most Widely Accepted and Trusted
Page 3 016
,~.>
k~ .'~. ',/'. :))
05/20/16 7/16" ZIP Wall Sheathing REV. 1 06 10 00
_X Reviewed __ Revise and Resubmit _ Furnish as Corrected Corrections or comments made on the shop drawings during this review do not relieve contractor from compliance with requirements of the drawings and specifications. This check is only for review of the general conformance with the design concept of the project and general compliance with the information given in the contract documents. The contractor is responsible for: Confirming and correlating all quantities and dimensions; selecting fabrication processes and techniques of construction; coordinating his or her work with that of all other trades and performing all work in a safe and satisfactory manner. Date:_5/20/16____
By:_GS____
SELLERS TREYBAL STRUCTURAL ENGINEERS PC
SUBMITTAL
~aissance
IB~ilders
P.O. Box 272, Thrners Falls, MA 01376 413-863-8316, fax 413-863-9712
TO
Bread Loaf Corporation 1293 Route 7 South Middlebury VT 05753
Item
Submittal#: Submittal Date: Prepared By: PROJECT
24 05/18/2016 Stephen Greenwald
2016070 NMH Early Childhood Center One Lamplighter Way Gill MA 01354
Action Required
Description
For Your Record
1 7116 Zip Sheathing For Shear walls and Exterior wall Sheathing 2 ICC - EC Report 7116 Zip Sheathing
For Your Record
Notes
Please sign and date this form as proof that you are in receipt of the above listed items. Return form to Renaissance Builders Signed:
Date:
Date Required
.,..
••;:hg
Q.
'1&)-,
ZIP SYSTEM" SHEATHING MANUFACTURER Huber Engineered Woods lLC 10925 David Taylor Drive, Suite 300, Charlotte, NC 28262 800.933.9220 • Technical Service: 800.933.9220 x2716 ZIPSystem.com • HuberArchitectLibrarv.com BASIC USE AND APPLICATIONS ZIP System Roof and Wall sheathing panels are oriented strand board (OSB), wood structural panels with built-in protective overlays that eliminate the need for building wrap or roofing felt. Install the panels, tape the seams with Huber's ZIP System tape, and the building is rough dried-in. A wide range of roof coverings and waf! c1addings can be installed directly over ZIP System sheathing. When used on a wall, ZIP System sheathing functions as a combination wall sheathing, code.recognized water-resistive, and air barrier. The sheathing panel seams are sealed with ZIP System tape, protecting the wall from water intrusion.
Superior Moisture Resistance
Continuous vapor permeable moisture barrier that blocks out liquid water but still allows walls to dry out
Ease of Installation
No more delays because of felt or building wraps blowing off Code-recognized built in weather and air barrier
Energy Efficient When Huber's ZIP System sheathing is utilized for roof applications, felt underlayment is not required. In wall and roof coverings system requi ring multiple layers of wateHesistive barriers or underlayment, ZIP System is intended to replace on the first layer. ZIP System sheathing uses a tough, phenolic resign-impregnated overlay to provide permanent weather resistance, in contact with a proprietary seam tape that has been extensively tested for longterm adhesion and flexibility. This combination meets performance requirements for Grade D weather-resistive barriers in accordance with ICCAcceptance Criteria AC38. ZIP System sheathing may be used for roofs and walls in Type V construction, in Type III construction as roof sheathing only, and other construction permitted under the International Residential
roofs
with
underlayment
slopes
of
2:12
(16.67
percent)
or
greater.
Felt
is not required on the roof. In roof covering systems
requiring multiple layers of underlayment,
ZIP System sheathing is
Intended to replace only the first layer. In wall covering systems requiring
multiple
layers of water-resistive
barriers,
ZIP System
sheathing is intended to repiace only the first layer. ZIP System sheathing should not be used with adhesively-attached EIFS, but can be used with
mechanically
attached
EIFS. Avoid
exposing ZIP System sheathing for more than 180 days.
Code.
