Oakland 3 Single Lamp
Low Pressure Sodium
OK3
Oakland 3 Single Lamp mount luminaire flush mounts to pole. Parallel wall mount includes 1” deep mounting bracket • Lamps and lamp support devices included; Enclosed sockets, with nickel-plated brass contacts for singleended, bayonet base LPS lamps • HR type ballast, HPF, starting rated at -20°F; Ballast components mounted on removable panel and provided with in-line disconnects • Durable Lektrocote® TGIC thermoset polyester powder coat paint finish assures long life and maintenancefree service • Listed to UL1598 for use in wet locations • IESNA full cut-off classified
lps luminaires
• Formed and welded aluminum housing with optional embossed decorative band and color vinyl trim stripe • Extruded aluminum door with clear, flat polycarbonate lens, fully gasketed to housing; Concealed hinge secures door to housing and two spring-loaded latches allow tool-free access to lamp • Specular, anodized aluminum reflectors provide Type IV or V light patterns. Type V reflector incorporates segmented side reflectors positioned parallel with lamp; Parallel mount luminaries available with Type IV only; Optical assembly secured with quarter-turn fasteners for access to ballast compartment • Extruded aluminum arm required for pole mount; Yoke mount has two square arms attaching housing to square slipfitter for 2.375” OD tenon; Parallel pole
LAMP INCLUDED
arm logic (order separately)
Ordering Information
OK3
series
F
series
ARM Rigid arm LENS
LAMP ORIENT./DISTR.
OK3 Oakland 3
F Flat -
H4 Horiz. IV (YT, PP & PW
(single lamp)
polycarbonate
mounting type)
H5 Horiz. V (square)
(A, YT mounting type)
mount
Q2 Quad-Tap 120/208/240/277V ®
included, order separately) YT Yoke mount (2 3/8” tenon) PP Parallel pole mount (sq. poles only) PW Parallel wall mount
F(X) Fusing (replace X with
voltage: 1-120, 2-208, 3-240, 4-277, 5-480, 6-347)
T2 Tri-Tap 120/277/347V (CSA) 5 480V
(replace X with voltage: 1-120, 2-208, 3-240, 4-277, 5-480, 6-347)
COLOR
low pressure sodium
DB Dark Bronze
L90 90w (T-21)
BL Black WH White
L13 135w (T-21) L18 180w (T-21)
EB Embossed band
GR Gray PS Platinum Silver RD Red
L90 L13 L18
A D C Arm Mount
Yoke Mount
Parallel P ole Mount
A B C 14 1/4” 24 1/2” 7 1/2” 362 mm 622 mm 191 mm 14 1/4” 34 1/2” 7 1/2” 362 mm 876 mm 191 mm 14 1/4” 48” 7 1/2” 362 mm 1219 mm 191 mm Note:
(EPA = 0.4 ft2, 5 lbs) (0.03 m2, 2.2 kg)
pole shape #1 drill pattern S Square R4 Round straight (4.5") R5 Round straight (5") R6 Round straight (6") #2 drill pattern T2 Round tapered (2.5") T3 Round tapered (3") T35 Round tapered (3.5") T4 Round tapered & COLOR Dark Bronze
Black White Gray Platinum Silver Red (premium color) Forest Green (premium color) CC Custom Color (consult factory)
see page 615 for accessories
103 10" Arm
DB BL WH GR PS RD FG
Lamp and support device included Factory wired to highest voltage unless specified Required for 90° configurations
B
(EPA = 0.24 ft2, 3.5 lbs) (0.02 m2, 1.5 kg)
straight (4")
(premium color) FG Forest Green (premium color) CC Custom Color (consult factory)
1 2 3
Arm Length 6 6" Arm
R(XX) Reveal (replace XX
with color designation); EB option must be chosen with reveal option
source/wattage1
S Square/ rectangular
PR(X) Photo cell receptacle
voltage
A Arm mount (arm not
luminaire shape
OPTIONS
D 26 3/4” 679 mm 26 3/4” 679 mm 26 3/4” 679 mm
EPA 1.4 ft² 0.1 m² 2.1 ft² 0.2 m² 3 ft² 0.3 m²
Weight 29 lbs. 13.1 kg 37 lbs. 16.8 kg 40 lbs. 18.1 kg
• EPA and weight values do not include mounting arm • Yoke mounting adds 3.5 ft2 EPA and approx. 11 lbs
609
Accessories l u m i n a i r e ac c e s s o r i e s
Medallion 1 & LPS Accessories ARM-CR-K-TA-XX1 2 3/8" OD tenon slipfitter for single fixture ARM-CR-TK-TA-XX1 2 3/8" OD tenon slipfitter for single fixture (180˚) ARM-CR-K-S-XX1 10" Adjustable arm for flat surfaces 5" rigid straight arm ARM-C-5-S-XX1 ARM-C-10-S-XX1 10" rigid straight arm ARM-CRD-6-S-XX1 6" rigid upswept arm Round pole adapter for straight and CRD-RPA2-xx1 upswept arm (2 3/4” to 3 1/8” dia. pole) Round pole adapter for straight and CRD-RPA3-xx1 upswept arm (3 1/4” to 3 3/4” dia. pole) Round pole adapter for straight and CRD-RPA4-xx1 upswept arm (3 7/8” to 4 1/2” dia. pole) Round pole adapter for straight and CRD-RPA5-xx1 upswept arm (5” dia. pole) Round pole adapter for straight and CRD-RPA6-xx1 upswept arm (6” dia. pole) Adjustable arm, direct mount AADM-XX1 Square pole tenon adapter (4 @ 90°) (2 sETA-xx1 3/8"-2 7/8" OD tenon) Round pole tenon adapter (4 @ 90°) rETA-xx1 (2 3/8"-2 7/8" OD tenon) (requires 4" round pole adapter) Hexagon pole tenon adapter (3 @ TETA-xx1 120°) (2 3/8"-2 7/8" OD tenon) Wall bracket WB-CR-XX1 Horizontal mast arm fitter for 2 3/8" OD MAf-CM-XX1 mast arm Twin parallel luminaire bracket TPLB-XX1 CM1 internal house-side shield 8914527 Polycarbonate vandal shield CR1-PVG External house-side (EPA = .57) shield CM1-EHS-XX1 (must use PCR (X) option) Photocontrol PTL-1 - Twistlock cell (120V) (must use PCR (X) option) Photocontrol PTL-8 - Twistlock cell (120, 208, 240, 277V) (must use PCR (X) option) Photocontrol PTL-5 - Twistlock cell (480V) (must use PCR (X) option) Photocontrol PTL-6 - Twistlock cell (347V) (must use PCR (X) option) Shorting cap PSC - Twistlock 1 Replace XX with color choice, eg: DB for Dark Bronze
Medallion II Accessories ARM-CR-K-TA-XX1 2 3/8" OD tenon slipfitter for single fixture ARM-CR-TK-TA-XX1 2 3/8" OD tenon slipfitter for single fixture (180˚) ARM-CR-K-S-XX1 10" Adjustable arm for flat surfaces External house-side shield cm2-ehs-xx1 Internal house-side shield cm2-ihs-hl (horizontal lamp units) Bracket for 2 3/8" OD horizontal maf-cm-xx1 mast arm Photocontrol - Twist-Lock® cell ptl-1 (120V) Photocontrol - Twist-Lock® cell ptl-8 (120-277V) Photocontrol - Twist-Lock® cell ptl-5 (480V) Photocontrol - Twist-Lock® cell ptl-6 (347V) Shorting cap - Twist-Lock® psc Polycarbonate vandal shield CM2-PVG 1 Replace XX with color choice, eg: DB for Dark Bronze
Msv m-pulsive Accessories msv-ihs-h3
