ofm 414 vam assembly
Models: 414 / 414-VAM Contract Upholstered Arm Chair Parts Listing A
Seat Brace 2 Units
C
Chair Seat 1 Unit
Assembly Instructions
B
STOP
Chair Frame (R/L) 2 Units
Tools Needed: Phillips Head Screwdriver Please read all instructions before assembly. Step 1: Insert Seat Braces (A) into the Chair Frame (B) holes. Step 2: Attach Chair Seat (C) to frame by inserting M6x45mm Screws (F) and Washers (G) through Seat Brace (A) and into the pre-drilled holes in the Chair Seat (C).Tighten screws with Allen Wrench (I), provided, or use screwdriver. Step 3: Attach Chair Back (D) to frame by inserting M6x20mm Screws (E) and Washers (G) through metal tabs and into the pre-drilled holes in the Chair Back (D). Tighten screws with Allen Wrench (I), provided, or use screwdriver. Step 4: Cover Screws (E) and metal tabs with Back Covers (H). Press firmly to secure. Step 5: Insert the adjustable Leveling Glides (J) into the bottomr of the chair legs, if desired.
D
Chair Back 1 Unit
1
E
M6x20mm Screw 4 Units
G
F
H
3
Back Cover 2 Units
E
I
Allen Wrench 1 Unit
C
M6x45mm Screw 4 Units
A Washer 8 Units
2
B
D
4
I
H
G
I 5
G
J
Leveling Glide 4 Units
F
J WEIGHT CAPACITY: 250 lbs. Assembly Notes: During assembly, hand tighten screws only. When all screws are in place, you may then tighten all screws completely. CAUTION: 1. Do not use this chair as a step ladder. 2. Check for loose screws and tighten them every 6 months. 06.04.2010
161 Tradition Trail, Holly Springs, NC, 27540 800-520-7471 (voice) 919-362-4765 (fax) 919-303-6389 (voice) www.ofminc.com [email protected]
Seat Brace 2 Units
C
Chair Seat 1 Unit
Assembly Instructions
B
STOP
Chair Frame (R/L) 2 Units
Tools Needed: Phillips Head Screwdriver Please read all instructions before assembly. Step 1: Insert Seat Braces (A) into the Chair Frame (B) holes. Step 2: Attach Chair Seat (C) to frame by inserting M6x45mm Screws (F) and Washers (G) through Seat Brace (A) and into the pre-drilled holes in the Chair Seat (C).Tighten screws with Allen Wrench (I), provided, or use screwdriver. Step 3: Attach Chair Back (D) to frame by inserting M6x20mm Screws (E) and Washers (G) through metal tabs and into the pre-drilled holes in the Chair Back (D). Tighten screws with Allen Wrench (I), provided, or use screwdriver. Step 4: Cover Screws (E) and metal tabs with Back Covers (H). Press firmly to secure. Step 5: Insert the adjustable Leveling Glides (J) into the bottomr of the chair legs, if desired.
D
Chair Back 1 Unit
1
E
M6x20mm Screw 4 Units
G
F
H
3
Back Cover 2 Units
E
I
Allen Wrench 1 Unit
C
M6x45mm Screw 4 Units
A Washer 8 Units
2
B
D
4
I
H
G
I 5
G
J
Leveling Glide 4 Units
F
J WEIGHT CAPACITY: 250 lbs. Assembly Notes: During assembly, hand tighten screws only. When all screws are in place, you may then tighten all screws completely. CAUTION: 1. Do not use this chair as a step ladder. 2. Check for loose screws and tighten them every 6 months. 06.04.2010
161 Tradition Trail, Holly Springs, NC, 27540 800-520-7471 (voice) 919-362-4765 (fax) 919-303-6389 (voice) www.ofminc.com [email protected]