AVAII.ABLE SIZES ZIP System sheets with profile (SIB available in
LIMiTATIONS When used as roof sheathing, ZIP System sheathing is limited to
Roof and Wall sheathing panels are available in 4' x 8' self-spacing edge profiles and tongue and groove edge only). ZIP System panels are Exposure 1 rated and are the following span ratings and performance categories.
.24/16, Structural 1, 7/16 PERFCAT (tI' x 8, 9 and 10')* .32/16, Structural 1, 1i2 PERFCAT .40/20, Structural 1, 5/8 PERFCAT Longer length panels are available for wall applications. Third party independent testing for ZIP System Roof and Wall sheathing is conducted by Timbereo, Inc. (TECO).
;;
SUSTAINABLE DESiGN CONTRIBUTIONS o Low-Emitting Material: No added urea formaldehyde Sustainable Forestry Initiative Certified Wood: Harvested, transported, manufactured, and distributed utilizing sustainable practices Renewable Forest Resources: Composed of primarily young growth biD-based resources Regional Materials: Made in the United Sates at one of our 4 regional manufacturing facilities: Broken Bow, OK; Commerce, GA; Crystal Hill, VA; and Easton, ME
.". .;.,.
,
.~
.. "
fIi.i",,-tt~.--" .::n~,.(w,
i.. !. ,:
'.
."",
.
i.
POTENTIAL LEED CREDIT CONTRIBUTiONS Credit IEQ 4.4 low-Emitting Materials, Composite Wood and Agrifiber: AdvanTech contains nGl added urea formaldehyde Credit MR 5.1 or 5.2 Regional Materials: Materials harvested, processed, and manufactured within SODmiles of project site. Credit MR 2.2 Environmentally Preferable Products - local Production (LEEDfor Homes)
Huber Engineered Wood's ZIP System Roof and Wall sheathing panels are manufactured at multiple ioeations in the U,S. They are available through distributors nationwide. Visit ZIPSystem.com or contact Huber Engineered Woods for a retailer near you.
WARRANTY
SUBSTRATE
ZIP System Roof and Wall sheathing is furnished with a 30.year system warranty as well as a 30.year. warranty against manufacturing defects. Visit ZIPSystem.com for limitations and restrictions.
Before beginning installation, verify wood wall framing is properly spaced and aligned to continuously support panel edges.
NOTES AND LIMITATIONS
EA 3 Air Infiltration
- Meet air leakage requirements
P,~NEL INSTALLATION Install ZIP System sheathing
in accordance
with:
-ZIP System Sheathing Installation Manual .JCC.ES ESR-1473 .ICC-ES ESR-1474 • Requirements of authorities having jurisdiction
Do not use on roof with slopes less than 2:12 Do not install ZIP System tape in temperatures less than zaG F o Roof panels edge clips are only required with 7/16 Inch thick ZIP System sheathing on supports spaced greater than 16-inches oc, Panel edge clips approved to be used with ZIP System Sheathing are: Simpson Strong-Tie19, PSCA,PSCl and TamlynT'" pes models
eo
TeCHNICAL SERVICE When used as roof sheathing, install panels with moisture barrier surface facing out, with long edge perpendicular to framing members, and with short edges fully supported. Stagger short edge seams. Long edges are self-spacing; 4.foot panel edges should be spaced manually approximately 1/B-inch (3 mm) apart. When used as wall sheathing, install panels positioned with the water-resistive barrier facing out. The panels may be installed with the long side of the panel oriented either horizontally or vertically to the framing members. Walls that are designed to resist lateral shear forces and sheathed with wood structural panels typically require solid framing or blocking behind all panel edges. Long edges are selfspacing; 4-foot panel edges should be manually, spaced approximately lIB-in (3 mm) apart. Fasteners: Install fasteners approved by applicable bullding codes. Install fasteners 318.inch (9.5 mm) from panel edges. Space fasteners 6inches (152 mm) on centers on supported panel ends and 12-1nches (305 mm) on center at intermediate supports unless otherwise specified. ZIP System panels have a printed fastening guide for 16inch (406 mm) and 24-inch (610 mm) on center fasteners locations. Tape Installation: Install ZIP System tape in accordance with manufacturer's written instructions as seams, openings, and penetrations. Install windows and window flashing in accordance with window manufactureris written instructions. Details of installation recommendations are available in AutoCAD and PDF formats at ZIPSystem.com or HuberArchitectUbra ry .com.