Internal house-side shield (H3 distribution) Extreme glare shield for flat glass msv-fggs-2 units only (mounts to housing); restricts lighting to any one side of fixture; black finish standard Glare shield for sag glass units msv-gs only; restricts light to any one side of fixture, black finish standard Polycarbonate vandal guard msv-pvg Flush mount kit - direct mount FDMLH luminaire hardware kit Round pole adapter (2 3/4 - 3 1/8") f-RPA2-XX1,2 Round pole adapter (3 1/4 - 3 3/4") f-RPA3-XX1,2 Round pole adapter (3 7/8 - 4 1/2") f-RPA4-XX1,2 Round pole adapter (5") f-RPA5-XX1,2 Round pole adapter (6") f-RPA6-XX1,2 Wall bracket WB-CR-XX1 Photocontrol - Twist-Lock cell ptl-1 (120V) Photocontrol - Twist-Lock cell (120ptl-8 277V) Photocontrol - Twist-Lock cell ptl-5 (480V) Photocontrol - Twist-Lock cell ptl-6 (347V) Shorting Cap - Twist-Lock psc 4'' Arm arm-f-4-db arm-f-10-s-db 10'' Arm 1 Replace XX with color choice, eg.: DB for Dark Bronze 2 When ordering poles, specify Pole Drill Pattern #2
614
Monterey Accessories WB-R-xx1 8914529 8914528 8914548
Wall bracket; 6" arm included MY1 flat glass internal house-side shield MY2 flat glass internal house-side shield MY3 flat glass internal house-side shield
1 Replace XX with color choice, eg: DB for Dark Bronze
Newark Accessories 8914556 93001585 PTL-1 PTL-8 PTL-5 PTL-6 PSC WB-S-XX1 MAF-XX1
NK1 Internal, house-side shield, Type III, IV, V NK2 Internal, house-side shield, Type II, III, IV, V (must use PCR (X) option) Photocontrol - Twistlock cell (120V) (must use PCR (X) option) Photocontrol - Twistlock cell (120, 208, 240, 277V) (must use PCR (X) option) Photocontrol - Twistlock cell (480V) (must use PCR (X) option) Photocontrol - Twistlock cell (347V) (must use PCR (X) option) Shorting cap - Twistlock Wall bracket 2-3/8" Mast arm fitter
1 Replace XX with color choice, eg: DB for Dark Bronze
oakland 1 & 2 - LPS Accessories ARM-OLPS-6-S-SS 6" arm for square pole only ARM-OLPS-12-S-XX 12" arm for square pole only (required for 90 deg. configurations) (must use PCR (X) option) PTL-1 Photocontrol - Twistlock cell (120V) (must use PCR (X) option) PTL-8 Photocontrol - Twistlock cell (120, 208, 240, 277V) (must use PCR (X) option) PTL-5 Photocontrol - Twistlock cell (480V) (must use PCR (X) option) PTL-6 Photocontrol - Twistlock cell (347V) (must use PCR (X) option) PSC Shorting cap - Twistlock
Mounting Accessories Tenon Adapters EPA ft2 (m2) For use with: AL, MY, OR, OD, WN, DL, SF, NK, OK (#1 Drill Pattern) Triangular steel adapter at 120 deg. .5 (0.05) FEA-2-XX Triangular steel adapter at 120 deg. .5 (0.05) FEA-3-XX SQ steel adapter - SGL .3 (0.03) 2-SA-SGL-D-XX SQ steel adapter - DBL at 90 deg. .3 (0.03) 2-SA-D90-XX SQ steel adapter - DBL at 180 deg. .3 (0.03) 2-SA-D180-XX SQ steel adapter - TPL at 90 deg. .3 (0.03) 2-SA-TPL-D90-XX SQ steel adapter - QUAD at 90 deg. .3 (0.03) 2-SA-QD-D-XX RD steel adapter - SGL .2 (0.02) 2-RA-SGL-D-XX1 RD steel adapter - DBL at 90 deg. .2 (0.02) 2-RA-D90-XX1 RD steel adapter - DBL at 180 deg. .2 (0.02) 2-RA-D180-XX1 RD steel adapter - TPL at 90 deg. .2 (0.02) 2-RA-TPL-D90-XX1 RD steel adapter - TPL at 120 deg. .2 (0.02) 2-RA-TPL-D120-XX1 RD steel adapter - QUAD at 90 deg. .2 (0.02) 2-RA-QD-D-XX1
m o u n t i n g ac c e s s o r i e s
Catalog Number
Description
FEA Series
Weight lbs. (kg)
120˚
17 17 10 10 10 10 10 9 9 9 9 9 9
SETA-XX1 RETA-XX1 TETA-XX1,2
2-RA Series
11"
4-1/2"
SETA-XX
RSS-490-XX
RSS-3120-XX1 MSS-90-X1
For use with: DM (#6 Drill Pattern) 4" Square pole top tenon adapter; 2 3/8”-2 7/8” OD slipfitter for max. four fixtures (90°) 4" Round pole top tenon adapter. 2 3/8”-2 7/8” OD slipfitter for max. four fixtures (90°); Order RSD-04-X (one per fixture) separately 4" Round pole top tenon adapter; 2 3/8”-2 7/8” OD slipfitter for max. three fixtures (120°) For use with: MSS and DS (#4 Drill Pattern) 4" Square pole top tenon adapter; 2 3/8”-2 7/8” OD slipfitter for max. four fixtures (90°)
0.4 (0.04)
20 (9)
0.2 (0.02)
20 (9)
9.5”
SETA 4”
TETA 4
FLB-12-XX FLB-24-XX SSS-T4-DB SSS-T5-DB4 TPR-2-M5X1 TPR-3-M5X2 TPR-4-M5X3 TA-4 TA-5 TA-6 285-B-3-XX 285-B-4-XX
Description
9.5
4”
SETA 4”
RETA 4”
9.5
9.5”
9.5
9.5
4”
RETA 4”
0.2 (0.02)
20 (9)
0.4 (0.04)
20 (9)
EPA Weight ft2 (m2) lbs. (kg)
Bracket slips over pole creating 2 3/8 OD tenon (lower ID = 3 1/16”) Bracket slips over pole creating 2 3/8 OD tenon (lower ID = ID = 3 1/2”) Bracket slips over pole creating 2 3/8 OD tenon (lower ID = ID = 4 5/8”) Will not fit in 3 gauge poles Brackets –Bronze color standard; For other colors add suffix to catalog number: -M50 Black finish, -M52 White finish; -M53 Gray finish
4”
TETA 4
SETA 4”
SSS-490-XX MSS-90-X
13 3/4”
15”
Flat surface bracket - natural aluminum finish Flat surface bracket - gray finish Flat surface bracket - 90° (lag bolt hole spacing is 6.75 on 16 OC, mounting hardware by others) 12” floodlight bracket for pole mounting .5 (.05) 6 (bracket requires internal pole access) 24” floodlight bracket for pole mounting 1.0 10 (.10) (bracket requires internal pole access) 2 3/8" OD Tenon top adapter for 4” square open top poles, — 17.5 (8) bronze finish (slips 9" into pole aligns with #6 drill pattern) 2 3/8" OD Tenon top adapter for 5” square open top poles, — 14.5 bronze finish (slips 9" into pole aligns with #6 drill pattern) (6.6) 2 1/2” to 2” pipe size tenon reducer — 6 (2.7) 3” to 2” pipe size tenon reducer — 8 (3.6) 4” to 2” pipe size tenon reducer — 9 (4.1) 2 3/8” OD Tenon top adapter for 4” square pole (11 GA pole) 2 3/8” OD Tenon top adapter for 5” square pole (11 GA pole) 2 3/8” OD Tenon top adapter for 6” square pole (11 GA pole) 3 1/2” to 2 3/8” Reducer (OD for both dimensions) 4 1/2” to 2 3/8” Reducer (OD for both dimensions) 1 2 3 4 Note
616
TETA-XX
RSS-490-XX RSS-3120-XX 4”
4” FLB-12/24
AFB-1
1 Replace X or XX with color designation (See bottom right of page) – 2 Must use 10” arm on fixture for 120˚ mounting
Catalog Number
9.5”
9.5
Tenon Brackets and Arms
AFB-1 AFB-1-M53 241-C-XX
RETA-XX
Description
TETA 4
1
4" sq.
