'Off' Switch
Cen-Tech Seven Function Digital Multimeter 'On'/'Off' Switch Replacement
Cen-Tech Seven Function Digital Multimeter 'On'/'Off' Switch Replacement This guide will show how to replace the 'on'/'off' switch if it is not functional.
撰写者: Rebekah Allison
© iFixit — CC BY-NC-SA
zh.iFixit.com
1 / 6 页
Cen-Tech Seven Function Digital Multimeter 'On'/'Off' Switch Replacement
介绍 If the 'on'/'off' switch of the device is stuck in the 'off' position, the device will not turn on. This guide will show how to access and replace the switch from within.
工具:
章节:
Phillips #0 Screwdriver (1)
Cen-Tech Seven Function Multimeter 'On' 'Off' Switch (1)
Flathead 3/32" or 2.5 mm Screwdriver (1)
© iFixit — CC BY-NC-SA
zh.iFixit.com
2 / 6 页
Cen-Tech Seven Function Digital Multimeter 'On'/'Off' Switch Replacement
步骤 1 — Position Device
Place the meter face down, so the back panel and screws can be seen.
步骤 2 — Remove Back Panel Screws
Unscrew the two 9mm screws on the back panel using a #0 Phillips screwdriver.
© iFixit — CC BY-NC-SA
zh.iFixit.com
3 / 6 页
Cen-Tech Seven Function Digital Multimeter 'On'/'Off' Switch Replacement
步骤 3 — Remove Back Panel
Remove the back panel of the device by lifting upward.
Remove the battery from the meter before continuing.
步骤 4 — Unscrew Motherboard
Using a 2.5 mm flat screwdriver, remove the four 7mm screws holding the circuit board in place.
© iFixit — CC BY-NC-SA
zh.iFixit.com
4 / 6 页
Cen-Tech Seven Function Digital Multimeter 'On'/'Off' Switch Replacement
步骤 5 — Remove Motherboard
Gently lift the circuit board away from the device casing.
Remove the battery after removing the back cover to reduce the chances of short-circuiting the circuit board.
步骤 6 — Locate 'On'/'Off' Switch
© iFixit — CC BY-NC-SA
zh.iFixit.com
The 'on'/'off' switch is located directly beneath the dial.
5 / 6 页
Cen-Tech Seven Function Digital Multimeter 'On'/'Off' Switch Replacement
步骤 7 — Remove 'On'/'Off' Switch
Gently remove switch from device by lifting upward.
Either clean or replace switch.
To reassemble your device, follow these instructions in reverse order. 此文档最后生成于 2017-09-03 09:19:44 AM。
© iFixit — CC BY-NC-SA
zh.iFixit.com
6 / 6 页
Cen-Tech Seven Function Digital Multimeter 'On'/'Off' Switch Replacement This guide will show how to replace the 'on'/'off' switch if it is not functional.
撰写者: Rebekah Allison
© iFixit — CC BY-NC-SA
zh.iFixit.com
1 / 6 页
Cen-Tech Seven Function Digital Multimeter 'On'/'Off' Switch Replacement
介绍 If the 'on'/'off' switch of the device is stuck in the 'off' position, the device will not turn on. This guide will show how to access and replace the switch from within.
工具:
章节:
Phillips #0 Screwdriver (1)
Cen-Tech Seven Function Multimeter 'On' 'Off' Switch (1)
Flathead 3/32" or 2.5 mm Screwdriver (1)
© iFixit — CC BY-NC-SA
zh.iFixit.com
2 / 6 页
Cen-Tech Seven Function Digital Multimeter 'On'/'Off' Switch Replacement
步骤 1 — Position Device
Place the meter face down, so the back panel and screws can be seen.
步骤 2 — Remove Back Panel Screws
Unscrew the two 9mm screws on the back panel using a #0 Phillips screwdriver.
© iFixit — CC BY-NC-SA
zh.iFixit.com
3 / 6 页
Cen-Tech Seven Function Digital Multimeter 'On'/'Off' Switch Replacement
步骤 3 — Remove Back Panel
Remove the back panel of the device by lifting upward.
Remove the battery from the meter before continuing.
步骤 4 — Unscrew Motherboard
Using a 2.5 mm flat screwdriver, remove the four 7mm screws holding the circuit board in place.
© iFixit — CC BY-NC-SA
zh.iFixit.com
4 / 6 页
Cen-Tech Seven Function Digital Multimeter 'On'/'Off' Switch Replacement
步骤 5 — Remove Motherboard
Gently lift the circuit board away from the device casing.
Remove the battery after removing the back cover to reduce the chances of short-circuiting the circuit board.
步骤 6 — Locate 'On'/'Off' Switch
© iFixit — CC BY-NC-SA
zh.iFixit.com
The 'on'/'off' switch is located directly beneath the dial.
5 / 6 页
Cen-Tech Seven Function Digital Multimeter 'On'/'Off' Switch Replacement
步骤 7 — Remove 'On'/'Off' Switch
Gently remove switch from device by lifting upward.
Either clean or replace switch.
To reassemble your device, follow these instructions in reverse order. 此文档最后生成于 2017-09-03 09:19:44 AM。
© iFixit — CC BY-NC-SA
zh.iFixit.com
6 / 6 页