STORAGE AND HANDLING Store and handle products according to manufacturer's written recommendations. Support panel bundles off the ground. Cover stored panels with weatherproof protective material; allow sides of protective material to remain loose to ensure adequate air circulation. In high-moisture conditions, cut bundle banding to prevent edge damage to panels. Factory applied packaging is intended only for protection during transit.
AVA ILABILITY
Detalled information including specifications, product literature, test reports, installation instructions, and special applications is available through Huber Engineered Woods. Please visit ZIPSystem.com or call 800.933.9220 EXT2716 to speak to a technical representative.
AVAILABLE RESOURCES Section 061613 SHEATHING guide specifications ZIP System Roof and Wall Sheathing products in CSI 3-part format is available in MasterSpec~, ARCAT.com, BSD SpecLinkG, at ZIPSystem.com, and Huber ArchitectLibrary .com.
Exposure Durability Classification
DOC PS 2
Exposure 1
Panel Grade
DOC PS 2
Structural 1*
Moisture Barrier
AC38
Grade D WRB
Water Penetration
ASTM E331
Passed
Vapor Transmission
ASTM E96-8 (paneloverlavl
12-16 perms
Air Barrier Assembly
ASTM E2357
0.037 L/(s*m2)
Air Barrier Material
ASTM E2178
0.0016 L/Is'm2i
Wind Driven Rain
TAS 100 (at 100mph)
Passed
@300 P,
2015 Huber EngineeredWoods llC. AdvanTech" is a registeredtrademark of Huber EngineeredWoods llC. Huber is a registration trademark of J.M. Huber Co~poration.HUB-90D602/16
@
*-Note:4' ~g' 7/16" ZIPSystem"Structural 1" panelsare not availablein all areasof the country. Pleasecheckwith your local supplier for availability In your area.
DIVISION:
0600
DO-WOOD,
PLASTICS AND COMPOSITES
SECTION: 06 16 DO-SHEATHING DIVISION:
07 00 DO-THERMAL
SECTION: 07 2S OO-WATER-RESISTIVE
AND MOISTURE
PROTECTION
BARRIERS/WEATHER
SECTION: 07 27 DO-AIR
BARRIERS
BARRIERS
REPORT HOLDER:
HUBER ENGINEERED WOODS, LLC ONE RESOURCE SQUARE 1092S DAVID TAYLOR DRIVE, SUITE 300 CHARLonE,
NORTH CAROLINA 28262
EVALUATION
SUBJECT:
ZIP SYSTEM@WALL SHEATHING
ICC ~ ~
ICC ~
ICC ~
Fs,@, Fsj c PMG ~. LISTED
look for the trusted marks of Conformity! "2014 Recipient of Prestigious Western Stotes Seismic Policy Council (WSSPC)Aword in Excellence" ICC-ES Evaluation Reports are not to be construed as representing aesthetics or any other attributes not specifically addressed, nor are they to be construed as an endorsement of the subject of the report or a recommendation for its use. There is no warranty by ICC Evaluation Service, LLC, express or implied, as to any finding or other malter in this report, or as to any product covered by the report. Copyright @ 2015
ES ICC EVALUATION ,-=,. SERVICE
.
Most Widely Accepted and Trusted
ICC-ES Evaluation Report
ESR-1474* Reissued October 2014 This report is subject to renewal October 2016.
www.icc-es.org
I
I
(800) 423-6587
(562) 699-0543
DIVISION: 06 00 DO-WOOD, PLASTICS AND COMPOSITES Section: 06 16 DO-Sheathing
A Subsidiary of the International Code Counci~ 3.0 DESCRIPTION 3.1 Sheathing
DIVISION: 07 00 DO-THERMAL AND MOISTURE PROTECTION Section: 07 25 OO-Water-resistive BarrierslWeather Barriers
Section: 07 27 OD-Air Barriers REPORT HOLDER:
Panel:
The ZIP System4tl Wall Sheathing panel is an aSB wood structural panel having a laminated exterior facer. The Exposure 1 OSS complies with US DOC PS 2 for wood structural panels. The exterior facer is a medium-density, phenolic-impregnated, polymer-modified sheet material qualifying as a Grade D water-resistive barrier (required by Section 2510.6 of the 2012 and 2009 IBG). The panels are nominally 4 feet wide by 8,9, 10, 11 or 12 feet long and have a square-finished-edge or machined-edge profile.