6-5/8"
EPA Weight ft2 (m2) lbs. (kg) For use with: CR1, RCS, RCL, MSV, CM1, and CM2 (#2 Drill Pattern) 4" Square pole top tenon adapter; 2 3/8” OD slipfitter 0.4 (0.04) 20 (9) for max. four fixtures (90°) 4" Round pole top tenon adapter; 2 3/8” OD slipfitter for max. four fixtures (90°); Order 4" round pole adapt- 0.2 (0.02) 20 (9) ers separately Three sided pole top tenon adapter; 2 3/8” OD slipfitter 0.4 (0.04) 20 (9) for max. three fixtures (120°)
SSS-490-XX1
10-1/2"
11"
All tenon adapters slipfit over 2 3/8” OD tenon; Accommodates #1 hole pattern for arms 1 Requires appropriate 4 1/2” round pole adapter
Catalog Number
2-SA Series
5.25"
5"
2-3/8" OD tenon
5” hole spacing
6.75"
241-C Series
4 1/4” 3” Sq. tubing
12"/ 24"
13"
AFB-1
2-3/8" OD
8" sq.
SSS-TX Series
TPR Series
10"
TA-X Series
285-B Series
Replace XX with Replace X with TA-X-XX SSP-TX Color Designation Color Designation DB Dark Bronze 1 Dark Bronze Black BL 2 Black WH White 3 Gray GR Gray 4 White Platinum Silver PS 5 Platinum Silver RD Red (Premium Color) 6 Red (premium color) Forest Green FG 7 Forest Green (Premium Color) (premium color) Custom Color CC (consult factory)
RETA 4”
Mounting Accessories 2" 4" BC
4"
Catalog Number
SMA-X-XX
For use with: MY, OR, OD, WN, DL, SF, NK, OK Round luminaires require use of standard 6” arm between bracket & luminaire Single mounting arrangement, 1 ft. arm .3 SMA-1-XX1 Single mounting arrangement, 2 ft. arm .6 SMA-2-XX1 Single mounting arrangement, 3 ft. arm .9 SMA-3-XX1 Single mounting arrangement, 4 ft. arm 1.2 SMA-4-XX1
MAL-211 MAL-211-X Series
1 Replace X or XX with color designation (see bottom left of page)
Catalog Number CLB-2 Series
4"
MAL-211-X1
TPLB Series
CLB-2-XX1
TPLB-XX1 AADM Series
Adjusts in 5° increments
EPA Weight ft2 (m2) lbs. (kg)
Description For use with: DM Twin parallel mount - 30” on center / 4” arms for 2 3/8” OD tenon, includes two MAL-4-X series arms
Catalog Number
AASF Series
6 10 15 18
Twin Parallel Brackets
46"
6"
EPA Weight ft2 (m2) lbs. (kg)
Description
m o u n t i n g ac c e s s o r i e s
Mounting Brackets
2.0 (.2)
34.6 (15.7) EPA Weight ft2 (m2) lbs. (kg)
Description For use with: AL, MY, OR, OD, WN, DL, SF, NK, OK3 Twin parallel mount for two luminaires, mounts to pole with four bolts, pole must be configured with A1 or C1 drill pattern For use with: CR1, RCS, RCL, CM1, CM2, MSV Twin parallel luminaire bracket, must be configured with A2 or C2 drill pattern
2.4 (1.1)
1 Replace X or XX with color designation (see bottom left of page)
Adjusts in 5° increments
Adjustable Mounting Arms Catalog Number 2-3/8" OD Slipfitter
MAS-K-X1 MAS-TK-X1
2"
4" BC
4"
Catalog Number
Mounting Pattern for AADM
AASF-XX1,3 AADM-XX1,2
Description For use with: MSS 2 3/8” OD tenon slipfitter for single fixture 2 3/8” OD tenon slipfitter for twin fixtures (180°) Description For use with: MY, OR, OD, WN, DL, SF, NK Adjustable slipfitter mounting arm Adjustable direct mounting arm
EPA ft2 (m2)
Weight lbs. (kg)
— — EPA ft2 (m2)
5 (2.3) 7 (3.2) Weight lbs. (kg)
— —
10 (4.5) 5 (2.3)
EPA ft2 (m2)
Weight lbs. (kg)
— — 0.5 (0.05)
5 (2.3) 7 (3.2) 5.75 (2.6)
— — 0.5 (0.05)
5 (2.3) 7 (3.2) 5.75 (2.6)
1 Replace X or XX with color designation (see bottom left of page) 2 Arm utilizes #1 hole pattern 3 Arm utilizes #1 hole pattern on luminaire end
Catalog Number MAS-TK-X ARM-CR-TK-TA-X ARM-F-TK-TA-X
ARM-F-K-TA-XX1 ARM-F-TK-TA-XX1 ARM-F-K-S-XX1,3
Adjusts in 4° increments
ARM-CR-K-TA-XX1 ARM-CR-TK-TA-XX1 ARM-CR-K-S-XX1,3
MAL-TK-X
ARM-CR-K-S-X ARM-F-K-S-X
MAL-KF-X
Adjusts in 4° increments
Replace XX with color designation DB Dark Bronze Black BL WH White GR Gray Platinum Silver PS RD Red (Premium Color) Forest Green FG (Premium Color) Custom Color CC (consult factory)
Description For use with: RCS, RCL, MSV 2 3/8” OD tenon slipfitter for single fixture 2 3/8” OD tenon slipfitter for twin fixture (180°) 10” Adjustable arm For use with: CR1, CM1 & CM22 2 3/8” OD tenon slipfitter for single fixture 2 3/8” OD tenon slipfitter for twin fixture (180°) 10” Adjustable arm
1 Replace XX with color designation (see bottom left of page) 2 CM1, CM2 must use in conjunction with rigid arm 3 Direct pole mount only, not compatible with tenon adapters
Replace X with color designation 1 Dark Bronze 2 Black 3 Gray 4 White 5 Platinum Silver 6 Red (premium color) 7 Forest Green (premium color)
617
l u m i n a i r e m o u n t i n g d e ta i l
Mounting Accessories Mast Arm Fitter Catalog Number
Description For use with: AL, CM1, CM2 Horizontal mast arm fitter for 2 3/8” OD arm
MAF-CM-XX1 Catalog Number
Description For use with: OR, OD, DL, SF, NK, OK Horizontal mast arm fitter for 2 3/8” OD arm
MAF-XX1 Catalog Number
Description
EPA ft2 (m2)
