Offset Light Mount Kit Universal Fit - RevZilla
Installation Instructions
Offset Light Mount Kit Universal Fit
1
Offset Bracket
2Socket Low Head
3
4 Spacer
Cap Screw
Spacer
Compatible with Denali: D1
D2
DM
DX
LAH.00.051
M8x12.....................DIN 7984
Da:12.7 Di:6.5 H:14.3
Da:12.7 Di:6.5 H:22.2
Qty........................2
Qty........................2
Qty.........................2
Qty.........................2
7
8
LAH.00.10000 Instruction Rev: 00 Twisted Throttle LLC 570 Nooseneck Hill Rd Exeter, RI 02822
Phone: 401.284.4200 Fax: 401.223.6954 www.twistedthrottle.com
PLEASE READ BEFORE INSTALLING TWISTED THROTTLE products should be installed by a qualified, experienced motorcycle technician. If you are unsure of your ability to properly install a product, please have the product installed by your local motorcycle dealer. TWISTED THROTTLE takes no responsibility for damages caused by improper installation. Medium strength liquid thread-locker (i.e., "Locktite") should be used to secure all screws, bolts, and nuts.
5
M6 Bushing
6
Lens Head Screw
Lens Head Screw
Lens Head Screw
BB.180.080.062.075.060.01
M6x30.................ISO 7380
M6x50.................ISO 7380
M6x60.................ISO 7380
Qty........................2
Qty.........................2
Qty.........................2
Qty.........................2
10
11
12
9 M5 Bushing
Lens Head Screw
Lens Head Screw
Lens Head Screw
BB.140.080.052.064.052.01
M5x30.................ISO 7380
M5x50.................ISO 7380
M5x60.................ISO 7380
Qty........................2
Qty.........................2
Qty.........................2
Qty.........................2
All screws, bolts, and nuts should be checked after driving the first 30 miles (50 km) to ensure that all are tightened to the proper torque. All screws, bolts, and nuts, including all replacement hardware provided by TWISTED THROTTLE should be tightened to the torque specified in the OEM maintenance manual for your motorcycle. If no torque specifications are provided in the OEM maintenance manual, the following torques may be used: M5.........................................................3.5 ft-lbs (5 Nm) M6.........................................................6.5 ft-lbs (9 Nm) M8........................................................16 ft-lbs (22 Nm) M10......................................................32 ft-lbs (43 Nm) M12..................................................... 55 ft-lbs (75 Nm)
Installation Instructions Mounting to a M5 Hole
Mounting to a M6 Hole
2
2
Example Mounting Bracket (Included with light)
1
1
3
Example Mounting Bracket (Included with light)
3 9 4
5 10
4
6
11
7
12
8
Step One: Determine whether you require a M5 or M6 bolt for the location you will be mounting the bracket. Once you have chosen your bolt size, select the matching bushing to go with the size and press into the bracket as illustrated above. Next adjust the amount of exposed thread to meet your requirements by interchanging the different length bolts and spacers. Offset Light Mount // SKU LAH.00.10000
Installation Instructions
This universal light mount kit is designed to be mounted in both vertical and horizontal positions. Be sure that the bracket is only bolted directly to the frame or frame elements of the bike. Do not mount to body clips or plastic fairings that are not directly bolted to the frame. Offset Light Mount // LAH.00.10000
Offset Light Mount Kit Universal Fit
1
Offset Bracket
2Socket Low Head
3
4 Spacer
Cap Screw
Spacer
Compatible with Denali: D1
D2
DM
DX
LAH.00.051
M8x12.....................DIN 7984
Da:12.7 Di:6.5 H:14.3
Da:12.7 Di:6.5 H:22.2
Qty........................2
Qty........................2
Qty.........................2
Qty.........................2
7
8
LAH.00.10000 Instruction Rev: 00 Twisted Throttle LLC 570 Nooseneck Hill Rd Exeter, RI 02822
Phone: 401.284.4200 Fax: 401.223.6954 www.twistedthrottle.com
PLEASE READ BEFORE INSTALLING TWISTED THROTTLE products should be installed by a qualified, experienced motorcycle technician. If you are unsure of your ability to properly install a product, please have the product installed by your local motorcycle dealer. TWISTED THROTTLE takes no responsibility for damages caused by improper installation. Medium strength liquid thread-locker (i.e., "Locktite") should be used to secure all screws, bolts, and nuts.
5
M6 Bushing
6
Lens Head Screw
Lens Head Screw
Lens Head Screw
BB.180.080.062.075.060.01
M6x30.................ISO 7380
M6x50.................ISO 7380
M6x60.................ISO 7380
Qty........................2
Qty.........................2
Qty.........................2
Qty.........................2
10
11
12
9 M5 Bushing
Lens Head Screw
Lens Head Screw
Lens Head Screw
BB.140.080.052.064.052.01
M5x30.................ISO 7380
M5x50.................ISO 7380
M5x60.................ISO 7380
Qty........................2
Qty.........................2
Qty.........................2
Qty.........................2
All screws, bolts, and nuts should be checked after driving the first 30 miles (50 km) to ensure that all are tightened to the proper torque. All screws, bolts, and nuts, including all replacement hardware provided by TWISTED THROTTLE should be tightened to the torque specified in the OEM maintenance manual for your motorcycle. If no torque specifications are provided in the OEM maintenance manual, the following torques may be used: M5.........................................................3.5 ft-lbs (5 Nm) M6.........................................................6.5 ft-lbs (9 Nm) M8........................................................16 ft-lbs (22 Nm) M10......................................................32 ft-lbs (43 Nm) M12..................................................... 55 ft-lbs (75 Nm)
Installation Instructions Mounting to a M5 Hole
Mounting to a M6 Hole
2
2
Example Mounting Bracket (Included with light)
1
1
3
Example Mounting Bracket (Included with light)
3 9 4
5 10
4
6
11
7
12
8
Step One: Determine whether you require a M5 or M6 bolt for the location you will be mounting the bracket. Once you have chosen your bolt size, select the matching bushing to go with the size and press into the bracket as illustrated above. Next adjust the amount of exposed thread to meet your requirements by interchanging the different length bolts and spacers. Offset Light Mount // SKU LAH.00.10000
Installation Instructions
This universal light mount kit is designed to be mounted in both vertical and horizontal positions. Be sure that the bracket is only bolted directly to the frame or frame elements of the bike. Do not mount to body clips or plastic fairings that are not directly bolted to the frame. Offset Light Mount // LAH.00.10000