HUBER ENGINEERED WOODS, LLC ONE RESOURCE SQUARE 10925 DAVID TAYLOR DRIVE, SUITE 300 CHARLOnE, NORTH CAROLINA 28262 (800) 933.9220 www.huberwood.com
When tested in accordance with ASTM E96 (water method), the polymer-modified sheet overlay has a minimum vapor permeance of 12 perms [68.6 X 10-11 kg/(Pa-s-m2)]. Equivalent Water Vapor Transmission rate (WVT) of the polymer-modified sheet overlay is 83.4 g/(24h-m') when tested at 73.4'F (23'G).
EVALUATION SUBJECT:
The water-resistive barrier and air barrier properties of the ZIP System4tl Wall Sheathing Panels are not affected when the panels are manufactured to comply as facing materials for SIPs in accordance with Section R610.3.2 and Table R610.3.2 of the 2015 IRG (Section R613.3.2 and Table R613.3.2 of the 2012 and 2009IRG).
ZIP SYSTEM" WALL SHEATHING 1.0 EVALUATION SCOPE Compliance with the following codes: .2015,2012
3.2 Seam Tape:
and 2009 InternationalBuilding Code'"(IBC)
• 2015, 2012 and 2009 International Residential Code'" (IRC) • 2015,2012 and 2009/nternational Code'" (IECG)
Energy Conservation
The ZIP System™ seam tape is a self-adhering membrane tape consisting of acrylic adhesive laminated to a polyolefin backing. The ta~e is 0.012 inch (0.30 mm) thick with a minimum width of 3/4 inches (95.2 mm), and comes in rolls of various Il;ngths. 4.0
Properties evaluated:
INSTALLATION
4.1 General:
• Weather resistance • Air leakage 2.0 USES ZIP System'" Wall Sheathing panels are used as combination wall sheathing, air barrier, and water-resistive illl barrier. This report recognizes the use of ZIP System Sheathing, when installed with ZIP System™ flexible flashing seam tape, in walls of Type V construction (IBC) and dwellings under the IRe, and as an alternate to the water-resistive barrier required in Chapter 14 of the IBC and Chapter 7 of the IRC, and to the air barrier required by Sections R402.4 and G402.5.1 of the 2015 IEGG (Sections R402.4 and G402.4.1 of the 2012 IEGG; Sections 402.4.1 and 502.4.3 of the 2009 IEGG).
Installation of ZIP Systemfll Wall Sheathing panels must comply with the applicable code, this report and the manufacturer's published installation instructions. The manufacturer's published installation instructions must be available at the jobsite during installation. 4.2 Application: 4.2.1 General: The ZIP System'" Wall Sheathing panels must be attached to wall framing in accordance with the applicable code for wood structural panels, and in compliance with their panel span rating. The panels must be installed with the polymer-modified sheet overlay facing the exterior. In accordance with the manufacturer's published installation instructions, it is recommended that the square edges of the panels be installed with a gap
*Revlsed August 2015 lCC-ES Evalualion Reports are nOllO be conslrued as representing aeslhelics or any olher allribules 1101 specifically addressed, nor are they to be construed as an elldorseml!nt oflhe subjecl of the report or a recommendation for ilS use. There Is no worranly by ICC EI'a/ualion Serl'ice, LLC, express or implied, as 10 any finding or olher mat/er in Ihis report, or OJ /0 any produci covered hy Ihe report. Copyright 0 2015
Page 1 of6
ESR-1474
I
Most Widely Accepted and Trusted
between adjacent panels and between panels and dissimilar materials. All ZIP System~ Wall Sheathinil panel seams must be sufficiently sealed with ZIP System seam tape. All overlay surfaces must be dry and free of sawdust and dirt prior to application of the ZIP System seam tape. The ZIP System™ seam tape must extend a minimum of 1 inch (25.4 mm) past the panel edge T-joint intersections and must be centered within 1/2 inch (12.7 mm) over the middle of panel seams. The tape must be pressed firmly to adhere to the surfaces and seal the seams. Wrinkles in the ZIP SystemTh'l seam tape are acceptable unless they create a leak path to the panel seam. 1M