Weight lbs. (kg)
— EPA ft2 (m2)
— Weight lbs. (kg)
— EPA ft2 (m2)
— Weight lbs. (kg)
—
—
For use with: CR1, RCS, RCL, MSV Use mounting arm, see p. 617
ARM-XX-K-TA1
MAF-CM-XX
MAF-XXX
1 Replace XX with Color Designation DB Dark Bronze Black BL WH White GR Gray Platinum Silver PS RD Red (Premium Color) Forest Green (Premium Color) FG Custom Color (consult factory) CC
AL, DL, DT2, MY, NK, OD, OR, SF, WN – SQUARE POLES Ø .438 4 HOLES
TO HOUSING
SQ. POLE COVER
2.0 SQUARE POLE
SQ. POLE COVER
1.25 TO HOUSING ARM
SQ.BOLT POLE COVER
4.0
Ø .875 HOLE
DT2
NUT PLATE DL, MY, NK, OD, OR,SQUARE POLE PF, WN
1.0 2.0
ARM COVER
#1 DRILL PATTERN FOR POLES #1 drill pattern
AL
SQUARE POLE
AL, DL, MY, NK, OD, OR, WN – ROUND TAPERED POLES & ROUND STRAIGHT POLES (FOR 4” OD & SMALLER)
AL, DL, MY, NK, OD, OR, WN – ROUND STRAIGHT POLES (4.5” OD & LARGER) Ø .438 4 HOLES
RND. POLE COVER
DL, MY, NK, OD, OR, PF, WN
TO HOUSING
POLE TOP
FIXTURE TO HOUSING
TAPERED POLE COVER
STRAIGHT SQUARE POLE
2.25
2.0
NUT PLATE
.875
1.25 4.0
POLE
DETROIT 2 3.5 NUT PLATE TAPERED POLE
ROUND POLE ADAPTER
ROUND POLE
ADAPTER
STRAIGHT ROUND POLE (41/2" - 6")
Ø .875 HOLE
Ø .875 HOLE
1.0 2.0
RND. POLE COVER
#1 drill pattern #1 DRILL PATTERN FOR POLES
AL
#2 #2DRILL drillPATTERN pattern
BOLT
TAPERED ROUND POLE & 4" STRAIGHT ROUND POLE
Ø .563 2 HOLES
TAPERED TAPERED POLE COVER POLE
NUT PLATE
SQ. POLE COVER
NUT PLATE
ARM
TO HOUSING
ARM COVER
SQUARE POLE
BOLT
SQ. POLE COVER
ARM
TO HOUSING
ARM COVER
SQUARE POLE TAPERED POLE ADAPTER
RND POLE ADAPTER TAPERED POLE ROUND POLE
618
STRAIGHT ROUND POLE (41/2" - 6")
TAPERED ROUND POLE & 4" STRAIGHT ROUND POLE
Mounting Details LOCKWASHER
SQ. POLE COVER
STANDARD ARM DETAIL
2.25
BOLTS FROM
FLATWASHER
GASKET
ARM COVER
.875 3.5
POLE COVER
INSIDE FIXTURE
POLE COVER
TO HOUSING (3-HOLE (PATTERN END)
NUT PLATE
NUTPLATE
TO HOUSING
CAST ADAPTOR FLAT WASHER
SQUARE POLE
LOCKWASHER HEX NUT
SCREW
Ø .563 2 HOLES
Ø .875 HOLE
NUT LOCKWASHER FLAT WASHER GASKET THREADED RODS ARM
l u m i n a i r e m o u n t i n g d e ta i l
CM1, CM2, CR1, MSV, RCL, RCS – ALL POLE SHAPES
POLE TOP
ARM COVER
ROUND POLE ADAPTER
SQUARE POLE
ROUND POLE
SQUARE POLE COVER
ROUND POLE
HEX NUT LOCKWASHER FLAT WASHER GASKET
RCL, RCS, MSV
THREADED ROD
#2 drill pattern
CM1, CM2
#2 DRILL PATTERN
FIGURECOVER 1
RETAINER WASHER
SQUARE AND ROUND POLES
TO
CAST ADAPTER
ARM
HOUSING (3-HOLE PATTERN END)
NUT PLATE
CR1 SQUARE POLE
ROUND POLE
SQUARE & ROUND POLES
DS, MSS – ALL POLE SHAPES
DT3 – SQUARE POLES
Ø .438 3 HOLES
Ø .563 4 HOLES 2.0
3.625 1.25 4.0
2.375
MAL-10-X MAL-4-X mas-4-x // mas-10-x
Ø .875 HOLE
1.0 2.0
1.187
#4 DRILL PATTERN FOR POLES
#5 DRILL PATTERN FOR POLES
#4 drill pattern
#5 drill pattern
MOUNTING TUBE
DM – ALL POLE SHAPES Ø.438 3 HOLES
FIXTURE
POLE TOP
3.625 POLE
DETROIT 3
4.062 2.034
mal-4-x / mal-10-x MAL-10-X / MAL-4-X
#6 drill pattern
msv-4-x / msv-10-x
#6 DRILL PATTERN FOR POLES
KEY AL CR1 CM1/CM2 RCS/RCL DT2 DT3 MSS MSV
Alaire Cimmarron Medallion - Sm/Lg Raven - Sm/Lg Detriot 2 Detriot 3 Magnuspec M-Pulsive
NK SF MY WN DL DS DM OD OR
Newark - Sm/Med Santa Fe - Sm/Med/Lg Monterey - Sm/Med/Lg Washington - Sm/Med/Lg Dallas - Sm/Med/Lg Small Magnudisc Med Magnudisc Orlando Dome - Med/Lg Orlando Round - Med/Lg
619
OK3
Oakland 3 Single Lamp mount luminaire flush mounts to pole. Parallel wall mount includes 1” deep mounting bracket • Lamps and lamp support devices included; Enclosed sockets, with nickel-plated brass contacts for singleended, bayonet base LPS lamps • HR type ballast, HPF, starting rated at -20°F; Ballast components mounted on removable panel and provided with in-line disconnects • Durable Lektrocote® TGIC thermoset polyester powder coat paint finish assures long life and maintenancefree service • Listed to UL1598 for use in wet locations • IESNA full cut-off classified
lps luminaires
• Formed and welded aluminum housing with optional embossed decorative band and color vinyl trim stripe • Extruded aluminum door with clear, flat polycarbonate lens, fully gasketed to housing; Concealed hinge secures door to housing and two spring-loaded latches allow tool-free access to lamp • Specular, anodized aluminum reflectors provide Type IV or V light patterns. Type V reflector incorporates segmented side reflectors positioned parallel with lamp; Parallel mount luminaries available with Type IV only; Optical assembly secured with quarter-turn fasteners for access to ballast compartment • Extruded aluminum arm required for pole mount; Yoke mount has two square arms attaching housing to square slipfitter for 2.375” OD tenon; Parallel pole
LAMP INCLUDED
arm logic (order separately)
Ordering Information
OK3
series
F
series
ARM Rigid arm LENS
LAMP ORIENT./DISTR.
OK3 Oakland 3
F Flat -
H4 Horiz. IV (YT, PP & PW
(single lamp)
polycarbonate
mounting type)
H5 Horiz. V (square)
(A, YT mounting type)
mount
Q2 Quad-Tap 120/208/240/277V ®
included, order separately) YT Yoke mount (2 3/8” tenon) PP Parallel pole mount (sq. poles only) PW Parallel wall mount
F(X) Fusing (replace X with
voltage: 1-120, 2-208, 3-240, 4-277, 5-480, 6-347)
T2 Tri-Tap 120/277/347V (CSA) 5 480V
(replace X with voltage: 1-120, 2-208, 3-240, 4-277, 5-480, 6-347)
COLOR
low pressure sodium
DB Dark Bronze
L90 90w (T-21)
BL Black WH White
L13 135w (T-21) L18 180w (T-21)
EB Embossed band
GR Gray PS Platinum Silver RD Red
L90 L13 L18
A D C Arm Mount
Yoke Mount
Parallel P ole Mount
A B C 14 1/4” 24 1/2” 7 1/2” 362 mm 622 mm 191 mm 14 1/4” 34 1/2” 7 1/2” 362 mm 876 mm 191 mm 14 1/4” 48” 7 1/2” 362 mm 1219 mm 191 mm Note:
(EPA = 0.4 ft2, 5 lbs) (0.03 m2, 2.2 kg)
pole shape #1 drill pattern S Square R4 Round straight (4.5") R5 Round straight (5") R6 Round straight (6") #2 drill pattern T2 Round tapered (2.5") T3 Round tapered (3") T35 Round tapered (3.5") T4 Round tapered & COLOR Dark Bronze
Black White Gray Platinum Silver Red (premium color) Forest Green (premium color) CC Custom Color (consult factory)
see page 615 for accessories
103 10" Arm
DB BL WH GR PS RD FG
Lamp and support device included Factory wired to highest voltage unless specified Required for 90° configurations
B
(EPA = 0.24 ft2, 3.5 lbs) (0.02 m2, 1.5 kg)
straight (4")
(premium color) FG Forest Green (premium color) CC Custom Color (consult factory)
1 2 3
Arm Length 6 6" Arm
R(XX) Reveal (replace XX
with color designation); EB option must be chosen with reveal option
source/wattage1
S Square/ rectangular
PR(X) Photo cell receptacle
voltage
A Arm mount (arm not
luminaire shape
OPTIONS
D 26 3/4” 679 mm 26 3/4” 679 mm 26 3/4” 679 mm
EPA 1.4 ft² 0.1 m² 2.1 ft² 0.2 m² 3 ft² 0.3 m²
Weight 29 lbs. 13.1 kg 37 lbs. 16.8 kg 40 lbs. 18.1 kg
• EPA and weight values do not include mounting arm • Yoke mounting adds 3.5 ft2 EPA and approx. 11 lbs
609
Accessories l u m i n a i r e ac c e s s o r i e s
Medallion 1 & LPS Accessories ARM-CR-K-TA-XX1 2 3/8" OD tenon slipfitter for single fixture ARM-CR-TK-TA-XX1 2 3/8" OD tenon slipfitter for single fixture (180˚) ARM-CR-K-S-XX1 10" Adjustable arm for flat surfaces 5" rigid straight arm ARM-C-5-S-XX1 ARM-C-10-S-XX1 10" rigid straight arm ARM-CRD-6-S-XX1 6" rigid upswept arm Round pole adapter for straight and CRD-RPA2-xx1 upswept arm (2 3/4” to 3 1/8” dia. pole) Round pole adapter for straight and CRD-RPA3-xx1 upswept arm (3 1/4” to 3 3/4” dia. pole) Round pole adapter for straight and CRD-RPA4-xx1 upswept arm (3 7/8” to 4 1/2” dia. pole) Round pole adapter for straight and CRD-RPA5-xx1 upswept arm (5” dia. pole) Round pole adapter for straight and CRD-RPA6-xx1 upswept arm (6” dia. pole) Adjustable arm, direct mount AADM-XX1 Square pole tenon adapter (4 @ 90°) (2 sETA-xx1 3/8"-2 7/8" OD tenon) Round pole tenon adapter (4 @ 90°) rETA-xx1 (2 3/8"-2 7/8" OD tenon) (requires 4" round pole adapter) Hexagon pole tenon adapter (3 @ TETA-xx1 120°) (2 3/8"-2 7/8" OD tenon) Wall bracket WB-CR-XX1 Horizontal mast arm fitter for 2 3/8" OD MAf-CM-XX1 mast arm Twin parallel luminaire bracket TPLB-XX1 CM1 internal house-side shield 8914527 Polycarbonate vandal shield CR1-PVG External house-side (EPA = .57) shield CM1-EHS-XX1 (must use PCR (X) option) Photocontrol PTL-1 - Twistlock cell (120V) (must use PCR (X) option) Photocontrol PTL-8 - Twistlock cell (120, 208, 240, 277V) (must use PCR (X) option) Photocontrol PTL-5 - Twistlock cell (480V) (must use PCR (X) option) Photocontrol PTL-6 - Twistlock cell (347V) (must use PCR (X) option) Shorting cap PSC - Twistlock 1 Replace XX with color choice, eg: DB for Dark Bronze
Medallion II Accessories ARM-CR-K-TA-XX1 2 3/8" OD tenon slipfitter for single fixture ARM-CR-TK-TA-XX1 2 3/8" OD tenon slipfitter for single fixture (180˚) ARM-CR-K-S-XX1 10" Adjustable arm for flat surfaces External house-side shield cm2-ehs-xx1 Internal house-side shield cm2-ihs-hl (horizontal lamp units) Bracket for 2 3/8" OD horizontal maf-cm-xx1 mast arm Photocontrol - Twist-Lock® cell ptl-1 (120V) Photocontrol - Twist-Lock® cell ptl-8 (120-277V) Photocontrol - Twist-Lock® cell ptl-5 (480V) Photocontrol - Twist-Lock® cell ptl-6 (347V) Shorting cap - Twist-Lock® psc Polycarbonate vandal shield CM2-PVG 1 Replace XX with color choice, eg: DB for Dark Bronze
Msv m-pulsive Accessories msv-ihs-h3
Internal house-side shield (H3 distribution) Extreme glare shield for flat glass msv-fggs-2 units only (mounts to housing); restricts lighting to any one side of fixture; black finish standard Glare shield for sag glass units msv-gs only; restricts light to any one side of fixture, black finish standard Polycarbonate vandal guard msv-pvg Flush mount kit - direct mount FDMLH luminaire hardware kit Round pole adapter (2 3/4 - 3 1/8") f-RPA2-XX1,2 Round pole adapter (3 1/4 - 3 3/4") f-RPA3-XX1,2 Round pole adapter (3 7/8 - 4 1/2") f-RPA4-XX1,2 Round pole adapter (5") f-RPA5-XX1,2 Round pole adapter (6") f-RPA6-XX1,2 Wall bracket WB-CR-XX1 Photocontrol - Twist-Lock cell ptl-1 (120V) Photocontrol - Twist-Lock cell (120ptl-8 277V) Photocontrol - Twist-Lock cell ptl-5 (480V) Photocontrol - Twist-Lock cell ptl-6 (347V) Shorting Cap - Twist-Lock psc 4'' Arm arm-f-4-db arm-f-10-s-db 10'' Arm 1 Replace XX with color choice, eg.: DB for Dark Bronze 2 When ordering poles, specify Pole Drill Pattern #2