4.2.2 Flashing: Flashing complying with the applicable code must be installed at the perimeter of door and window assemblies, penetrations and terminations of exterior wall assemblies. exterior wall intersections with roofs. chimneys, porches, decks, balconies, and similar projections, and at built-in gutters and similar locations where moisture could enter the wall. An adhesive-backed flashing tape recognized in a current ICC-ES evaluation fll report must be installed to seal all ZIP System Wall Sheathing flashing joints. Penetration items must be sealed to the panels. The adhesive-backed flashing tape must comply with the ICC-ES Acceptance Criteria for Flexible Flashing Materials (AC148) and must be installed in accordance with the manufacturer's published installation instructions. See Figures 1 through 7 of this report for typical flashing, water-resistive barrier and air barrier assembly installation details. 4.2.3 Air Barrier Assembly: ZIP System~ Wall Sheathing fastened to maximum 24-inch-on-center (610 mm), wood wall framing, using minimum 6d nails spaced at 6 inches (152 mm) around panel edges and at 12 inches (305 mm) in the field, leaving a lIs-inch (3.18 mm) gap between panels, forms an air barrier assembly when the gaps between panels and the perimeter of penetrations are sealed with ZIP System™ seam tape as required by Section 4.2.1. The assembly has demonstrated a maximum air leakage of 0.0072 cfm/tr [0.037 LI(som')) infiltration and 0.0023 clmltt' [0.012 LI(som')) exfiltration at a pressure differential 01 1.57 psf (75 Pal when tested in accordance with ASTM E2357. 5.0
CONDITIONS OF USE
The ZIP Systemfll Wall Sheathing panel and tape system described in this report complies with, or is a suitable
Page 2 016 alternative to what is specified in, those codes listed in Section 1.0 of this report, subject to the following conditions: 5.1 This evaluation report and the manufacturer's published instailation instructions, when required by the code official, must be submitted at the time of permit application. 5.2 The ZIP Systemfll Wall Sheathing panels must be manufactured, identified and installed in accordance with this report and the manufacturer's published installation instructions. In the event of a conflict between the instructions and this report, this report must govern. 5.3 The ZIP Systemfll Wall Sheathing panels must be covered with a code-complying exterior wall covering, or one that is recognized in a current ICC-ES evaluation report. 5.4 The OSB sheathing must comply with US DOC PS-2. 5.5 6.0 6.1
Fire-resistance-rated scope of this report.
construction
is
outside
the
EVIDENCE SUBMITIED Data in accordance with the ICC-ES Acceptance Criteria for Water-resistive Membranes Factorybonded to Wood-based Structural Sheathing, Used as Water-resistive Barriers (AC310), dated May 2008 (editorially revised August 2015).
6.2 Air leakage data in accordance with ASTM E2357. 7.0
IDENTIFICATION
Each ZIP Systemfll Wall Sheathing panel described in this report must bear a label that includes the manufacturer's name (Huber Engineered Woods LLC), the product name, nominal panel thickness, the evaluation report number (ESR-1474), and the words "Mill 229, Crystal Hill, Virginia"; "Mill 228, Easton, Maine~; "Mill 227, Commerce, Georgia~; or -Mill 290, Broken Bow, Oklahoma." The OSB sheathing must also bear a label demonstrating compliance with US DOC PS 2 from an approved inspection agency. The ZIP System TM seam tape roll must be labeled with the ZIP System logo and the evaluation report number ESR-1474 (see Figure 8).
ESR-1474
I
Most Widely Accepted and Trusted
Page 3 016
,~.>
k~ .'~. ',/'. :))