614
Monterey Accessories WB-R-xx1 8914529 8914528 8914548
Wall bracket; 6" arm included MY1 flat glass internal house-side shield MY2 flat glass internal house-side shield MY3 flat glass internal house-side shield
1 Replace XX with color choice, eg: DB for Dark Bronze
Newark Accessories 8914556 93001585 PTL-1 PTL-8 PTL-5 PTL-6 PSC WB-S-XX1 MAF-XX1
NK1 Internal, house-side shield, Type III, IV, V NK2 Internal, house-side shield, Type II, III, IV, V (must use PCR (X) option) Photocontrol - Twistlock cell (120V) (must use PCR (X) option) Photocontrol - Twistlock cell (120, 208, 240, 277V) (must use PCR (X) option) Photocontrol - Twistlock cell (480V) (must use PCR (X) option) Photocontrol - Twistlock cell (347V) (must use PCR (X) option) Shorting cap - Twistlock Wall bracket 2-3/8" Mast arm fitter
1 Replace XX with color choice, eg: DB for Dark Bronze
oakland 1 & 2 - LPS Accessories ARM-OLPS-6-S-SS 6" arm for square pole only ARM-OLPS-12-S-XX 12" arm for square pole only (required for 90 deg. configurations) (must use PCR (X) option) PTL-1 Photocontrol - Twistlock cell (120V) (must use PCR (X) option) PTL-8 Photocontrol - Twistlock cell (120, 208, 240, 277V) (must use PCR (X) option) PTL-5 Photocontrol - Twistlock cell (480V) (must use PCR (X) option) PTL-6 Photocontrol - Twistlock cell (347V) (must use PCR (X) option) PSC Shorting cap - Twistlock
Mounting Accessories Tenon Adapters EPA ft2 (m2) For use with: AL, MY, OR, OD, WN, DL, SF, NK, OK (#1 Drill Pattern) Triangular steel adapter at 120 deg. .5 (0.05) FEA-2-XX Triangular steel adapter at 120 deg. .5 (0.05) FEA-3-XX SQ steel adapter - SGL .3 (0.03) 2-SA-SGL-D-XX SQ steel adapter - DBL at 90 deg. .3 (0.03) 2-SA-D90-XX SQ steel adapter - DBL at 180 deg. .3 (0.03) 2-SA-D180-XX SQ steel adapter - TPL at 90 deg. .3 (0.03) 2-SA-TPL-D90-XX SQ steel adapter - QUAD at 90 deg. .3 (0.03) 2-SA-QD-D-XX RD steel adapter - SGL .2 (0.02) 2-RA-SGL-D-XX1 RD steel adapter - DBL at 90 deg. .2 (0.02) 2-RA-D90-XX1 RD steel adapter - DBL at 180 deg. .2 (0.02) 2-RA-D180-XX1 RD steel adapter - TPL at 90 deg. .2 (0.02) 2-RA-TPL-D90-XX1 RD steel adapter - TPL at 120 deg. .2 (0.02) 2-RA-TPL-D120-XX1 RD steel adapter - QUAD at 90 deg. .2 (0.02) 2-RA-QD-D-XX1
m o u n t i n g ac c e s s o r i e s
Catalog Number
Description
FEA Series
Weight lbs. (kg)
120˚
17 17 10 10 10 10 10 9 9 9 9 9 9
SETA-XX1 RETA-XX1 TETA-XX1,2
2-RA Series
11"
4-1/2"
SETA-XX
RSS-490-XX
RSS-3120-XX1 MSS-90-X1
For use with: DM (#6 Drill Pattern) 4" Square pole top tenon adapter; 2 3/8”-2 7/8” OD slipfitter for max. four fixtures (90°) 4" Round pole top tenon adapter. 2 3/8”-2 7/8” OD slipfitter for max. four fixtures (90°); Order RSD-04-X (one per fixture) separately 4" Round pole top tenon adapter; 2 3/8”-2 7/8” OD slipfitter for max. three fixtures (120°) For use with: MSS and DS (#4 Drill Pattern) 4" Square pole top tenon adapter; 2 3/8”-2 7/8” OD slipfitter for max. four fixtures (90°)
0.4 (0.04)
20 (9)
0.2 (0.02)
20 (9)
9.5”
SETA 4”
TETA 4
FLB-12-XX FLB-24-XX SSS-T4-DB SSS-T5-DB4 TPR-2-M5X1 TPR-3-M5X2 TPR-4-M5X3 TA-4 TA-5 TA-6 285-B-3-XX 285-B-4-XX
Description
9.5
4”
SETA 4”
RETA 4”
9.5
9.5”
9.5
9.5
4”
RETA 4”
0.2 (0.02)
20 (9)
0.4 (0.04)
20 (9)
EPA Weight ft2 (m2) lbs. (kg)
Bracket slips over pole creating 2 3/8 OD tenon (lower ID = 3 1/16”) Bracket slips over pole creating 2 3/8 OD tenon (lower ID = ID = 3 1/2”) Bracket slips over pole creating 2 3/8 OD tenon (lower ID = ID = 4 5/8”) Will not fit in 3 gauge poles Brackets –Bronze color standard; For other colors add suffix to catalog number: -M50 Black finish, -M52 White finish; -M53 Gray finish
4”
TETA 4
SETA 4”
SSS-490-XX MSS-90-X
13 3/4”
15”
Flat surface bracket - natural aluminum finish Flat surface bracket - gray finish Flat surface bracket - 90° (lag bolt hole spacing is 6.75 on 16 OC, mounting hardware by others) 12” floodlight bracket for pole mounting .5 (.05) 6 (bracket requires internal pole access) 24” floodlight bracket for pole mounting 1.0 10 (.10) (bracket requires internal pole access) 2 3/8" OD Tenon top adapter for 4” square open top poles, — 17.5 (8) bronze finish (slips 9" into pole aligns with #6 drill pattern) 2 3/8" OD Tenon top adapter for 5” square open top poles, — 14.5 bronze finish (slips 9" into pole aligns with #6 drill pattern) (6.6) 2 1/2” to 2” pipe size tenon reducer — 6 (2.7) 3” to 2” pipe size tenon reducer — 8 (3.6) 4” to 2” pipe size tenon reducer — 9 (4.1) 2 3/8” OD Tenon top adapter for 4” square pole (11 GA pole) 2 3/8” OD Tenon top adapter for 5” square pole (11 GA pole) 2 3/8” OD Tenon top adapter for 6” square pole (11 GA pole) 3 1/2” to 2 3/8” Reducer (OD for both dimensions) 4 1/2” to 2 3/8” Reducer (OD for both dimensions) 1 2 3 4 Note
616
TETA-XX
RSS-490-XX RSS-3120-XX 4”
4” FLB-12/24
AFB-1
1 Replace X or XX with color designation (See bottom right of page) – 2 Must use 10” arm on fixture for 120˚ mounting
Catalog Number
9.5”
9.5
Tenon Brackets and Arms
AFB-1 AFB-1-M53 241-C-XX
RETA-XX
Description
TETA 4
1
4" sq.
6-5/8"
EPA Weight ft2 (m2) lbs. (kg) For use with: CR1, RCS, RCL, MSV, CM1, and CM2 (#2 Drill Pattern) 4" Square pole top tenon adapter; 2 3/8” OD slipfitter 0.4 (0.04) 20 (9) for max. four fixtures (90°) 4" Round pole top tenon adapter; 2 3/8” OD slipfitter for max. four fixtures (90°); Order 4" round pole adapt- 0.2 (0.02) 20 (9) ers separately Three sided pole top tenon adapter; 2 3/8” OD slipfitter 0.4 (0.04) 20 (9) for max. three fixtures (120°)
SSS-490-XX1
10-1/2"
11"
All tenon adapters slipfit over 2 3/8” OD tenon; Accommodates #1 hole pattern for arms 1 Requires appropriate 4 1/2” round pole adapter
Catalog Number
2-SA Series
5.25"
5"
2-3/8" OD tenon
5” hole spacing
6.75"
241-C Series
4 1/4” 3” Sq. tubing
12"/ 24"
13"
AFB-1
2-3/8" OD
8" sq.
SSS-TX Series
TPR Series
10"
TA-X Series
285-B Series
Replace XX with Replace X with TA-X-XX SSP-TX Color Designation Color Designation DB Dark Bronze 1 Dark Bronze Black BL 2 Black WH White 3 Gray GR Gray 4 White Platinum Silver PS 5 Platinum Silver RD Red (Premium Color) 6 Red (premium color) Forest Green FG 7 Forest Green (Premium Color) (premium color) Custom Color CC (consult factory)
RETA 4”
Mounting Accessories 2" 4" BC
4"
Catalog Number
SMA-X-XX
For use with: MY, OR, OD, WN, DL, SF, NK, OK Round luminaires require use of standard 6” arm between bracket & luminaire Single mounting arrangement, 1 ft. arm .3 SMA-1-XX1 Single mounting arrangement, 2 ft. arm .6 SMA-2-XX1 Single mounting arrangement, 3 ft. arm .9 SMA-3-XX1 Single mounting arrangement, 4 ft. arm 1.2 SMA-4-XX1
MAL-211 MAL-211-X Series
1 Replace X or XX with color designation (see bottom left of page)
Catalog Number CLB-2 Series
4"
MAL-211-X1
TPLB Series
CLB-2-XX1
TPLB-XX1 AADM Series
Adjusts in 5° increments
EPA Weight ft2 (m2) lbs. (kg)
Description For use with: DM Twin parallel mount - 30” on center / 4” arms for 2 3/8” OD tenon, includes two MAL-4-X series arms
Catalog Number
AASF Series
6 10 15 18
Twin Parallel Brackets
46"
6"
EPA Weight ft2 (m2) lbs. (kg)
Description
m o u n t i n g ac c e s s o r i e s
Mounting Brackets
2.0 (.2)
34.6 (15.7) EPA Weight ft2 (m2) lbs. (kg)
Description For use with: AL, MY, OR, OD, WN, DL, SF, NK, OK3 Twin parallel mount for two luminaires, mounts to pole with four bolts, pole must be configured with A1 or C1 drill pattern For use with: CR1, RCS, RCL, CM1, CM2, MSV Twin parallel luminaire bracket, must be configured with A2 or C2 drill pattern
2.4 (1.1)
1 Replace X or XX with color designation (see bottom left of page)
Adjusts in 5° increments
Adjustable Mounting Arms Catalog Number 2-3/8" OD Slipfitter
MAS-K-X1 MAS-TK-X1
2"
4" BC
4"
Catalog Number
Mounting Pattern for AADM
AASF-XX1,3 AADM-XX1,2
Description For use with: MSS 2 3/8” OD tenon slipfitter for single fixture 2 3/8” OD tenon slipfitter for twin fixtures (180°) Description For use with: MY, OR, OD, WN, DL, SF, NK Adjustable slipfitter mounting arm Adjustable direct mounting arm
EPA ft2 (m2)
Weight lbs. (kg)
— — EPA ft2 (m2)
5 (2.3) 7 (3.2) Weight lbs. (kg)
— —
10 (4.5) 5 (2.3)
EPA ft2 (m2)
Weight lbs. (kg)
— — 0.5 (0.05)
5 (2.3) 7 (3.2) 5.75 (2.6)
— — 0.5 (0.05)
5 (2.3) 7 (3.2) 5.75 (2.6)
1 Replace X or XX with color designation (see bottom left of page) 2 Arm utilizes #1 hole pattern 3 Arm utilizes #1 hole pattern on luminaire end
Catalog Number MAS-TK-X ARM-CR-TK-TA-X ARM-F-TK-TA-X
ARM-F-K-TA-XX1 ARM-F-TK-TA-XX1 ARM-F-K-S-XX1,3
Adjusts in 4° increments
ARM-CR-K-TA-XX1 ARM-CR-TK-TA-XX1 ARM-CR-K-S-XX1,3
MAL-TK-X
ARM-CR-K-S-X ARM-F-K-S-X
MAL-KF-X
Adjusts in 4° increments
Replace XX with color designation DB Dark Bronze Black BL WH White GR Gray Platinum Silver PS RD Red (Premium Color) Forest Green FG (Premium Color) Custom Color CC (consult factory)
Description For use with: RCS, RCL, MSV 2 3/8” OD tenon slipfitter for single fixture 2 3/8” OD tenon slipfitter for twin fixture (180°) 10” Adjustable arm For use with: CR1, CM1 & CM22 2 3/8” OD tenon slipfitter for single fixture 2 3/8” OD tenon slipfitter for twin fixture (180°) 10” Adjustable arm
1 Replace XX with color designation (see bottom left of page) 2 CM1, CM2 must use in conjunction with rigid arm 3 Direct pole mount only, not compatible with tenon adapters
Replace X with color designation 1 Dark Bronze 2 Black 3 Gray 4 White 5 Platinum Silver 6 Red (premium color) 7 Forest Green (premium color)
617
l u m i n a i r e m o u n t i n g d e ta i l
Mounting Accessories Mast Arm Fitter Catalog Number
Description For use with: AL, CM1, CM2 Horizontal mast arm fitter for 2 3/8” OD arm
MAF-CM-XX1 Catalog Number
Description For use with: OR, OD, DL, SF, NK, OK Horizontal mast arm fitter for 2 3/8” OD arm
MAF-XX1 Catalog Number
Description
EPA ft2 (m2)
Weight lbs. (kg)
— EPA ft2 (m2)
— Weight lbs. (kg)
— EPA ft2 (m2)
— Weight lbs. (kg)
—
—
For use with: CR1, RCS, RCL, MSV Use mounting arm, see p. 617
ARM-XX-K-TA1
MAF-CM-XX
MAF-XXX
1 Replace XX with Color Designation DB Dark Bronze Black BL WH White GR Gray Platinum Silver PS RD Red (Premium Color) Forest Green (Premium Color) FG Custom Color (consult factory) CC
AL, DL, DT2, MY, NK, OD, OR, SF, WN – SQUARE POLES Ø .438 4 HOLES
TO HOUSING
SQ. POLE COVER
2.0 SQUARE POLE
SQ. POLE COVER
1.25 TO HOUSING ARM
SQ.BOLT POLE COVER
4.0
Ø .875 HOLE
DT2
NUT PLATE DL, MY, NK, OD, OR,SQUARE POLE PF, WN
1.0 2.0
ARM COVER
#1 DRILL PATTERN FOR POLES #1 drill pattern
AL
SQUARE POLE
AL, DL, MY, NK, OD, OR, WN – ROUND TAPERED POLES & ROUND STRAIGHT POLES (FOR 4” OD & SMALLER)
AL, DL, MY, NK, OD, OR, WN – ROUND STRAIGHT POLES (4.5” OD & LARGER) Ø .438 4 HOLES
RND. POLE COVER
DL, MY, NK, OD, OR, PF, WN
TO HOUSING
POLE TOP
FIXTURE TO HOUSING
TAPERED POLE COVER
STRAIGHT SQUARE POLE
2.25
2.0
NUT PLATE
.875
1.25 4.0
POLE
DETROIT 2 3.5 NUT PLATE TAPERED POLE
ROUND POLE ADAPTER
ROUND POLE
ADAPTER
STRAIGHT ROUND POLE (41/2" - 6")
Ø .875 HOLE
Ø .875 HOLE
1.0 2.0
RND. POLE COVER
#1 drill pattern #1 DRILL PATTERN FOR POLES
AL
#2 #2DRILL drillPATTERN pattern
BOLT
TAPERED ROUND POLE & 4" STRAIGHT ROUND POLE
Ø .563 2 HOLES
TAPERED TAPERED POLE COVER POLE
NUT PLATE
SQ. POLE COVER
NUT PLATE
ARM
TO HOUSING
ARM COVER
SQUARE POLE
BOLT
SQ. POLE COVER
ARM
TO HOUSING
ARM COVER
SQUARE POLE TAPERED POLE ADAPTER
RND POLE ADAPTER TAPERED POLE ROUND POLE
618
STRAIGHT ROUND POLE (41/2" - 6")
TAPERED ROUND POLE & 4" STRAIGHT ROUND POLE
Mounting Details LOCKWASHER
SQ. POLE COVER
STANDARD ARM DETAIL
2.25
BOLTS FROM
FLATWASHER
GASKET
ARM COVER
.875 3.5
POLE COVER
INSIDE FIXTURE
POLE COVER
TO HOUSING (3-HOLE (PATTERN END)
NUT PLATE
NUTPLATE
TO HOUSING
CAST ADAPTOR FLAT WASHER
SQUARE POLE
LOCKWASHER HEX NUT
SCREW
Ø .563 2 HOLES
Ø .875 HOLE
NUT LOCKWASHER FLAT WASHER GASKET THREADED RODS ARM
l u m i n a i r e m o u n t i n g d e ta i l
CM1, CM2, CR1, MSV, RCL, RCS – ALL POLE SHAPES
POLE TOP
ARM COVER
ROUND POLE ADAPTER
SQUARE POLE
ROUND POLE
SQUARE POLE COVER
ROUND POLE
HEX NUT LOCKWASHER FLAT WASHER GASKET
RCL, RCS, MSV
THREADED ROD
#2 drill pattern
CM1, CM2
#2 DRILL PATTERN
FIGURECOVER 1
RETAINER WASHER
SQUARE AND ROUND POLES
TO
CAST ADAPTER
ARM
HOUSING (3-HOLE PATTERN END)
NUT PLATE
CR1 SQUARE POLE
ROUND POLE
SQUARE & ROUND POLES
DS, MSS – ALL POLE SHAPES
DT3 – SQUARE POLES
Ø .438 3 HOLES
Ø .563 4 HOLES 2.0
3.625 1.25 4.0
2.375
MAL-10-X MAL-4-X mas-4-x // mas-10-x
Ø .875 HOLE
1.0 2.0
1.187
#4 DRILL PATTERN FOR POLES
#5 DRILL PATTERN FOR POLES
#4 drill pattern
#5 drill pattern
MOUNTING TUBE
DM – ALL POLE SHAPES Ø.438 3 HOLES
FIXTURE
POLE TOP
3.625 POLE
DETROIT 3
4.062 2.034
mal-4-x / mal-10-x MAL-10-X / MAL-4-X
#6 drill pattern
msv-4-x / msv-10-x
#6 DRILL PATTERN FOR POLES
KEY AL CR1 CM1/CM2 RCS/RCL DT2 DT3 MSS MSV
Alaire Cimmarron Medallion - Sm/Lg Raven - Sm/Lg Detriot 2 Detriot 3 Magnuspec M-Pulsive
NK SF MY WN DL DS DM OD OR
Newark - Sm/Med Santa Fe - Sm/Med/Lg Monterey - Sm/Med/Lg Washington - Sm/Med/Lg Dallas - Sm/Med/Lg Small Magnudisc Med Magnudisc Orlando Dome - Med/Lg Orlando Round - Med/Lg
619
